• 1458 Citations
  • 23 h-Index
1985 …2018

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2018

Approaches to solving China’s marine plastic pollution and CO2 emission problems

Lin, C. & Nakamura, S., 2018 Jul 11, (Accepted/In press) In : Economic Systems Research. p. 1-15 15 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Toward an integrated model of the circular economy: Dynamic waste input–output

Nakamura, S. & Kondo, Y., 2018 Dec 1, In : Resources, Conservation and Recycling. 139, p. 326-332 7 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
2017

Optimal Recycling of Steel Scrap and Alloying Elements: Input-Output based Linear Programming Method with Its Application to End-of-Life Vehicles in Japan

Ohno, H., Matsubae, K., Nakajima, K., Kondo, Y., Nakamura, S., Fukushima, Y. & Nagasaka, T., 2017 Nov 21, In : Environmental Science and Technology. 51, 22, p. 13086-13094 9 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)

Quantifying Recycling and Losses of Cr and Ni in Steel Throughout Multiple Life Cycles Using MaTrace-Alloy

Nakamura, S., Kondo, Y., Nakajima, K., Ohno, H. & Pauliuk, S., 2017 Sep 5, In : Environmental Science and Technology. 51, 17, p. 9469-9476 8 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)
30 Citations (Scopus)
6 Citations (Scopus)
2015

Assessment of soil remediation technologies by comparing health risk reduction and potential impacts using unified index, disability-adjusted life years

Sakaguchi, I., Inoue, Y., Nakamura, S., Kojima, Y., Sasai, R., Sawada, K., Suzuki, K., Takenaka, C. & Katayama, A., 2015 Aug 1, In : Clean Technologies and Environmental Policy. 17, 6, p. 1663-1670 8 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Forecasting Replacement Demand of Durable Goods and the Induced Secondary Material Flows: A Case Study of Automobiles

Kagawa, S., Nakamura, S., Kondo, Y., Matsubae, K. & Nagasaka, T., 2015 Feb 1, In : Journal of Industrial Ecology. 19, 1, p. 10-19 10 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Identification of the driving force of waste generation using a high-resolution waste input-output table

Liao, M. I., Chen, P. C., Ma, H. W. & Nakamura, S., 2015 May 1, In : Journal of Cleaner Production. 94, p. 294-303 10 p.

Research output: Contribution to journalArticle

27 Citations (Scopus)

Toward the efficient recycling of alloying elements from end of life vehicle steel scrap

Ohno, H., Matsubae, K., Nakajima, K., Kondo, Y., Nakamura, S. & Nagasaka, T., 2015 Apr 2, In : Resources, Conservation and Recycling. 100, p. 11-20 10 p.

Research output: Contribution to journalArticle

46 Citations (Scopus)
2014

MaTrace: Tracing the fate of materials over time and across products in open-loop recycling

Nakamura, S., Kondo, Y., Kagawa, S., Matsubae, K., Nakajima, K. & Nagasaka, T., 2014 Jul 1, In : Environmental Science and Technology. 48, 13, p. 7207-7214 8 p.

Research output: Contribution to journalArticle

50 Citations (Scopus)

Thermodynamic analysis for the refining ability of salt flux for aluminum recycling

Hiraki, T., Miki, T., Nakajima, K., Matsubae, K., Nakamura, S. & Nagasaka, T., 2014 Jan 1, In : Materials. 7, 8, p. 5543-5553 11 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Unintentional flow of alloying elements in steel during recycling of end-of-life vehicles

Ohno, H., Matsubae, K., Nakajima, K., Nakamura, S. & Nagasaka, T., 2014 Apr, In : Journal of Industrial Ecology. 18, 2, p. 242-253 12 p.

Research output: Contribution to journalArticle

51 Citations (Scopus)
2013

Development of efficient recycling system for steel alloying elements in end of life vehicles

Ohno, H., Matsubae, K., Nakajima, K., Nakamura, S. & Nagasaka, T., 2013 Jan 1, REWAS 2013: Enabling Materials Resource Sustainability - Held During the TMS 2013 Annual Meeting and Exhibition. Minerals, Metals and Materials Society, p. 414-422 9 p. (TMS Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of Efficient Recycling System for Steel Alloying Elements in End of Life Vehicles

Ohno, H., Matsubae, K., Nakajima, K., Nakamura, S. & Nagasaka, T., 2013 Feb 25, REWAS 2013 Enabling Materials Resource Sustainability. wiley, p. 414-422 9 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

IO-MFA and thermodynamic approach for metal recycling

Nakajima, K., Matsubae, K., Kondo, Y., Nakamura, S. & Nagasaka, T., 2013 Jan 1, REWAS 2013: Enabling Materials Resource Sustainability - Held During the TMS 2013 Annual Meeting and Exhibition. Minerals, Metals and Materials Society, p. 412-413 2 p. (TMS Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

IO-MFA and Thermodynamic Approach for Metal Recycling

Nakajima, K., Matsubae, K., Kondo, Y., Nakamura, S. & Nagasaka, T., 2013 Feb 25, REWAS 2013 Enabling Materials Resource Sustainability. wiley, p. 412-413 2 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Simultaneous material flow analysis of nickel, chromium, and molybdenum used in alloy steel by means of input-output analysis

Nakajima, K., Ohno, H., Kondo, Y., Matsubae, K., Takeda, O., Miki, T., Nakamura, S. & Nagasaka, T., 2013 May 7, In : Environmental Science and Technology. 47, 9, p. 4653-4660 8 p.

Research output: Contribution to journalArticle

44 Citations (Scopus)
2012

Quality- and dilution losses in the recycling of ferrous materials from end-of-life passenger cars: Input-output analysis under explicit consideration of scrap quality

Nakamura, S., Kondo, Y., Matsubae, K., Nakajima, K., Tasaki, T. & Nagasaka, T., 2012 Sep 4, In : Environmental Science and Technology. 46, 17, p. 9266-9273 8 p.

Research output: Contribution to journalArticle

52 Citations (Scopus)
3 Citations (Scopus)

Thermodynamic analysis of separation of alloying elements in recycling of end-of-life titanium products

Lu, X., Hiraki, T., Nakajima, K., Takeda, O., Matsuabe, K., Zhu, H. M., Nakamura, S. & Nagasaka, T., 2012 Mar 22, In : Separation and Purification Technology. 89, p. 135-141 7 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)

Identifying the substance flow of metals embedded in japanese international trade by use of waste input-output material flow analysis (WIO-MFA) model

Nakajima, K., Nansai, K., Matsubae, K., Kondo, Y., Kagawa, S., Inaba, R., Nakamura, S. & Nagasaka, T., 2011 Dec 5, In : ISIJ International. 51, 11, p. 1934-1939 6 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)

Impact of the recovery of secondary ferrous materials from alternative ELV treatment methods on CO2 emission: A waste input output analysis

Matsubae, K., Nakajima, K., Nakamura, S. & Nagasaka, T., 2011 May 20, In : ISIJ International. 51, 1, p. 151-157 7 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Role of motor vehicle lifetime extension in climate change policy

Kagawa, S., Nansai, K., Kondo, Y., Hubacek, K., Suh, S., Minx, J., Kudoh, Y., Tasaki, T. & Nakamura, S., 2011 Feb 15, In : Environmental Science and Technology. 45, 4, p. 1184-1191 8 p.

Research output: Contribution to journalArticle

34 Citations (Scopus)

Synthesis of material flow analysis and input–output analysis

Nakamura, S., 2011 Jan 1, Thermodynamics and the Destruction of Resources. Cambridge University Press, p. 334-362 29 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Thermodynamic criteria for the removal of impurities from end-of-life magnesium alloys by evaporation and flux treatment

Hiraki, T., Takeda, O., Nakajima, K., Matsubae, K., Nakamura, S. & Nagasaka, T., 2011 Jun 1, In : Science and Technology of Advanced Materials. 12, 3, 035003.

Research output: Contribution to journalArticle

23 Citations (Scopus)

UPIOM: A new tool of mfa and its application to the flow of iron and steel associated with car production

Nakamura, S., Kondo, Y., Matsubae, K., Nakajima, K. & Nagasaka, T., 2011 Feb 1, In : Environmental Science and Technology. 45, 3, p. 1114-1120 7 p.

Research output: Contribution to journalArticle

37 Citations (Scopus)
2010
10 Citations (Scopus)

Thermodynamic analysis of contamination by alloying elements in aluminum recycling

Nakajima, K., Takeda, O., Miki, T., Matsubae, K., Nakamura, S. & Nagasaka, T., 2010 Jul 15, In : Environmental Science and Technology. 44, 14, p. 5594-5600 7 p.

Research output: Contribution to journalArticle

75 Citations (Scopus)
2009

Analyzing polyvinyl chloride in Japan with The waste input-output material flow analysis model

Nakamura, S., Nakajima, K., Yoshizawa, Y., Matsubae-Yokoyama, K. & Nagasaka, T., 2009 Oct 1, In : Journal of Industrial Ecology. 13, 5, p. 706-717 12 p.

Research output: Contribution to journalArticle

43 Citations (Scopus)

Rare-metal flow in steel cycle

Matsubae-Yokoyama, K., Nakajima, K., Nakamura, S. & Nagasaka, T., 2009 Dec 1, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 95, 12, p. 759-765 7 p.

Research output: Contribution to journalArticle

2008

Environmental life cycle costing

Rebitzer, G. & Nakamura, S., 2008 Jan 1, Environmental Life Cycle Costing. CRC Press, p. 35-58 24 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

5 Citations (Scopus)

Hybrid input - Output approach to metal production and its application to the introduction of lead-free solders

Nakamura, S., Murakami, S., Nakajima, K. & Nagasaka, T., 2008 May 15, In : Environmental Science and Technology. 42, 10, p. 3843-3848 6 p.

Research output: Contribution to journalArticle

32 Citations (Scopus)

Material flow analysis on steel recycling considering accompanying substances

Yokoyama, K., Nakajima, K., Nakamura, S. & Nagasaka, T., 2008 Apr 1, In : Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy. 87, 4, p. 247-253 7 p.

Research output: Contribution to journalReview article

Substance flow analysis of zinc associated with iron and steel cycle in Japan, and environmental assessment of EAF dust recycling process

Nakajima, K., Matsubae-Yokoyama, K., Nakamura, S., Itoh, S. & Nagasaka, T., 2008 Dec 24, In : ISIJ International. 48, 10, p. 1478-1483 6 p.

Research output: Contribution to journalArticle

30 Citations (Scopus)
2007

Evaluating eco-efficiency of appliances by integrated use of hybrid LCA and LCC tools

Nakamura, S., 2007 Dec 1, Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses - Proceedings of the 14th CIRP Conference on Life Cycle Engineering. p. 445-448 4 p. (Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses - Proceedings of the 14th CIRP Conference on Life Cycle Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Five years in the area of input-output and hybrid LCA

Suh, S. & Nakamura, S., 2007 Sep 1, In : International Journal of Life Cycle Assessment. 12, 6, p. 351-352 2 p.

Research output: Contribution to journalEditorial

80 Citations (Scopus)

Measuring spatial repercussion effects of regional waste management

Kagawa, S., Nakamura, S., Inamura, H. & Yamada, M., 2007 Jul 1, In : Resources, Conservation and Recycling. 51, 1, p. 141-174 34 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

The waste input-output approach to materials flow analysis: Concepts and application to base metals

Nakamura, S., Nakajima, K., Kondo, Y. & Nagasaka, T., 2007 Sep 1, In : Journal of Industrial Ecology. 11, 4, p. 50-63 14 p.

Research output: Contribution to journalReview article

119 Citations (Scopus)
2006

A waste input-output life-cycle cost analysis of the recycling of end-of-life electrical home appliances

Nakamura, S. & Kondo, Y., 2006 May 25, In : Ecological Economics. 57, 3, p. 494-506 13 p.

Research output: Contribution to journalArticle

63 Citations (Scopus)

Hybrid LCC of appliances with different energy efficiency

Nakamura, S. & Kondo, Y., 2006 Sep 1, In : International Journal of Life Cycle Assessment. 11, 5, p. 305-314 10 p.

Research output: Contribution to journalArticle

30 Citations (Scopus)
9 Citations (Scopus)

Waste input-output material flow analysis and its application to quantity metals

Nakamura, S. & Nakajima, K., 2006 Jun 1, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 70, 6, p. 505-510 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2005

Inter-regional waste input-output linear programming model and its application to the Japanese regions

Kondo, Y., Kagawa, S. & Nakamura, S., 2005 Dec 1, Proceedings - Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005. p. 694-698 5 p. 1619325. (Proceedings - Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Waste input-output linear programming model with its application to eco-efficiency analysis

Kondo, Y. & Nakamura, S., 2005 Dec 1, In : Economic Systems Research. 17, 4, p. 393-408 16 p.

Research output: Contribution to journalArticle

42 Citations (Scopus)

Waste input-output material flow analysis of metals in the japanese economy

Nakamura, S. & Nakajima, K., 2005 Dec 1, In : Materials Transactions. 46, 12, p. 2550-2553 4 p.

Research output: Contribution to journalArticle

53 Citations (Scopus)
2004
49 Citations (Scopus)