School of Creative Science and Engineering

  • Japan

Research Output

Filter
Article
Article

Design for separating performance of grinding media in bead mill by DEM simulation

Hisatomi, S., Fukui, S., Matsuoka, M., Tsunazawa, Y., Tokoro, C., Okuyama, K., Iwamoto, M. & Sekine, Y., 2017 Jan 1, In : Journal of the Society of Powder Technology, Japan. 54, 6, p. 377-383 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Design improvement of the Jellyfish valve for long-term use in artificial hearts

Iwasaki, K., Umezu, M., Imachi, K., Iijima, K. & Fujimoto, T., 2001, In : International Journal of Artificial Organs. 24, 7, p. 463-469 7 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Designing guide-path networks for automated guided vehicle system by using the Q-learning technique

Lim, J. K., Lim, J. M., Yoshimoto, K., Kim, K. H. & Takahashi, T., 2003 Jan 1, In : Computers and Industrial Engineering. 44, 1, p. 1-17 17 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Design intent and thermal performance of facade thermal design methods in glass facade architecture in Tokyo

Lto, H., Yoneda, T., Kawada, K., Kim, J. & Tanabe, S. I., 2009 Dec 1, In : Journal of Environmental Engineering. 74, 646, p. 1347-1354 8 p.

Research output: Contribution to journalArticle

Design method of material handling systems for lean automation-Integrating equipment for reducing wasted waiting time

Yamazaki, Y., Shigematsu, K., Kato, S., Kojima, F., Onari, H. & Takata, S., 2017, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

6 Citations (Scopus)

DESIGN OF AN INTERACTIVE COMPUTER SOFTWARE SYSTEM FOR THE FREQUENCY-ASSIGNMENT PROBLEM.

Mathur, K., Salkin, H. M., Nishimura, K. & Morito, S., 1984 Nov, In : IEEE Transactions on Electromagnetic Compatibility. EMC-26, 4, p. 207-212 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Design of a surgical robot with dynamic vision field control for Single Port Endoscopic Surgery.

Kobayashi, Y., Sekiguchi, Y., Tomono, Y., Watanabe, H., Toyoda, K., Konishi, K., Tomikawa, M., Ieiri, S., Tanoue, K., Hashizume, M. & Fujie, M. G., 2010, In : Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. p. 979-983 5 p.

Research output: Contribution to journalArticle

Design of human-powered hybrid electric-power shovel for deep excavation

Matsuura, N., Hatano, Y., Iizuka, T., Fujisawa, T. & Uesugi, S., 2017, In : Proceedings of the International Conference on Engineering Design, ICED. 1, DS87-1, p. 499-508 10 p.

Research output: Contribution to journalArticle

Design of zeolite boiler in thermochemical energy storage and transport system utilizing unused heat from sugar mill

Fujii, S., Horie, N., Nakaibayashi, K., Kanematsu, Y., Kikuchi, Y. & Nakagaki, T., 2019 Mar 15, In : Applied Energy. 238, p. 561-571 11 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2 Citations (Scopus)

Design proposal for walking cane handle grips

Taniguchi, K. & Takanishi, A., 2014, In : Gerontechnology. 13, 2, p. 287 1 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Detachable Body: The Impact of Binocular Disparity and Vibrotactile Feedback in Co-Presence Tasks

Iwasaki, Y., Ando, K., Iizuka, S., Kitazaki, M. & Iwata, H., 2020 Apr, In : IEEE Robotics and Automation Letters. 5, 2, p. 3477-3484 8 p., 9019843.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Detection of solidification cracking of Al-7mass%Si alloy by using acoustic emission and visualization methods

Endo, I., Chiba, H., Ueki, T., Toriyama, T. & Yoshida, M., 2010 Dec 1, In : Keikinzoku/Journal of Japan Institute of Light Metals. 60, 10, p. 486-491 6 p.

Research output: Contribution to journalArticle

Deterioration of stone materials in the Angkor monuments, Cambodia

Uchida, E., Ogawa, Y., Maeda, N. & Nakagawa, T., 2000 Jan 1, In : Engineering Geology. 55, 1-2, p. 101-112 12 p.

Research output: Contribution to journalArticle

61 Citations (Scopus)

Deterioration of stone materials in the Angkor Monuments, Cambodia

Uchida, E., Ogawa, Y., Maeda, N. & Nakagawa, T., 2000 Dec 1, In : Developments in Geotechnical Engineering. 84, C, p. 329-340 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Determination of Optimum Criteria for Condition-based Maintenance of Automatic Ticket Gates Using Remote Monitoring Data

Sato, Y., Morimoto, A. & Takata, S., 2017, In : Procedia CIRP. 59, p. 190-195 6 p.

Research output: Contribution to journalArticle

Determination of polycyclic aromatic hydrocarbons in atmospheric water using stir bar sorptive extraction and HPLC with fluorescence detection

Fujita, M., Okochi, H., Ogata, H., Nagoya, T. & Minami, Y., 2013, In : Bunseki Kagaku. 62, 12, p. 1111-1116 6 p.

Research output: Contribution to journalArticle

Determination of the gain for a walking speed amplifying belt using brain activity

Miura, S., Yokoo, Y., Nakashima, Y., Ogaya, Y., Nihei, M., Ando, T., Kobayashi, Y. & Fujie, M. G., 2020 Apr, In : IEEE Transactions on Human-Machine Systems. 50, 2, p. 154-164 11 p., 8961127.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Determining the construction sequence of the Preah Vihear monument in Cambodia from its sandstone block characteristics

Uchida, E., Mizoguchi, A., Sato, H., Shimoda, I. & Watanabe, R., 2017 Oct 10, In : Heritage Science. 5, 1, 42.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Deterministic modeling of unconfined turbulent diffusion flames

Tokunaga, T. & Hasemi, Y., 1986 Nov, In : Journal of Heat Transfer. 108, 4, p. 882-888 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
20 Citations (Scopus)

Developing computational infrastructure for the CorCenCC corpus: The National Corpus of Contemporary Welsh

Knight, D., Loizides, F., Neale, S., Anthony, L. & Spasić, I., 2020, (Accepted/In press) In : Language Resources and Evaluation.

Research output: Contribution to journalArticle

Open Access

Development and analysis of DECC (data-base for energy consumption of commercial building): Part 1 Development on basic database of DECC

Takaguchi, H., Izutsu, S., Washiya, S., Kametani, S., Hanzawa, H., Yoshino, H., Asano, Y., Okumiya, M., Shimoda, Y., Murakawa, S., Yoda, H., Sakamoto, Y., Bogaki, K. & Murakami, S., 2012 Aug, In : Journal of Environmental Engineering (Japan). 77, 678, p. 699-705 7 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Development and application of a multi-objective optimization tool for renewable energy mix in municipalities

Hori, K., Matsui, T., Ono, S., Fukui, K. I., Hasuike, T. & Machimura, T., 2018, In : Transactions of the Japanese Society for Artificial Intelligence. 33, 3, F-SGAI01_1-11.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Development and application of the renewable energy regional optimization utility tool for environmental sustainability: REROUTES

Hori, K., Matsui, T., Hasuike, T., Fukui, K. I. & Machimura, T., 2016 Aug 1, In : Renewable Energy. 93, p. 548-561 14 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Development and evaluation of a registration methodology for information-guided precision robotic laser neurosurgery system

Nakamura, R., Hara, M., Omori, S., Uematsu, M., Umezu, M., Muragaki, Y. & Iseki, H., 2010, In : IEEJ Transactions on Electronics, Information and Systems. 130, 3, p. 414-419+8

Research output: Contribution to journalArticle

Development and experimental evaluation of oral rehabilitation robot that provides maxillofacial massage to patients with oral disorders

Ishii, H., Koga, H., Obokawa, Y., Solis, J., Takanishi, A. & Katsumata, A., 2009 Sep 1, In : International Journal of Robotics Research. 28, 9, p. 1228-1239 12 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Development and Stability Analysis of an Imitation Learning-Based Pose Planning Approach for Multi-Section Continuum Robot

Seleem, I. A., El-Hussieny, H., Assal, S. F. M. & Ishii, H., 2020, In : IEEE Access. 8, p. 99366-99379 14 p., 9099824.

Research output: Contribution to journalArticle

Open Access

Development and testing of an endoscopic pseudo-viewpoint alternating system

Koreeda, Y., Obata, S., Nishio, Y., Miura, S., Kobayashi, Y., Kawamura, K., Souzaki, R., Ieiri, S., Hashizume, M. & Fujie, M. G., 2015 May 1, In : International Journal of Computer Assisted Radiology and Surgery. 10, 5, p. 619-628 10 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Development in manufacturing of carbon fiber reinforced aluminum preform wires using ultrasonic infiltration method

Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K., Amanuma, S., Jin, P. & Yoshida, M., 2006 Jan 1, In : Keikinzoku/Journal of Japan Institute of Light Metals. 56, 1, p. 28-33 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Development of a bipedal humanoid robot presupposing various whole body motions

Yamaguchi, JI. I., Soga, E., Set, S. A., Aoyagi, D., Nagamatsu, A. & Takanishi, A., 1998 Jan 1, In : Advanced Robotics. 13, 3, p. 297-299 3 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Development of a circulatory model to predict the change in the hemodynamics between with and without pumping of a left ventricular assist device (LVAD)

Uchiyama, M., Umezu, M., Noda, H., Takano, H. & Tsuchiya, K., 1988 Jan 1, In : Japanese Journal of Artificial Organs. 17, 6, p. 1696-1705 10 p.

Research output: Contribution to journalArticle

Development of a colon endoscope robot that adjusts its locomotion through the use of reinforcement learning

Trovato, G., Shikanai, M., Ukawa, G., Kinoshita, J., Murai, N., Lee, J. W., Ishii, H., Takanishi, A., Tanoue, K., Ieiri, S., Konishi, K. & Hashizume, M., 2010 Jul, In : International Journal of Computer Assisted Radiology and Surgery. 5, 4, p. 317-325 9 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Development of a device for dynamical measurement of the load on casting and the contraction of the casting in a sand mold during cooling

Motoyama, Y., Takahashi, H., Inoue, Y., Shinji, K. & Yoshida, M., 2012 Jun 1, In : Journal of Materials Processing Technology. 212, 6, p. 1399-1405 7 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Development of a high-efficiency H2 feeder for bioremediation

Nobata, T., Prosnansky, M., Sakakibara, Y. & Fukuda, S., 2005, In : Water Science and Technology. 52, 9, p. 259-264 6 p.

Research output: Contribution to journalArticle

Development of a high-precision viscous chocolate printer utilizing electrostatic inkjet printing

Suzuki, Y., Takagishi, K. & Umezu, S., 2019 Feb 1, In : Journal of Food Process Engineering. 42, 1, e12934.

Research output: Contribution to journalArticle

2 Citations (Scopus)
Open Access

Development of a Humorous Humanoid Robot Capable of Quick-and-Wide Arm Motion

Kishi, T., Shimomura, S., Futaki, H., Yanagino, H., Yahara, M., Cosentino, S., Nozawa, T., Hashimoto, K. & Takanishi, A., 2016 Jul 1, In : IEEE Robotics and Automation Letters. 1, 2, p. 1081-1088 8 p., 7409982.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Development of a hybrid wheel-legged mobile robot WR-3 designed for the behavior analysis of rats

Shi, Q., Ishii, H., Miyagishima, S., Konno, S., Fumino, S., Takanishi, A., Okabayashi, S., Iida, N. & Kimura, H., 2011 Nov 25, In : Advanced Robotics. 25, 18, p. 2255-2272 18 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Development of a hydraulic-driven flexible manipulator for neurosurgery

Okayasu, H., Okamoto, J., Fujie, M. G., Umezu, M. & Iseki, H., 2003 Jun 1, In : International Congress Series. 1256, C, p. 607-612 6 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
3 Citations (Scopus)
24 Citations (Scopus)

Development of a mechanical circulatory model during diastolic phase for the evaluation of the prosthetic valve function

Naemura, K., Izumi, K., Fujimoto, T., Umezu, M., Katumata, Y., Kitamura, M., Koyanagi, H. & Dohi, T., 1995, In : Japanese Journal of Artificial Organs. 24, 2, p. 448-452 5 p.

Research output: Contribution to journalArticle

Development of an analytical method for the detection of NOz and its application to the atmospheric analysis at a mountain site

Wada, R., Sadanaga, Y., Kato, S., Katsumi, N., Okochi, H., Iwamoto, Y., Miura, K., Kobayashi, H., Kamogawa, M., Matsumoto, J., Yonemura, S., Matsumi, Y., Kajino, M. & Hatakeyama, S., 2018 Jan 1, In : Bunseki Kagaku. 67, 6, p. 333-340 8 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2 Citations (Scopus)