Graduate School

  • Japan

Research Output 1972 2020

Filter
Conference contribution
1991
1 Citation (Scopus)

A knowledge-based specification method of original requirements of computer communication system design

Kinoshita, T., Sugawara, K. & Shiratori, N., 1991, IEEE Pacific Rim Conference on Communications, Computers and Signal Processing Conference Proceedings. Anon (ed.). Piscataway, NJ, United States: Publ by IEEE, p. 380-383 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Communication systems
Systems analysis
Specifications
Knowledge acquisition
2 Citations (Scopus)

A quartz galvanometer for optical scanning in a laser printer application

Sugiyama, N., Yamazaki, D. & Ueda, T., 1991, Transducers '91. Piscataway, NJ, United States: Publ by IEEE, p. 734-737 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Galvanometers
Quartz
Scanning
Lasers
Micromachining

Considerations of time delays in information gathering, processing, decision-making and dispatching in power system operation

Tamura, Y., Ogata, T., Motoyoshi, T., Tayama, Y. & Nakanishi, Y., 1991, IFAC Symposia Series - Proceedings of a Triennial World Congress. Jaaksoo, U. & Utkin, V. I. (eds.). Publ by Pergamon Press Inc, Vol. 6. p. 79-84 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Time delay
Decision making
Controllers
Ordinary differential equations
Dynamical systems
14 Citations (Scopus)

Design and analysis of a flexible manufacturing system with simulation--Effects of flexibility on FMS performance

Morito, S., Takano, T., Mizukawa, H. & Mizoguchi, K., 1991 Dec, Winter Simulation Conference Proceedings. Piscataway, NJ, United States: Publ by IEEE, p. 294-301 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flexible Manufacturing Systems
Flexible manufacturing systems
System Performance
Flexibility
Pallets

Measurement of absolute distance employing a tunable CW dye laser

Ikezawa, K., Isozaki, K., Ogita, E. & Ueda, T., 1991 May, Conference Record - IEEE Instrumentation and Measurement Technology Conference. Anon (ed.). Piscataway, NJ, United States: Publ by IEEE, p. 122-125 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser tuning
Continuous wave lasers
Dye lasers
dye lasers
tunable lasers
4 Citations (Scopus)

Safety of casing shoe test and casing shoe integrity after testing

Morita, N., Fuh, G. F. & Boyd, P. A., 1991, Proceedings - SPE Annual Technical Conference and Exhibition. Richardson, TX, United States: Publ by Soc of Petroleum Engineers of AIME, Vol. Delta. p. 229-243 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

safety
Testing
Drilling fluids
drilling fluid
Numerical models
44 Citations (Scopus)

Typical sand production problems. Case studies and strategies for sand control

Morita, N. & Boyd, P. A., 1991, Proceedings - SPE Annual Technical Conference and Exhibition. Richardson, TX, United States: Publ by Soc of Petroleum Engineers of AIME, Vol. Omega. p. 801-812 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sand
sand
Engineers
1992
1 Citation (Scopus)

A 32×32 two-dimensional photodetector array using a-Si pin photodiodes and poly-Si TFTs integrated on a transparent substrate

Okamura, M., Kimura, K., Shirai, S. & Yamauchi, N., 1992 Jan 1, 1992 International Technical Digest on Electron Devices Meeting, IEDM 1992. Institute of Electrical and Electronics Engineers Inc., p. 685-688 4 p. 307452. (Technical Digest - International Electron Devices Meeting, IEDM; vol. 1992-December).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photodetectors
Photodiodes
Amorphous silicon
Polysilicon
amorphous silicon
81 Citations (Scopus)

New approach to preventing lost circulation while drilling

Fuh, G. F., Morita, N., Boyd, P. A. & McGoffin, S. J., 1992, Proceedings - SPE Annual Technical Conference and Exhibition. Richardson, TX, United States: Publ by Soc of Petroleum Engineers of AIME, Vol. Delta. p. 569-582 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Loss prevention
Drilling
drilling
Well drilling
Horizontal drilling
31 Citations (Scopus)

Perforation cavity stability: Comprehensive laboratory experiments and numerical analysis

Tronvoll, J., Morita, N. & Santarelli, F. J., 1992, Proceedings - SPE Annual Technical Conference and Exhibition. Richardson, TX, United States: Publ by Soc of Petroleum Engineers of AIME, Vol. Pi. p. 339-349 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

perforation
Convergence of numerical methods
Numerical analysis
cavity
Sand
4 Citations (Scopus)

Simultaneous optimization of nonlinear structural and control systems

Yamakawa, H., 1992, 4th Symposium on Multidisciplinary Analysis and Optimization, 1992. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 415-423 9 p. AIAA-92-4742-CP

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Control systems
Position control
Nonlinear programming
Robustness (control systems)
Dynamic analysis

Typical sand production problems. Case studies and strategies for sand control

Morita, N. & Boyd, P. A., 1992, Proceedings of the 1992 Western Regional Meeting. Anon (ed.). Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE), p. 9-20 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sand
Engineers
1993

Active learning algorithm of neural network

Hartono, P. & Hashimoto, S., 1993, Proceedings of the International Joint Conference on Neural Networks. Piscataway, NJ, United States: Publ by IEEE, Vol. 3. p. 2548-2551 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Learning algorithms
Neural networks
Problem-Based Learning
2 Citations (Scopus)

Core-based horizontal or highly inclined well stability analysis for unconsolidated formations

Morita, N. & Ross, C. K., 1993, Proceedings - SPE Annual Technical Conference and Exhibition. Anon (ed.). Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE), Vol. Delta. p. 187-200 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

stability analysis
mud
Boreholes
borehole stability
well
4 Citations (Scopus)

Exploration of a minimum tardiness dispatching priority for a flexible manufacturing system - a combined simulation / optimization approach

Morito, S., Lee, K. H., Mizoguchi, K. & Awane, H., 1993, Winter Simulation Conference Proceedings. Evans, G. W., Mollaghasemi, M., Russell, E. C. & Biles, W. E. (eds.). Piscataway, NJ, United States: Publ by IEEE, p. 829-836 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dispatching Rules
Simulation Optimization
Flexible Manufacturing Systems
Dispatching
Flexible manufacturing systems
6 Citations (Scopus)

Fuzzy coordination approach for multi-objective voltage and reactive power scheduling of an electric power system

Niimura, T., Yokoyama, R. & Cory, B. J., 1993, 1993 IEEE International Conference on Fuzzy Systems. Piscataway, NJ, United States: Publ by IEEE, p. 267-272 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric power systems
Reactive power
Scheduling
Fuzzy sets
Electric potential
7 Citations (Scopus)

Measurements of effective fracture toughness values for hydraulic fracture: Dependence on pressure and fluid rheology

Holder, J., Morita, N., Kenrick, A. J., Thallak, S. & Gray, K. E., 1993, Production Operations Symposium. Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE), p. 761-770 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rheology
Fracture toughness
Hydraulics
Fluids
Gels
2 Citations (Scopus)

Numerical evaluation of gravel-pack damage

Morita, N., 1993, Production Operations Symposium. Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE), p. 287-298 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gravel
Skin
Hydrocarbons
Statistics
Industry
1 Citation (Scopus)

Optimization of overtraining and overgeneration

Chakraborty, G., Shiratori, N. & Noguchi, S., 1993, Proceedings of the International Joint Conference on Neural Networks. Piscataway, NJ, United States: Publ by IEEE, Vol. 3. p. 2257-2262 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Classifiers
Neural networks

Quickly trained artificial neural network with single hidden layer Gaussian units

Chakraborty, G., Shiratori, N. & Noguchi, S., 1993, 1993 IEEE International Conference on Neural Networks. Anon (ed.). Piscataway, NJ, United States: Publ by IEEE, p. 466-472 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Neural networks
2 Citations (Scopus)

Silicon chemical vapor deposition from Si2Cl6 and Si3 Cl8

Numata, M., Kanamori, M., Sugiura, M. & Fuwa, A., 1993, First International Conference on Processing Materials for Properties. Warrendale, PA, United States: Publ by Minerals, Metals & Materials Soc (TMS), p. 1249-1252 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical vapor deposition
Silicon
Reaction intermediates
Scanning electron microscopy
Surface reactions

Transient finite element code: a versatile tool for well performance analyses

Morita, N., 1993, Rocky Mountain Regional Meeting/Low Permeability Reservoirs Symposium and Exhibition. Anon (ed.). Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE), p. 407-416 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transient analysis
1994

A study on multi-level structural optimum design using qualitative sensitivities

Arakawa, M. & Yamakawa, H., 1994, 5th Symposium on Multidisciplinary Analysis and Optimization, 1994. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 606-612 7 p. AIAA-94-4316-CP

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimum design
Structural design
1 Citation (Scopus)

Distributed Systems Management based on OSI environment: Problems, solutions, and their evaluation

Park, S. S. & Shiratori, N., 1994, Conference Proceedings - International Phoenix Conference on Computers and Communications. Piscataway, NJ, United States: Publ by IEEE, p. 384-392 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Network management
Network protocols
Information management
Computer systems
Concretes
16 Citations (Scopus)

Field and laboratory verifications of sand production prediction models

Morita, N., 1994, Proceedings - SPE International Symposium on Formation Damage Control. Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE), p. 19-28 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sand
prediction
laboratory
plan
method
1 Citation (Scopus)

Flexible service development support system for communication systems by reuse methodology

Huang, C. F., Karahasi, T., Lee, E. S. & Shiratori, N., 1994, Proceedings of the Internatoinal Conference on Parallel and Distributed Systems - ICPADS. Ni, L. M. (ed.). Los Alamitos, CA, United States: IEEE, p. 426-431 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Communication systems
Specifications
Experiments
4 Citations (Scopus)

Oriented perforations to prevent casing collapse for highly inclined wells

Morita, N. & McLeod, H. O., 1994, Proceedings - SPE Annual Technical Conference and Exhibition. pt 2 ed. Richardson, TX, United States: Society of Petroleum Engineers (SPE), Vol. Pi. p. 427-437 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

perforation
Numerical analysis
Drilling
Sand
well
5 Citations (Scopus)

Rock mechanics aspects of drilling and completing highly inclined wells in weak formations

Morita, N. & Whitebay, L., 1994, Proceedings of the University of Tulsa Centennial Petroleum Engineering Symposium. Richardson, TX, United States: Society of Petroleum Engineers (SPE), p. 265-276 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rock mechanics
rock mechanics
Drilling
drilling
well

Unified multidisciplinary optimum design method using genetic algorithms

Yamakawa, H., 1994, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. New York, NY, United States: ASME, Vol. 69-2. p. 329-334 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Genetic algorithms
Hierarchical systems
Railroad cars
Optimum design
1995
6 Citations (Scopus)

Agent-oriented architecture for flexible networks

Sugawara, K., Suganuma, T., Chakraborty, G., Moser, M., Kinoshita, T. & Shiratori, N., 1995, Proceedings of the International Symposium on Autonomous Decentralized Systems. Anon (ed.). Piscataway, NJ, United States: IEEE, p. 135-141 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Telecommunication networks
Distributed power generation

Application of CBR approach for electrical equipment layout design

Itakura, S., Okada, K. & Yokoyama, R., 1995, IEEE International Conference on Fuzzy Systems. Anon (ed.). Piscataway, NJ, United States: IEEE, Vol. 4. p. 2063-2068 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Case based reasoning
3 Citations (Scopus)

Application of interior point quadratic programming algorithm to power system optimization problems

Wei, H., Sasaki, H. & Yokoyama, R., 1995, IEEE Power Industry Computer Applications Conference. Piscataway, NJ, United States: IEEE, p. 98-104 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quadratic programming
16 Citations (Scopus)

Automated feature extraction of face image and its applications

Kobayashi, S. & Hashimoto, S., 1995, Robot and Human Communication - Proceedings of the IEEE International Workshop. p. 164-169 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Speech recognition
Feature extraction
Acoustic waves
Data storage equipment

Balanced truncation preserving poles in a specified disk

Watanabe, T., Yasuda, K. & Yokoyama, R., 1995, Proceedings of the SICE Annual Conference. Tokyo, Japan: Society of Instrument and Control Engineers (SICE), p. 1387-1390 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Poles
4 Citations (Scopus)

Combination of multiplicative congruential random-number generators with safe prime modulus

Sakamoto, M. & Morito, S., 1995, Winter Simulation Conference Proceedings. IEEE, p. 309-315 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Random number Generator
Multiplicative
Modulus
Lowest common multiple
Serial Correlation
1 Citation (Scopus)

Decentralized social algorithm for committee coordination problem

Huang, T., Cheng, Z., Osano, M. & Shiratori, N., 1995, Proceedings of the International Symposium on Autonomous Decentralized Systems. Anon (ed.). Piscataway, NJ, United States: IEEE, p. 345-351 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parallel algorithms

Extension of protocol synthesis to structured entities

Bahadur Bista, B., Togashi, A. & Shiratori, N., 1995, International Conference on Network Protocols. Los Alamitos, CA, United States: IEEE, p. 66-73 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Network protocols
Specification languages
Finite automata
Communication systems
Communication

Flexible computing: basic concepts, design and application

Shiratori, N., Chakraborty, G. & Sugawara, K., 1995, Proceedings of the IEEE Computer Society Workshop on Future Trends of Distributed Computing Systems. Los Alamitos, CA, United States: IEEE, p. 152-159 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Distributed computer systems
Merging
Communication

Framework for flexible networking

Moser, M., Sugiura, S., Sugawara, K. & Shiratori, N., 1995, International Conference on Network Protocols. Los Alamitos, CA, United States: IEEE, p. 226-233 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High level languages
Computer networks
Availability
3 Citations (Scopus)

Growing network that optimizes between undertraining and overtraining

Chakraborty, G., Murakami, M., Shiratori, N. & Noguchi, S., 1995, IEEE International Conference on Neural Networks - Conference Proceedings. Piscataway, NJ, United States: IEEE, Vol. 2. p. 1116-1120 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedforward neural networks
Classifiers
6 Citations (Scopus)

Multimedia sensing system for robot

Kurata, T., Chang, D. & Hashimoto, S., 1995, Robot and Human Communication - Proceedings of the IEEE International Workshop. p. 83-88 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Acoustic waves
Synchronization
Microphones
Processing
31 Citations (Scopus)

Neural network approach to multicast routing in real-time communication networks

Pornavalai, C., Chakraborty, G. & Shiratori, N., 1995, International Conference on Network Protocols. Los Alamitos, CA, United States: IEEE, p. 332-339 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Telecommunication networks
Quality of service
Neural networks
Hopfield neural networks
Multicasting
2 Citations (Scopus)

Neural networks for solving Constrained Steiner Tree problem

Pornavalai, C., Chakraborty, G. & Shiratori, N., 1995, IEEE International Conference on Neural Networks - Conference Proceedings. Piscataway, NJ, United States: IEEE, Vol. 4. p. 1867-1870 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Neural networks
Hopfield neural networks
Computer simulation
Costs
16 Citations (Scopus)

Optimal deployment of fuel cells in distribution systems by using genetic algorithms

Zoka, Y., Sasaki, H., Kubokawa, J., Yokoyama, R. & Tanaka, H., 1995, Proceedings of the IEEE Conference on Evolutionary Computation. Piscataway, NJ, United States: IEEE, Vol. 1. p. 479-484 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel cells
Genetic algorithms
Combinatorial optimization
Electric power distribution
Explosions

Proposal for a connection method to a public network using infrared media

Matsumoto, M. & Saito, R., 1995, Annual International Conference on Universal Personal Communications - Record. Piscataway, NJ, United States: IEEE, p. 506-511 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Infrared radiation
Consumer products
Communication
Personal digital assistants
Modems
2 Citations (Scopus)

Security enhancement of electric power systems by approximate reasoning

Niimura, T. & Yokoyama, R., 1995, IEEE International Conference on Fuzzy Systems. Anon (ed.). Piscataway, NJ, United States: IEEE, Vol. 1. p. 205-210 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric power systems
Fuzzy sets
Power generation
Scheduling

Similarity for reuse of specifications in communication software development

Yamamoto, U., Lee, E. S. & Shiratori, N., 1995, International Conference on Network Protocols. Los Alamitos, CA, United States: IEEE, p. 22-29 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Software engineering
Specifications
Communication

Society of cooperative agents on the information network: towards intelligent information gathering

Okada, R., Lee, E. S. & Shiratori, N., 1995, International Conference on Network Protocols. Los Alamitos, CA, United States: IEEE, p. 218-225 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Intelligent networks
Internet
2 Citations (Scopus)

Study on heredity and evolution of designs considering Kansei by using genetic algorithms

Yamakawa, H., Arakawa, M. & Katsuyama, N., 1995, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Gadh, R. (ed.). 2 Pt 2 ed. New York, NY, United States: ASME, Vol. 83. p. 727-732 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Genetic algorithms
Railroad cars
Semantics
5 Citations (Scopus)

Study on optimum design using fuzzy numbers as design variables

Arakawa, M. & Yamakawa, H., 1995, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. 1 ed. Vol. 82. p. 463-469 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuzzy sets
Defects
Optimum design