• 843 Citations
  • 18 h-Index
1981 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
Conference contribution

A method for evaluating an interfacial fracture in polymer-matrix composites

Kimura, S., Koyanagi, J., Hama, T. & Kawada, H., 2007 Nov 19, Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007. p. 376-377 2 p. (Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A method for predicting the stress distribution in ductile matrix composite under cyclic loading

Kimura, S., Koyanagi, J., Hama, T. & Kawada, H., 2007, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An effect of physical aging progression on viscoelastic property in carbon/epoxy composites

Okudoi, Y., Arao, Y., Koyanagi, J., Takeda, S. I. & Kawada, H., 2010 Jan 1, 7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010. ACCM-7 Organizing Committee, p. 194-197 4 p. (7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An elasto-plastic shear-lag model for single fiber composite

Kimura, S., Koyanagi, J. & Kawada, H., 2006 Jan 1, Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture. Gdoutos, E. E. (ed.). Kluwer Academic Publishers, p. 339-340 2 p. (Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An improved shear-lag analysis for evaluating interfacial mechanical property

Kimura, S., Koyanagi, J., Hama, T. & Kawada, H., 2007 Nov 19, Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007. p. 1499-1504 6 p. (Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damage accumulation and lifetime prediction of woven GFRP under constant tensile load test in hydrochloric acid solution

Kotani, M., Yamamoto, Y., Sato, Y., Sato, R. & Kawada, H., 2011, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damage evolution of delayed fracture in woven GFRP under hot water environment

Kotani, M., Nakamichi, K., Yasufuku, Y. & Kawada, H., 2009 Dec 1, Multi-Functional Materials and Structures II. p. 1923-1926 4 p. (Advanced Materials Research; vol. 79-82).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damage mechanics characterization of high-cycle fatigue in quasi-isotropic CFRP laminates

Hosoi, A., Karasawa, H. & Kawada, H., 2005 Dec 1, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. p. 1729-1736 8 p. (Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damage mechanisms and mechanical properties of directly bonded CFRTP and aluminium with nano-structured surface

Jespersen, K. M., Abe, H., Ota, H., Saito, K., Wada, K., Hosoi, A. & Kawada, H., 2020 Jan 1, ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing - Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, 2019. Komorowski, J. & Niepokolczycki, A. (eds.). Springer, p. 104-112 9 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Delayed fracture of woven GFRP laminates in hostile environment

Kotani, M., Yajima, M. & Kawada, H., 2012 Jan 1, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of space telescope mirror made by light and thermally stable CFRP

Koyanagi, J., Arao, Y., Terada, H., Utsunomiya, S., Takeda, S. I. & Kawada, H., 2010 Dec 1, Fourth International Conference on Experimental Mechanics. 75223L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7522).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of untwisted carbon nanotube yarn with high strength by heat treatment

Kim, T., Nikawa, H., Hosoi, A. & Kawada, H., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dimensional stability of CFRP in humidity environment

Arao, Y., Koyanagi, J., Hiroshi, H., Kawada, H. & Aoki, Y., 2007 Nov 19, Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007. p. 365-371 7 p. (Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of moisture absorption on dimensional stability in carbon/epoxy composites

Arao, Y., Koyanagi, J., Hatta, H., Aoki, Y. & Kawada, H., 2007, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Enhancing mechanical properties of graphene / epoxy nanocomposites using few-layer graphene produced by liquid phase exfoliation

Oba, K., Arao, Y., Hosoi, A. & Kawada, H., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of GFRP strength underwater environment considering interfacial strength degradation

Kotani, M., Shibata, Y. & Kawada, H., 2009, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of interfacial debonding process in single fibre composite using elasto-plastic shear-lag and FEM analyses

Kimura, S., Koyanagi, J., Hama, T. & Kawada, H., 2008 Dec 1, Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008. p. 119-122 4 p. (Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of transverse crack initiation in cross-ply CFRP laminates under high-cycle fatigue loading

Takamura, K., Hosoi, A., Sato, N. & Kawada, H., 2010 Jan 1, 7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010. ACCM-7 Organizing Committee, p. 273-276 4 p. (7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental characterization of dynamic tensile strength in off-axis carbon/epoxy composites

Taniguchi, N., Nishiwaki, T. & Kawada, H., 2007, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of CNTs grafted hierarchical multiscale composite and evaluation of its mechanical properties

Kim, T., Kameya, M., Natori, J. & Kawada, H., 2014 Jan 1, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM, (16th European Conference on Composite Materials, ECCM 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue life prediction of thick CFRP laminates with toughnened interlaminar layers in the out-of-plane direction at different stress ratio

Hosoi, A., Tsuge, S., Seki, S., Fujita, Y., Taketa, I. & Kawada, H., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geometrical stability of CFRP laminate considering ply angle misalignment

Arao, Y., Koyanagi, J., Takeda, S., Utsunomiya, S. & Kawada, H., 2011, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influences of plasticity-induced crack closure on fatigue crack healing of carbon steel with heat treatment

Hamada, E., Furuya, Y., Hosoi, A., Morita, Y. & Kawada, H., 2018 Jan 1, Materials: Genetics to Structures. American Society of Mechanical Engineers (ASME), Vol. 12.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interaction between transverse cracks and edge delamination considering free-edge effects in composite laminates

Hosoi, A., Yagi, S., Nagata, K. & Kawada, H., 2007, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Long-term creep rupture prediction in unidirectional composites

Koyanagi, J., Ogawa, F. & Kawada, H., 2006 Jan 1, Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture. Gdoutos, E. E. (ed.). Kluwer Academic Publishers, p. 473-474 2 p. (Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Mechanical properties of densified untwisted carbon nanotube yarn / epoxy composites

Yoshizaki, R., Sung, K. T., Hosoi, A. & Kawada, H., 2015, ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modification of the interface in carbon nanotube-grafted t-glass fiber

Kawada, H., Sato, S. & Kameya, M., 2012 Dec 1, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. p. 1437-1445 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Monitoring of internal residual strain changes in CFRP using FBG sensors

Takeda, S. I., Koyanagi, J., Utsunomiya, S., Kinoshita, Y., Arao, Y. & Kawada, H., 2010 Dec 1, Fourth International Conference on Experimental Mechanics. 75223N. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7522).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Off-axis properties of woven GFRP under constant tensile load in hydrothermal environment

Kotani, M., Hattori, S., Natori, J. & Kawada, H., 2012 Jan 1, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Prediction of creep rupture in unidirectional composites

Koyanagi, J., Ogawa, F. & Kawada, H., 2005 Dec 1, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. p. 1857-1863 7 p. (Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Prediction of first transverse crack formation in cross-ply CFRP laminates under fatigue loading

Hosoi, A., Kurihara, K., Sato, N. & Kawada, H., 2012 Dec 1, 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. p. 173-178 6 p. (8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Quantitative evaluation of curing shrinkage in polymeric matrix composites

Kotani, M., Arao, Y., Koyanagi, J., Kawada, H., Hatta, H. & Ishida, Y., 2007, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on strength degradation in unidirectional composites, due to time-dependent damage accumulation

Ogawa, F., Koyanagi, J. & Kawada, H., 2007 Dec 1, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". (ICCM International Conferences on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The strength degradation mechanism of single fiber composite under water environment-prediction method of residual fiber strength using crack propagation model

Kotani, M. & Kawada, H., 2008 Dec 1, Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008. p. 135-138 4 p. (Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Time-dependent deformation of surface geometry on light weight and thermally stable CFRP mirror in humid environment

Arao, Y., Koyanagi, J., Utsunomiya, S., Takeda, S. I. & Kawada, H., 2010 Sep 23, Modern Technologies in Space- and Ground-Based Telescopes and Instrumentation. 77392N. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7739).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Time-dependent Out-of-plane deformation of symmetric laminate including small fiber misaligned

Arao, Y., Koyanagi, J., Terada, H. & Kawada, H., 2008 Dec 1, Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008. p. 297-299 3 p. (Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Very high-cycle fatigue characteristics of cross-ply CFRP laminates in transverse crack initiation

Hosoi, A., Suzuki, T., Kosugi, K., Atsumi, T., Shimamura, Y., Tsuda, T. & Kawada, H., 2020, ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing - Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, 2019. Komorowski, J. & Niepokolczycki, A. (eds.). Springer, p. 838-846 9 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

X-ray tomography based finite element modelling of non-crIMP fabric based fibre composite

Jespersen, K. M., Asp, L. E., Hosoi, A., Kawada, H. & Mikkelsen, L. P., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution