• 5808 Citations
  • 49 h-Index
20012020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

ALE and Space–Time Variational Multiscale Isogeometric Analysis of Wind Turbines and Turbomachinery

Bazilevs, Y., Takizawa, K., Tezduyar, T. E., Hsu, M. C., Otoguro, Y., Mochizuki, H. & Wu, M. C. H., 2020, Modeling and Simulation in Science, Engineering and Technology. Birkhauser, p. 195-233 39 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state

Takizawa, K., Tezduyar, T. E. & Avsar, R., 2020 Jun 1, In : Computational Mechanics. 65, 6, p. 1567-1591 25 p.

Research output: Contribution to journalArticle

Open Access
10 Citations (Scopus)

Computational analysis of particle-laden-airflow erosion and experimental verification

Castorrini, A., Venturini, P., Corsini, A., Rispoli, F., Takizawa, K. & Tezduyar, T. E., 2020 Jun 1, In : Computational Mechanics. 65, 6, p. 1549-1565 17 p.

Research output: Contribution to journalArticle

Open Access

Computational Cardiovascular Analysis with the Variational Multiscale Methods and Isogeometric Discretization

Hughes, T. J. R., Takizawa, K., Bazilevs, Y., Tezduyar, T. E. & Hsu, M. C., 2020, Modeling and Simulation in Science, Engineering and Technology. Birkhauser, p. 151-193 43 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access

Element length calculation in B-spline meshes for complex geometries

Otoguro, Y., Takizawa, K. & Tezduyar, T. E., 2020 Apr 1, In : Computational Mechanics. 65, 4, p. 1085-1103 19 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Heart valve isogeometric sequentially-coupled FSI analysis with the space–time topology change method

Terahara, T., Takizawa, K., Tezduyar, T. E., Bazilevs, Y. & Hsu, M. C., 2020 Apr 1, In : Computational Mechanics. 65, 4, p. 1167-1187 21 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Variational Multiscale Flow Analysis in Aerospace, Energy and Transportation Technologies

Takizawa, K., Bazilevs, Y., Tezduyar, T. E. & Korobenko, A., 2020, Modeling and Simulation in Science, Engineering and Technology. Birkhauser, p. 235-280 46 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

Ventricle-valve-aorta flow analysis with the Space–Time Isogeometric Discretization and Topology Change

Terahara, T., Takizawa, K., Tezduyar, T. E., Tsushima, A. & Shiozaki, K., 2020 May 1, In : Computational Mechanics. 65, 5, p. 1343-1363 21 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)
2019
Open Access
6 Citations (Scopus)

Aorta zero-stress state modeling with T-spline discretization

Sasaki, T., Takizawa, K. & Tezduyar, T. E., 2019 Jun 15, In : Computational Mechanics. 63, 6, p. 1315-1331 17 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

A stabilized ALE method for computational fluid-structure interaction analysis of passive morphing in turbomachinery

Castorrini, A., Corsini, A., Rispoli, F., Takizawa, K. & Tezduyar, T. E., 2019 Jan 1, In : Mathematical Models and Methods in Applied Sciences. 29, 5, p. 967-994 28 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization

Kanai, T., Takizawa, K., Tezduyar, T. E., Tanaka, T. & Hartmann, A., 2019 Feb 15, In : Computational Mechanics. 63, 2, p. 301-321 21 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)
8 Citations (Scopus)

Computational analysis of flow-driven string dynamics in a pump and residence time calculation

Komiya, K., Kanai, T., Otoguro, Y., Kaneko, M., Hirota, K., Zhang, Y., Takizawa, K., Tezduyar, T. E., Nohmi, M., Tsuneda, T., Kawai, M. & Isono, M., 2019 Mar 28, In : IOP Conference Series: Earth and Environmental Science. 240, 6, 062014.

Research output: Contribution to journalConference article

Open Access
11 Citations (Scopus)

Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion

Castorrini, A., Corsini, A., Rispoli, F., Venturini, P., Takizawa, K. & Tezduyar, T. E., 2019 Jan 1, In : Computational Mechanics.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Isogeometric hyperelastic shell analysis with out-of-plane deformation mapping

Takizawa, K., Tezduyar, T. E. & Sasaki, T., 2019 Apr 15, In : Computational Mechanics. 63, 4, p. 681-700 20 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Medical-image-based aorta modeling with zero-stress-state estimation

Sasaki, T., Takizawa, K. & Tezduyar, T. E., 2019 Jan 1, In : Computational Mechanics.

Research output: Contribution to journalArticle

Open Access
9 Citations (Scopus)

Methods for computation of flow-driven string dynamics in a pump and residence time

Kanai, T., Takizawa, K., Tezduyar, T. E., Komiya, K., Kaneko, M., Hirota, K., Nohmi, M., Tsuneda, T., Kawai, M. & Isono, M., 2019 Jan 1, In : Mathematical Models and Methods in Applied Sciences.

Research output: Contribution to journalArticle

16 Citations (Scopus)
Open Access
9 Citations (Scopus)
12 Citations (Scopus)
Open Access
9 Citations (Scopus)

Tire aerodynamics with actual tire geometry, road contact and tire deformation

Kuraishi, T., Takizawa, K. & Tezduyar, T. E., 2019 Jun 15, In : Computational Mechanics. 63, 6, p. 1165-1185 21 p.

Research output: Contribution to journalArticle

Open Access
20 Citations (Scopus)
2018

A general-purpose NURBS mesh generation method for complex geometries

Otoguro, Y., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 399-434 36 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

20 Citations (Scopus)

Aorta flow analysis and heart valve flow and structure analysis

Takizawa, K., Tezduyar, T. E., Uchikawa, H., Terahara, T., Sasaki, T., Shiozaki, K., Yoshida, A., Komiya, K. & Inoue, G., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 29-89 61 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

20 Citations (Scopus)

Computer Modeling of Wind Turbines: 1. ALE-VMS and ST-VMS Aerodynamic and FSI Analysis

Korobenko, A., Bazilevs, Y., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, (Accepted/In press) In : Archives of Computational Methods in Engineering.

Research output: Contribution to journalArticle

18 Citations (Scopus)

Estimation of element-based zero-stress state in arterial FSI computations with isogeometric wall discretization

Takizawa, K., Tezduyar, T. E. & Sasaki, T., 2018, Lecture Notes in Applied and Computational Mechanics. Springer Verlag, Vol. 84. p. 101-122 22 p. (Lecture Notes in Applied and Computational Mechanics; vol. 84).

Research output: Chapter in Book/Report/Conference proceedingChapter

11 Citations (Scopus)

Heart valve flow computation with the space-time slip interface topology change (ST-SI-TC) method and isogeometric analysis (IGA)

Takizawa, K., Tezduyar, T. E., Terahara, T. & Sasaki, T., 2018, Lecture Notes in Applied and Computational Mechanics. Springer Verlag, Vol. 84. p. 77-99 23 p. (Lecture Notes in Applied and Computational Mechanics; vol. 84).

Research output: Chapter in Book/Report/Conference proceedingChapter

25 Citations (Scopus)

Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization

Takizawa, K., Tezduyar, T. E., Uchikawa, H., Terahara, T., Sasaki, T. & Yoshida, A., 2018 Jan 1, (Accepted/In press) In : Computers and Fluids.

Research output: Contribution to journalArticle

23 Citations (Scopus)

Recent advances in ALE-VMS and ST-VMS computational aerodynamic and FSI analysis of wind turbines

Korobenko, A., Bazilevs, Y., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 253-336 84 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

18 Citations (Scopus)

Space–Time computational analysis of tire aerodynamics with actual geometry, road contact, and tire deformation

Kuraishi, T., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 337-376 40 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

16 Citations (Scopus)
17 Citations (Scopus)
25 Citations (Scopus)

Turbocharger turbine and exhaust manifold flow computation with the Space–Time Variational Multiscale Method and Isogeometric Analysis

Otoguro, Y., Takizawa, K., Tezduyar, T. E., Nagaoka, K. & Mei, S., 2018 Jan 1, (Accepted/In press) In : Computers and Fluids.

Research output: Contribution to journalArticle

26 Citations (Scopus)
2017

Finite elements in flow problems 2015, Taiwan

Lin, C. A., Bazilevs, Y., Brummelen, E. H., Chen, C. Y. & Takizawa, K., 2017 Jan 5, In : Computers and Fluids. 142, p. 1-2 2 p.

Research output: Contribution to journalEditorial

48 Citations (Scopus)
32 Citations (Scopus)
42 Citations (Scopus)

Turbocharger flow computations with the Space–Time Isogeometric Analysis (ST-IGA)

Takizawa, K., Tezduyar, T. E., Otoguro, Y., Terahara, T., Kuraishi, T. & Hattori, H., 2017 Jan 5, In : Computers and Fluids. 142, p. 15-20 6 p.

Research output: Contribution to journalArticle

54 Citations (Scopus)
2016

A geometrical-characteristics study in patient-specific FSI analysis of blood flow in the thoracic aorta

Suito, H., Takizawa, K., Huynh, V. Q. H., Sze, D., Ueda, T. & Tezduyar, T. E., 2016, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 379-386 8 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

22 Citations (Scopus)

Aorta modeling with the element-based zero-stress state and isogeometric discretization

Takizawa, K., Tezduyar, T. E. & Sasaki, T., 2016 Nov 5, (Accepted/In press) In : Computational Mechanics. p. 1-16 16 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Computational analysis of wind-turbine blade rain erosion

Castorrini, A., Corsini, A., Rispoli, F., Venturini, P., Takizawa, K. & Tezduyar, T. E., 2016 Dec 15, In : Computers and Fluids. 141, p. 175-183 9 p.

Research output: Contribution to journalArticle

38 Citations (Scopus)

Computational Fluid–Structure Interaction and Flow Simulation

Bazilevs, Y. & Takizawa, K., 2016 Dec 15, In : Computers and Fluids. 141, p. 1 1 p.

Research output: Contribution to journalEditorial

1 Citation (Scopus)

Computational thermo-fluid analysis of a disk brake

Takizawa, K., Tezduyar, T. E., Kuraishi, T., Tabata, S. & Takagi, H., 2016 Feb 15, (Accepted/In press) In : Computational Mechanics. p. 1-13 13 p.

Research output: Contribution to journalArticle

50 Citations (Scopus)

Finite elements in flow problems 2015

Lin, C. A., Bazilevs, Y., van Brummelen, H., Takizawa, K. & Wu, J. S., 2016 Oct 1, In : Computers and Mathematics with Applications. 72, 8, p. 1957-1958 2 p.

Research output: Contribution to journalEditorial

21 Citations (Scopus)

Preface

Bazilevs, Y. & Takizawa, K., 2016, In : Modeling and Simulation in Science, Engineering and Technology. p. vii

Research output: Contribution to journalEditorial

44 Citations (Scopus)

Space–Time method for flow computations with slip interfaces and topology changes (ST-SI-TC)

Takizawa, K., Tezduyar, T. E., Asada, S. & Kuraishi, T., 2016 Dec 15, In : Computers and Fluids. 141, p. 124-134 11 p.

Research output: Contribution to journalArticle

43 Citations (Scopus)