School of Creative Science and Engineering

  • Japan

Research Output

Filter
Paper
Paper

[PE1-019] Effect of FeOx on the liquidus line of the Al2O3-CaO-SiO2-Cr2O 3 system at 1573K

Fujiwara, D., Sekimoto, H. & Yamaguchi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

[PE1-019] Effect of FeO x on the liquidus line of the Al 2 O 3 -CaO-SiO 2 -Cr 2 O 3 system at 1573K

Fujiwara, D., Sekimoto, H. & Yamaguchi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

A biological humanoid joint controller based on muscle model

Meng, F., Chen, X., Xue, J., Wang, C., Shi, Q., Takanishi, A. & Huang, Q., 2013 Jan 1, p. 1336-1340. 5 p.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Accelerating rat's learning speed using a robot - The robot autonomously shows rats its functions

Ishii, H., Nakasuji, M., Ogura, M., Miwa, H. & Takanishi, A., 2004 Dec 1, p. 229-234. 6 p.

Research output: Contribution to conferencePaper

8 Citations (Scopus)

Actual using condition of windows in public elementary schools with airconditioning systems

Kawada, K., Tanabe, S. I., Fujinami, K. & Kim, J., 2009 Dec 1.

Research output: Contribution to conferencePaper

Adaptive masticatory jaw motion using jaw position and biting force information

Takanobu, H., Tanase, T., Takanishi, A. & Kato, I., 1994 Dec 1, p. 360-365. 6 p.

Research output: Contribution to conferencePaper

8 Citations (Scopus)

A flipped classroom experience: The lateral instability phenomenon

Sgambi, L., Nowicki, A., Basso, N. & Garavaglia, E., 2017 Jan 1, p. 288-295. 8 p.

Research output: Contribution to conferencePaper

A fundamental study on the molybdenum recovery from the copper smelting slag by slow cooling

Sudo, S., Okura, T. & Tokoro, C., 2013 Oct 8, p. 689-702. 14 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Analysis of influence of lifestyle and season on residential electric power consumption by using a fine-grained power sensing system

Takenaka, T., Unno, G., Endo, A. & Tanabe, S. I., 2014 Jan 1, p. 447-452. 6 p.

Research output: Contribution to conferencePaper

Analysis of self-tagging during conversational chat in multilingual gaming simulation

Nose, T. & Hishiyama, R., 2013 Jan 1, p. 81-86. 6 p.

Research output: Contribution to conferencePaper

4 Citations (Scopus)

An animal psychological approach for personal robot design - Interaction between a rat and a rat-robot

Aoki, T., Watanabe, T., Miwa, H. & Takanishi, A., 2000 Dec 1, p. 365-370. 6 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

A new memory model for humanoid robots -introduction of associative memory using chaotic neural network

Itoh, K., Miwa, H., Nukariya, Y., Takanobu, H. & Takanishi, A., 2004 Dec 1, p. 125-130. 6 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

An experimental study on mechanical properties and constitutive equation of SBHS500

Hashimoto, S., Ono, K. & Okada, S., 2013.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

An experimental study on mechanical properties of SBHS700 and application of SBHS700 to stiffened plates

Hamamura, K., Ono, K., Matsumura, M., Tarui, T. & Koda, S., 2013.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

A novel approach to evaluate skills in Endotracheal Intubation using biomechanical measurement system

Matsuoka, Y., Bartolomeo, L., Chihara, T., Imtiaz, U., Saito, K., Kong, W., Noh, Y., Kasuya, Y., Nagai, M., Ozaki, M., Wang, C., Sessa, S., Ishii, H., Zecca, M. & Takanishi, A., 2013 Jan 1, p. 1456-1461. 6 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

A simulation method for 3-dimension needle invasive medical treatments of cancer infected liver

Zamani, M. K., Tomoyuki, M. & Yamakawa, H., 2007 Dec 1, p. 43-49. 7 p.

Research output: Contribution to conferencePaper

A study of estimating remaining values of rechargeable batteries for closed-loop supply chains

Tanaka, K. & Tanimizu, Y., 2018.

Research output: Contribution to conferencePaper

A study on measuring of reinforced-concrete structure by 3D laser scanner and making design of pre-cut interior finishing components with polygon model

Ishida, K., Kano, N., Igarashi, T., Fujii, H., Oosawa, Y., Sakamoto, S. & Tomita, H., 2013 Jan 1, p. 1208-1215. 8 p.

Research output: Contribution to conferencePaper

Open Access
1 Citation (Scopus)

A study on modeling of stress-strain relationship and panel points of steel truss bridges used in dynamic response analysis

Michitani, A., Ono, K. & Nishimura, N., 2013.

Research output: Contribution to conferencePaper

A study on route/fleet selection problem for scm -using the property of latin square and ga

Chiba, M., Sorimachi, T. & Yoshimoto, K., 2006 Dec 1, p. 1285-1296. 12 p.

Research output: Contribution to conferencePaper

A study on the optimization method for panel layout problem in drywall

Ishida, K. & Kano, N., 2011, p. 373-374. 2 p.

Research output: Contribution to conferencePaper

Open Access
1 Citation (Scopus)
1 Citation (Scopus)

A System Design for Tactile Recognition of Human-Robot Contact State

Iwata, H. & Sugano, S., 2003 Dec 26, p. 7-12. 6 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Basic examination on assessing mechanical properties of concrete that has suffered combined deterioration from fatigue and frost damage

Hayashida, H., Sato, Y. & Ueda, T., 2016, p. 186-193. 8 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Case study on the actual design and operation of a radiant cooling and heating system in Japan

Miyashita, Y., Tanabe, S., Kuzuu, E. & Ishii, Y., 2015 Jan 1.

Research output: Contribution to conferencePaper

Checklist-based assessment method for environmentally conscious design

Kishita, Y., Low, B. H., Fukushige, S., Umeda, Y., Suzuki, A. & Kawabe, T., 2009.

Research output: Contribution to conferencePaper

Chemical surface mechanisms in rapid solid-liquid separation of sludge from HD-sludge recycling of AMD (Horobetsu)

Badulis, G. C., Tokoro, C. & Sasaki, H., 2005 Dec 1, p. 421-437. 17 p.

Research output: Contribution to conferencePaper

Clinical training with mouth opening and closing training robot WY-3

Takanobu, H., Nakazawa, M., Takanishi, A., Ohtsuki, K. & Ohnishi, M., 1999 Dec 1, p. 1604-1609. 6 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Collision force suppression by human-friendly robots with passively movable base

Lim, H. O., Yokoi, K., Takanishi, A. & Tanie, K., 1999 Dec 1, p. 1039-1044. 6 p.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Collision-tolerant end-effector position control for mobile manipulator

Lim, H. O., Yokoi, K., Chong, N. Y., Oh, S. R., Tanie, K. & Takanishi, A., 1997 Dec 1. 1 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Comfortable thermal environment for people sensitive to cold in housing during summer

Tsuzuki, H., Tanabe, S. I., Sato, Y. & Saito, M., 2014 Jan 1, p. 730-736. 7 p.

Research output: Contribution to conferencePaper

Comparison of several liberation models considering preferential breakage at phase boundaries

Owada, S., Ohmiya, T., Morikawa, T. & Ito, M., 2006 Dec 1, p. 1800-1805. 6 p.

Research output: Contribution to conferencePaper

Comparison of two human thermoregulation models using stable and transient conditions

Ogata, M., Streblow, R., Tanabe, S. & Mueller, D., 2015 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Comparison of workplace environment and energy consumption in green building by improving operation during summer

Aoki, G., Tanabe, S., Nishihara, N., Wada, K., Hirota, S., Hidari, K., Takahashi, M., Ishii, Y. & Tsuzuki, H., 2015 Jan 1.

Research output: Contribution to conferencePaper

Concentration of bis(2-ethyhexyl) phthalate on the surface of polyvinyl chloride flooring

Kim, H. & Tanabe, S., 2015 Jan 1.

Research output: Contribution to conferencePaper

Concentration of PGMs from automobile catalyst by combining surface grinding and quenching

Liu, G., Tokumaru, A. & Owada, S., 2013 Oct 8, p. 235-254. 20 p.

Research output: Contribution to conferencePaper

Consolidation property of a highly compressible construction waste sludge

Ibaraki, M., Sasahara, T., Sugawara, Y. & Akaki, H., 2018 Jan 1.

Research output: Contribution to conferencePaper

Construction of KANSEI model for the planning of bowing in violin playing

Shibuya, K., Tanabe, H., Asada, T. & Sugano, S., 1996 Dec 1, p. 422-427. 6 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Control of a mastication robot for reduction of jaw joint force focusing on musculus temporalis

Takanobu, H., Takanishi, A. & Kato, I., 1994 Dec 1, p. 1824-1831. 8 p.

Research output: Contribution to conferencePaper

4 Citations (Scopus)

Control of rapid closing motion of a robot jaw using nonlinear spring mechanism

Takanobu, H., Kuchiki, N. & Takanishi, A., 1995 Jan 1, p. 372-377. 6 p.

Research output: Contribution to conferencePaper

5 Citations (Scopus)

Creating a net zero energy house in Japan

Matsunaga, T., Tanabe, S., Nagasawa, N., Hayashi, Y. & Watanabe, N., 2015 Jan 1.

Research output: Contribution to conferencePaper

Creation of amorphous ettringite using low temperature dehydration and influence of dehydration temperature on the boron removal amount

Hobo, S., Granata, G., Tokoro, C., Tanaka, Y. & Nakamura, T., 2017 Jan 1.

Research output: Contribution to conferencePaper

Open Access

Design methodology for mass reduction of a mechanical product by extracting minimum structure

Fukushige, S., Taniyama, S. & Umeda, Y., 2007.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Design of a battery-powered multi-purpose bipedal locomotor with parallel mechanism

Sugahara, Y., Endo, T., Lim, H. O. & Takanishi, A., 2002 Jan 1, p. 2658-2663. 6 p.

Research output: Contribution to conferencePaper

52 Citations (Scopus)

Design of Autonomous Decentralized Mobility System: Implementation for ITS services using DSRC

Shimura, A., Hiraiwa, M. & Sugano, S., 2008 Dec 1, p. 375-382. 8 p.

Research output: Contribution to conferencePaper

Design of biped walking robots having antagonistic driven joints using nonlinear spring mechanism

Yamaguchi, J. & Takanishi, A., 1997 Dec 1, p. 251-259. 9 p.

Research output: Contribution to conferencePaper

30 Citations (Scopus)

Design optimization of artificial heart blood pumps based on hemolysis testing

Umezu, M., 1994 Dec 1, p. 33-34. 2 p.

Research output: Contribution to conferencePaper

6 Citations (Scopus)

Development of a bipedal humanoid robot having antagonistic driven joints and three DOF trunk

Yamaguchi, J., Inoue, S., Nishino, D. & Takanishi, A., 1998 Dec 1, p. 96-101. 6 p.

Research output: Contribution to conferencePaper

74 Citations (Scopus)