Undergraduate

  • Japan

Research Output

Filter
Paper
2019

Development support of user interfaces adaptive to use environment

Tanaka, S., Iwata, H., Shirogane, J. & Fukazawa, Y., 2019 Jan 1, p. 223-228. 6 p.

Research output: Contribution to conferencePaper

Internal flow and stability of balance piston for a rocket pump

Kimura, N., Yoshii, Y., Uchiyama, K. & Miyagawa, K., 2019 Jan 1.

Research output: Contribution to conferencePaper

Life-cycle performance assessment of road network under multiple hazards

Ishibashi, H., Nanami, K., Kojima, T., Kawai, Y., Akiyama, M. & Frangopol, D. M., 2019 Jan 1.

Research output: Contribution to conferencePaper

Modeling spatial variability of steel corrosion using Gumbel distribution

Zhang, M., Lim, S., Akiyama, M. & Frangopol, D. M., 2019 Jan 1.

Research output: Contribution to conferencePaper

Real-time botnet detection using nonnegative tucker decomposition

Kanehara, H., Takahashi, T., Murakami, Y., Inoue, D., Shimamura, J. & Murata, N., 2019 Jan 1, p. 1337-1344. 8 p.

Research output: Contribution to conferencePaper

Reliability-based durability design of shield tunnels in coastal regions

He, Z., Akiyama, M. & Frangopol, D. M., 2019 Jan 1.

Research output: Contribution to conferencePaper

Time-dependent structural performance analysis of RC slab exposed to chloride attack by incorporating spatial variability

Srivaranun, S., Masuda, K., Akiyama, M. & Frangopol, D. M., 2019 Jan 1.

Research output: Contribution to conferencePaper

Unsteady behavior of a radial fan in a pulsating flow field

Shiratori, S., Nakamura, Y., Yasui, K., Yamada, S. & Miyagawa, K., 2019 Jan 1.

Research output: Contribution to conferencePaper

2018

Consolidation property of a highly compressible construction waste sludge

Ibaraki, M., Sasahara, T., Sugawara, Y. & Akaki, H., 2018 Jan 1.

Research output: Contribution to conferencePaper

Display system for distribution of virtual image sources by using mixed reality technology

Teraoka, W., Kataoka, Y., Oikawa, Y. & Ikeda, Y., 2018 Jan 1.

Research output: Contribution to conferencePaper

Evaluation of control method of VRF (variable refrigerant flow) system by experimental study and simulation analysis

Matsumoto, K., Ohno, K., Yamaguchi, S. & Saito, K., 2018 Jan 1.

Research output: Contribution to conferencePaper

Experimental study of delaying effect of the frost formation on cryogenic heat exchanger tube surfaces using super-hydrophobicity tube by anodic oxidation method

Tokawa, S., Kinoshita, Y., Kurata, T., Osumi, R. & Satou, T., 2018 Jan 1.

Research output: Contribution to conferencePaper

Experiments for the improvement of fire performance of single-sided external soil walls of historic town houses

Adachi, E., Kikuchi, D., Hasemi, Y., Yasui, N., Kimura, T. & Kaku, C., 2018 Jan 1.

Research output: Contribution to conferencePaper

Integrated energy management system assuming exhaust heat utilization to supercooling by PCM in supermarket

Watanabe, T., Nakamura, T., Bae, S. & Katsuta, M., 2018 Jan 1.

Research output: Contribution to conferencePaper

Measurement of sound pressure inside tube using optical interferometry

Hermawanto, D., Ishikawa, K., Yatabe, K. & Oikawa, Y., 2018 Jan 1.

Research output: Contribution to conferencePaper

Optical visualization of sound field inside transparent cavity using polarization high-speed camera

Ishikawa, K., Yatabe, K., Oikawa, Y., Onuma, T. & Niwa, H., 2018 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Optical visualization of sound source of edge tone using parallel phase-shifting interferometry

Tanigawa, R., Ishikawa, K., Yatabe, K., Oikawa, Y., Onuma, T. & Niwa, H., 2018 Jan 1.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Phenomenological investigation of operando lithium-ion battery for automotive application

Suga, S., Takaichi, S., Kurihara, J., Nakagaki, T., Hirai, S. & Tabuchi, Y., 2018 Jan 1.

Research output: Contribution to conferencePaper

Seismic effect on the fire performance of wooden walls designed for low rise buildings

Hasemi, Y., 2018 Jan 1.

Research output: Contribution to conferencePaper

Study of High-speed SRM with Amorphous steel sheet for EV

Tomioka, T., Aiso, K. & Akatsu, K., 2018 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
2017

[PE1-019] Effect of FeOx on the liquidus line of the Al2O3-CaO-SiO2-Cr2O 3 system at 1573K

Fujiwara, D., Sekimoto, H. & Yamaguchi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

[PE1-019] Effect of FeO x on the liquidus line of the Al 2 O 3 -CaO-SiO 2 -Cr 2 O 3 system at 1573K

Fujiwara, D., Sekimoto, H. & Yamaguchi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

A flipped classroom experience: The lateral instability phenomenon

Sgambi, L., Nowicki, A., Basso, N. & Garavaglia, E., 2017 Jan 1, p. 288-295. 8 p.

Research output: Contribution to conferencePaper

Application of CFD analysis for static and dynamic characteristics of hydrodynamic journal bearing

Takenaka, K., Hayashi, T. & Miyagawa, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

Corporate misconduct in Japan: a conflict of corporate governance logics

Aoki, H., Weichieh, S. U., Yamanoi, J. & Tsang, E. W. K., 2017 Jan 1.

Research output: Contribution to conferencePaper

Creation of amorphous ettringite using low temperature dehydration and influence of dehydration temperature on the boron removal amount

Hobo, S., Granata, G., Tokoro, C., Tanaka, Y. & Nakamura, T., 2017 Jan 1.

Research output: Contribution to conferencePaper

Design of an ejector-absorption heat pump based on entropy generation minimization

Hattori, H., Matsumoto, H. & Amano, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Distribution ratios of palladium between the Cu2O-SiO2 slag and a liquid copper at 1523K

Endo, Y., Sekimoto, H. & Yamaguchi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

Distribution ratios of palladium between the Cu 2 O-SiO 2 slag and a liquid copper at 1523K

Endo, Y., Sekimoto, H. & Yamaguchi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

Geochemical modeling considering oxidation rate of manganese and surface complexation to manganese precipitate for treatment of acid mine drainage

Yagisawa, M., Kato, T., Granata, G., Tokoro, C., Sakakibara, T. & Hayashi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

Geo-fluid analysis for the natural purification mechanism of Arsenic and Iron in Yotsugi mill tailings pond

Kawasaki, Y., Yagisawa, M., Fukuda, H., Granata, G., Tokoro, C. & Ohara, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

Impact on energy saving under energy interchanges among buildings concerning demand profiles

Ikegami, H., Yoshida, A. & Amano, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

Influence of hydrophilic and hydrophobic coating on hydrofoil performance

Onishi, K., Matsuda, K. & Miyagawa, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Lessons learned from evaluation of frac-pack flow performance before and after full clean-up for subsea wells in high-permeability gas reservoirs

Nozaki, M., Burton, R. C., Pandey, V. J. & Furui, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

Lessons learned from evaluation of frac-pack flow performance before and after full clean-up for subsea wells in high-permeability gas reservoirs

Nozaki, M., Burton, R. C., Pandey, V. J. & Furui, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Needs for the decommissioning geotechnical engineering for Fukushima daiichi nuclear power plant

Goto, S., Komine, H., Saito, Y., Yoshikawa, E., Suzuki, M. & Watanabe, Y., 2017 Jan 1, p. 3119-3122. 4 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Noise mapping system with acoustical measurement blimp robot

Saitou, R., Ikeda, Y. & Oikawa, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

On smoother based on Laplacian method for uneven surface derived from 3-D topology optimization of electrical machinery in magnetic field system

Kanda, Y., Okamoto, Y., Masuda, H. & Wakao, S., 2017 Jan 1, p. 214-215. 2 p.

Research output: Contribution to conferencePaper