School of Creative Science and Engineering

  • Japan

Research Output

Filter
Article
2016

Computational thermo-fluid analysis of a disk brake

Takizawa, K., Tezduyar, T. E., Kuraishi, T., Tabata, S. & Takagi, H., 2016 Feb 15, (Accepted/In press) In : Computational Mechanics. p. 1-13 13 p.

Research output: Contribution to journalArticle

50 Citations (Scopus)

Condition based renewal and maintenance integrated planning

Iijima, H. & Takata, S., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Contact force model including the liquid-bridge force for wet-particle simulation using the discrete element method

Tsunazawa, Y., Fujihashi, D., Fukui, S., Sakai, M. & Tokoro, C., 2016 Mar 1, In : Advanced Powder Technology. 27, 2, p. 652-660 9 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Continuous maintenance and the future - Foundations and technological challenges

Roy, R., Stark, R., Tracht, K., Takata, S. & Mori, M., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

108 Citations (Scopus)

Design and characterization of a three-axis hall effect-based soft skin sensor

Tomo, T. P., Somlor, S., Schmitz, A., Jamone, L., Huang, W., Kristanto, H. & Sugano, S., 2016 Apr 7, In : Sensors (Switzerland). 16, 4

Research output: Contribution to journalArticle

40 Citations (Scopus)

Design and construction of zero energy house: - Waseda University "Nobi-Nobi HOUSE"

Nagasawa, N., Shibutani, A., Matsunaga, T., Tanabe, S., Furuya, N., Watanabe, N., Hirohashi, W. & Hayashi, Y., 2016 Oct 1, In : AIJ Journal of Technology and Design. 22, 52, p. 1049-1052 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
1 Citation (Scopus)

Development and application of the renewable energy regional optimization utility tool for environmental sustainability: REROUTES

Hori, K., Matsui, T., Hasuike, T., Fukui, K. I. & Machimura, T., 2016 Aug 1, In : Renewable Energy. 93, p. 548-561 14 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Development of a Humorous Humanoid Robot Capable of Quick-and-Wide Arm Motion

Kishi, T., Shimomura, S., Futaki, H., Yanagino, H., Yahara, M., Cosentino, S., Nozawa, T., Hashimoto, K. & Takanishi, A., 2016 Jul 1, In : IEEE Robotics and Automation Letters. 1, 2, p. 1081-1088 8 p., 7409982.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2 Citations (Scopus)

Development of a new pericardiocentesis assist device: Design proposal and evaluation of the pericardium grasping mechanism

Fukushima, Y., Akita, R., Naemura, K. & Tsukihara, H., 2016 Aug 1, In : Journal of Robotics and Mechatronics. 28, 4, p. 591-599 9 p.

Research output: Contribution to journalArticle

Discovery of extremely REY-rich mud in the western North Pacific Ocean

Iijima, K., Yasukawa, K., Fujinaga, K., Nakamura, K., Machida, S., Takaya, Y., Ohta, J., Haraguchi, S., Nishio, Y., Usui, Y., Nozaki, T., Yamazaki, T., Ichiyama, Y., Ijiri, A., Inagaki, F., Machiyama, H., Suzuki, K. & Kato, Y., 2016, In : Geochemical Journal. 50, 6, p. 557-573 17 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)

Dynamic measurements of the load on gray cast iron castings and contraction of castings during cooling in furan sand molds

Marumoto, N., Kashimura, H., Yoshida, K., Toyoda, T., Okane, T. & Yoshida, M., 2016 Nov 1, In : Journal of Materials Processing Technology. 237, p. 48-54 7 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Effect of Mn addition on the age-hardening behavior of an Al-(9-10)%Si-0.3%Mg die casting alloy in T5 and T6 heat treatment

Fukasawa, K., Mohri, R., Ohtake, T., Inoue, T., Kuroda, A., Kambe, H. & Yoshida, M., 2016, In : Materials Transactions. 57, 6, p. 959-965 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Elasto-Plastic-Creep Constitutive Equation of an Al-Si-Cu High-Pressure Die Casting Alloy for Thermal Stress Analysis

Motoyama, Y., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2016 Nov 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 11, p. 5598-5608 11 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Energy reduction rate in a hospital: Examination of the correction method for the energy consumption reduction rate with consideration for the temperature difference in the hospital

Tsunoda, K., Asano, Y., Takamura, H., Iwai, K., Hara, E., Takaguchi, H., Kametani, S., Matsunawa, K., Sakamoto, Y., Bougaki, K. & Murakami, S., 2016 Feb, In : AIJ Journal of Technology and Design. 22, 50, p. 183-187 5 p.

Research output: Contribution to journalArticle

Engineering approach to the design of wooden fireproof structural elements based on the sacrifice-layer concept: Optimum design of the wood-based protection layers using bench-scale tests

Yamaguchi, T., Kamikawa, D., Hasemi, Y., Yasui, N., Takase, R., Miyabayashi, M. & Suzuki, J. I., 2016 Dec 1, In : Journal of Environmental Engineering (Japan). 81, 730, p. 1065-1074 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
10 Citations (Scopus)

Environmental surface contaminaion examined by atp assay before and after terminal room cleaning in patient rooms

Ogata, M., Iijima, M., Matsumura, M., Tsutsumi, H., Hori, S. & Tanabe, S., 2016 Aug 1, In : Journal of Environmental Engineering (Japan). 81, 726, p. 723-729 7 p.

Research output: Contribution to journalArticle

Environmental surface contamination measured by ATP assay and attitude survey of medical and cleaning staff in the examination room

Matsumura, M., Fujiwara, M., Ogata, M., Tsutsumi, H., Hori, S. & Tanabe, S., 2016, In : Journal of Environmental Engineering (Japan). 81, 728, p. 893-899 7 p.

Research output: Contribution to journalArticle

Erratum: Evacuation behavior and fatality rate during the 2011 Tohoku-Oki Earthquake and Tsunami (Earthquake Spectra (2015) 31 (1237-1265))

Yun, N. Y. & Hamada, M., 2016 Feb 1, In : Earthquake Spectra. 32, 1, p. 651 1 p.

Research output: Contribution to journalArticle

Estimation of increase in storm surge damage due to climate change and sea level rise in the Greater Tokyo area

Hoshino, S., Esteban, M., Mikami, T., Takagi, H. & Shibayama, T., 2016 Jan 1, In : Natural Hazards. 80, 1, p. 539-565 27 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Evacuation safety strategy for nursery school children based on the survey of the evacuation behavior drill fire safety planning for nursery school Part.l

Furukawa, Y., Sano, T., Tsuchiya, S., Fujii, K., Satoh, T., Hatakeyama, Y. & Hasemi, Y., 2016, In : Journal of Environmental Engineering (Japan). 81, 728, p. 845-853 9 p.

Research output: Contribution to journalArticle

Executing optimized throwing motion on robot arm with free joint

Kim, C. H. & Sugano, S., 2016 Dec 16, In : Advanced Robotics. 30, 24, p. 1571-1578 8 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Experimental analysis of debris motion due the obstruction from fixed obstacles in tsunami-like flow conditions

Goseberg, N., Stolle, J., Nistor, I. & Shibayama, T., 2016 Dec 1, In : Coastal Engineering. 118, p. 35-49 15 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)
27 Citations (Scopus)

Fabrication of micro-gelatin fiber utilizing coacervation method

Arai, T., Tanaka, R., Sakaguchi, K. & Umezu, S., 2016 Dec 23, (Accepted/In press) In : Artificial Life and Robotics. p. 1-6 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Factor analysis on electricity conservation rates in welfare facilities - Analysis based on the results of investigation for development of the DECC

Kindaichi, S., Nishina, D., Murakawa, S., Kametani, S., Takaguchi, H., Hanzawa, H., Yoshino, H., Asano, Y., Okumiya, M., Shimoda, Y., Yoda, H., Sakamoto, Y., Bogaki, K. & Murakami, S., 2016 Jun 1, In : AIJ Journal of Technology and Design. 22, 51

Research output: Contribution to journalArticle

Field measurment of SVOC in indoor air and house dust in residential buildings

Kim, H. & Tanabe, S., 2016 Feb 1, In : Journal of Environmental Engineering (Japan). 81, 720, p. 199-207 9 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Flow control for cell growth by movement of magnetic particles utilizing electromagnetic force

Umezu, S., 2016 Jan 29, (Accepted/In press) In : Artificial Life and Robotics. p. 1-4 4 p.

Research output: Contribution to journalArticle

Footstep Planning for Slippery and Slanted Terrain Using Human-Inspired Models

Brandao, M., Hashimoto, K., Santos-Victor, J. & Takanishi, A., 2016 Jul 13, (Accepted/In press) In : IEEE Transactions on Robotics.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Future typhoon and storm surges under different global warming scenarios: case study of typhoon Haiyan (2013)

Nakamura, R., Shibayama, T., Esteban, M. & Iwamoto, T., 2016 Feb 25, (Accepted/In press) In : Natural Hazards. p. 1-37 37 p.

Research output: Contribution to journalArticle

30 Citations (Scopus)

Geochemistry of REY-rich mud in the Japanese Exclusive Economic Zone around Minamitorishima Island

Fujinaga, K., Yasukawa, K., Nakamura, K., Machida, S., Takaya, Y., Ohta, J., Araki, S., Liu, H., Usami, R., Maki, R., Haraguchi, S., Nishio, Y., Usui, Y., Nozaki, T., Yamazaki, T., Ichiyama, Y., Ijiri, A., Inagaki, F., Machiyama, H., Iijima, K. & 2 others, Suzuki, K. & Kato, Y., 2016, In : Geochemical Journal. 50, 6, p. 575-590 16 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Geo-Environmental Knowledge for the Adaptation of Riverine Coastal Geo-Hazards

Yasuhara, K., Cong, V. T., Komine, H. & Hazarika, H., 2016, In : Unknown Journal. 2016-January, 269 GSP, p. 264-273 10 p.

Research output: Contribution to journalArticle

Geological factors responsible for REY-rich mud in the western North Pacific Ocean: Implications from mineralogy and grain size distributions

Ohta, J., Yasukawa, K., Machida, S., Fujinaga, K., Nakamura, K., Takaya, Y., Iijima, K., Suzuki, K. & Kato, Y., 2016, In : Geochemical Journal. 50, 6, p. 591-603 13 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Grain refinement effects on the strain rate sensitivity and grain boundary sliding in partially solidified Al-5 wt%Mg alloy

Takai, R., Kimura, S., Kashiuchi, R., Kotaki, H. & Yoshida, M., 2016 Jun 14, In : Materials Science and Engineering A. 667, p. 417-425 9 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Ground Improvement by the Freezing Method for Underground Space Utilization

Afshani Mehrabad, A. & Akaki, H., 2016, In : Unknown Journal. 2016-January, 271 GSP, p. 778-786 9 p.

Research output: Contribution to journalArticle

Growth dynamics of vaterite in relation to the physico-chemical properties of its precursor, amorphous calcium carbonate, in the Ca-CO3-PO4 system

Sugiura, Y., Onuma, K. & Yamazaki, A., 2016 Jan 1, In : American Mineralogist. 101, 2, p. 289-296 8 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Head stabilization in a humanoid robot: models and implementations

Falotico, E., Cauli, N., Kryczka, P., Hashimoto, K., Berthoz, A., Takanishi, A., Dario, P. & Laschi, C., 2016 Jul 1, (Accepted/In press) In : Autonomous Robots. p. 1-17 17 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)
48 Citations (Scopus)

Heel-Contact Toe-Off Walking Pattern Generator Based on the Linear Inverted Pendulum

Shiguematsu, Y. M., Kryczka, P., Hashimoto, K., Lim, H. O. & Takanishi, A., 2016 Mar 1, In : International Journal of Humanoid Robotics. 13, 1, 1650002.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Hollow Structure Improved Anti-Cancer Immunity of Mesoporous Silica Nanospheres In Vivo

Wang, X., Li, X., Ito, A., Yoshiyuki, K., Sogo, Y., Watanabe, Y., Yamazaki, A., Ohno, T. & Tsuji, N. M., 2016, (Accepted/In press) In : Small.

Research output: Contribution to journalArticle

37 Citations (Scopus)

Identification and application of Phyto-Fenton reactions

Inagaki, Y., Cong, V. H. & Sakakibara, Y., 2016 Feb 1, In : Chemosphere. 144, p. 1443-1450 8 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Identification of yield drift deformations and evaluation of the degree of damage through the direct sensing of drift displacements

Xiang, P., Nishitani, A., Marutani, S., Kodera, K., Hatada, T., Katamura, R., Kanekawa, K. & Tanii, T., 2016 Oct 25, In : Earthquake Engineering and Structural Dynamics. 45, 13, p. 2085-2102 18 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Improving IMES localization accuracy by integrating dead reckoning information

Fujii, K., Arie, H., Wang, W., Kaneko, Y., Sakamoto, Y., Schmitz, A. & Sugano, S., 2016 Jan 27, In : Sensors (Switzerland). 16, 2

Research output: Contribution to journalArticle

4 Citations (Scopus)

Integrating energy efficiency analysis of massive MIMO-based C-RAN

Zhang, D., Tariq, M., Mumtaz, S., Rodriguez, J. & Sato, T., 2016 Dec 1, In : Eurasip Journal on Wireless Communications and Networking. 2016, 1, 277.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Investigation of part detachment process from printed circuit boards for effective recycling using particle-based simulation

Tsunazawa, Y., Tokoro, C., Matsuoka, M., Owada, S., Tokuichi, H., Oida, M. & Ohta, H., 2016, In : Materials Transactions. 57, 12, p. 2146-2152 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

In vivo vascularization of cell sheets provided better long-term tissue survival than injection of cell suspension

Takeuchi, R., Kuruma, Y., Sekine, H., Dobashi, I., Yamato, M., Umezu, M., Shimizu, T. & Okano, T., 2016 Aug 1, In : Journal of Tissue Engineering and Regenerative Medicine. 10, 8, p. 700-710 11 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)

Joint mechanism that mimics elastic characteristics in human running

Otani, T., Hashimoto, K., Isomichi, T., Sakaguchi, M., Kawakami, Y., Lim, H. O. & Takanishi, A., 2016 Mar 1, In : Machines. 4, 1, 5.

Research output: Contribution to journalArticle

8 Citations (Scopus)