• 5508 Citations
  • 47 h-Index
20012019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2016

Ram-air parachute structural and fluid mechanics computations with the Space-Time Isogeometric Analysis (ST-IGA)

Takizawa, K., Tezduyar, T. E. & Terahara, T., 2016 May 3, (Accepted/In press) In : Computers and Fluids.

Research output: Contribution to journalArticle

39 Citations (Scopus)

Space–Time method for flow computations with slip interfaces and topology changes (ST-SI-TC)

Takizawa, K., Tezduyar, T. E., Asada, S. & Kuraishi, T., 2016 Dec 15, In : Computers and Fluids. 141, p. 124-134 11 p.

Research output: Contribution to journalArticle

40 Citations (Scopus)

SUPG/PSPG computational analysis of rain erosion in wind-turbine blades

Castorrini, A., Corsini, A., Rispoli, F., Venturini, P., Takizawa, K. & Tezduyar, T. E., 2016, In : Modeling and Simulation in Science, Engineering and Technology. p. 77-96 20 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)
2017

Finite elements in flow problems 2015, Taiwan

Lin, C. A., Bazilevs, Y., Brummelen, E. H., Chen, C. Y. & Takizawa, K., 2017 Jan 5, In : Computers and Fluids. 142, p. 1-2 2 p.

Research output: Contribution to journalEditorial

29 Citations (Scopus)
38 Citations (Scopus)
2018

A general-purpose NURBS mesh generation method for complex geometries

Otoguro, Y., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 399-434 36 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

18 Citations (Scopus)

Aorta flow analysis and heart valve flow and structure analysis

Takizawa, K., Tezduyar, T. E., Uchikawa, H., Terahara, T., Sasaki, T., Shiozaki, K., Yoshida, A., Komiya, K. & Inoue, G., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 29-89 61 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

18 Citations (Scopus)

Aorta zero-stress state modeling with T-spline discretization

Sasaki, T., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, (Accepted/In press) In : Computational Mechanics.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization

Kanai, T., Takizawa, K., Tezduyar, T. E., Tanaka, T. & Hartmann, A., 2018 Jul 2, (Accepted/In press) In : Computational Mechanics. p. 1-21 21 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Computer Modeling of Wind Turbines: 1. ALE-VMS and ST-VMS Aerodynamic and FSI Analysis

Korobenko, A., Bazilevs, Y., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, (Accepted/In press) In : Archives of Computational Methods in Engineering.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Estimation of element-based zero-stress state in arterial FSI computations with isogeometric wall discretization

Takizawa, K., Tezduyar, T. E. & Sasaki, T., 2018, Lecture Notes in Applied and Computational Mechanics. Springer Verlag, Vol. 84. p. 101-122 22 p. (Lecture Notes in Applied and Computational Mechanics; vol. 84).

Research output: Chapter in Book/Report/Conference proceedingChapter

10 Citations (Scopus)

Heart valve flow computation with the space-time slip interface topology change (ST-SI-TC) method and isogeometric analysis (IGA)

Takizawa, K., Tezduyar, T. E., Terahara, T. & Sasaki, T., 2018, Lecture Notes in Applied and Computational Mechanics. Springer Verlag, Vol. 84. p. 77-99 23 p. (Lecture Notes in Applied and Computational Mechanics; vol. 84).

Research output: Chapter in Book/Report/Conference proceedingChapter

23 Citations (Scopus)

Isogeometric hyperelastic shell analysis with out-of-plane deformation mapping

Takizawa, K., Tezduyar, T. E. & Sasaki, T., 2018 Jan 1, (Accepted/In press) In : Computational Mechanics.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization

Takizawa, K., Tezduyar, T. E., Uchikawa, H., Terahara, T., Sasaki, T. & Yoshida, A., 2018 Jan 1, (Accepted/In press) In : Computers and Fluids.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Recent advances in ALE-VMS and ST-VMS computational aerodynamic and FSI analysis of wind turbines

Korobenko, A., Bazilevs, Y., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 253-336 84 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

15 Citations (Scopus)

Space–Time computational analysis of tire aerodynamics with actual geometry, road contact, and tire deformation

Kuraishi, T., Takizawa, K. & Tezduyar, T. E., 2018 Jan 1, Modeling and Simulation in Science, Engineering and Technology. Springer Basel, p. 337-376 40 p. (Modeling and Simulation in Science, Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

14 Citations (Scopus)
15 Citations (Scopus)
21 Citations (Scopus)
21 Citations (Scopus)
2019
7 Citations (Scopus)
7 Citations (Scopus)

Computational analysis of flow-driven string dynamics in a pump and residence time calculation

Komiya, K., Kanai, T., Otoguro, Y., Kaneko, M., Hirota, K., Zhang, Y., Takizawa, K., Tezduyar, T. E., Nohmi, M., Tsuneda, T., Kawai, M. & Isono, M., 2019 Mar 28, In : IOP Conference Series: Earth and Environmental Science. 240, 6, 062014.

Research output: Contribution to journalConference article

Open Access
8 Citations (Scopus)

Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion

Castorrini, A., Corsini, A., Rispoli, F., Venturini, P., Takizawa, K. & Tezduyar, T. E., 2019 Jan 1, In : Computational Mechanics.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Medical-image-based aorta modeling with zero-stress-state estimation

Sasaki, T., Takizawa, K. & Tezduyar, T. E., 2019 Jan 1, In : Computational Mechanics.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

Methods for computation of flow-driven string dynamics in a pump and residence time

Kanai, T., Takizawa, K., Tezduyar, T. E., Komiya, K., Kaneko, M., Hirota, K., Nohmi, M., Tsuneda, T., Kawai, M. & Isono, M., 2019 Jan 1, In : Mathematical Models and Methods in Applied Sciences.

Research output: Contribution to journalArticle

12 Citations (Scopus)
Open Access
6 Citations (Scopus)
8 Citations (Scopus)
Open Access
5 Citations (Scopus)

Tire aerodynamics with actual tire geometry, road contact and tire deformation

Kuraishi, T., Takizawa, K. & Tezduyar, T. E., 2019 Jun 15, In : Computational Mechanics. 63, 6, p. 1165-1185 21 p.

Research output: Contribution to journalArticle

Open Access
16 Citations (Scopus)