Calculated based on number of publications stored in Pure and citations from Scopus
20032022

Research activity per year

If you made any changes in Pure these will be visible here soon.
Filter
Conference contribution

Search results

  • 2019

    Development of insect cyborgs with artificial wings

    Kosaka, T., Shimizu, T., Sato, H. & Umezu, S., 2019 Sep, 2019 IEEE International Conference on Cyborg and Bionic Systems, CBS 2019. Institute of Electrical and Electronics Engineers Inc., p. 216-221 6 p. 9114516. (2019 IEEE International Conference on Cyborg and Bionic Systems, CBS 2019).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Flying cyborg: A new approach for the study of coleoptera's flight pitching

    Li, Y., Hu, Y., Umezu, S. & Sato, H., 2019 Sep, 2019 IEEE International Conference on Cyborg and Bionic Systems, CBS 2019. Institute of Electrical and Electronics Engineers Inc., p. 159-164 6 p. 9114392. (2019 IEEE International Conference on Cyborg and Bionic Systems, CBS 2019).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2018

    Highly Efficient Planar Perovskite Solar Cells Exploiting a Compact TiO/Anatase TiO Single Crystalline Nanoparticles Electron Transport Bilayer

    Shahiduzzaman, M., Ashikawa, H., Kuniyoshi, M., Kaneko, T., Umezu, S., Katsumata, T., Iwamori, S., Taima, T., Kakihana, M., Isomura, M. & Tomita, K., 2018 Nov 26, 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion, WCPEC 2018 - A Joint Conference of 45th IEEE PVSC, 28th PVSEC and 34th EU PVSEC. Institute of Electrical and Electronics Engineers Inc., p. 512-517 6 p. 8548216. (2018 IEEE 7th World Conference on Photovoltaic Energy Conversion, WCPEC 2018 - A Joint Conference of 45th IEEE PVSC, 28th PVSEC and 34th EU PVSEC).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 2017

    Thermal response and recession resistance of new thermal protection system using high-temperature CFRP sandwich panel

    Miyamoto, O., Kubota, Y., Aoki, T., Ishida, Y., Ogasawara, T. & Umezu, S., 2017, 68th International Astronautical Congress, IAC 2017: Unlocking Imagination, Fostering Innovation and Strengthening Security. International Astronautical Federation, IAF, p. 7941-7947 7 p. (Proceedings of the International Astronautical Congress, IAC; vol. 12).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2016

    Control of titania layer of Dye-Sensitized Solar Cell (DSC)

    Nakamura, Y., Takamori, K., Kunugi, Y., Iwamori, S. & Umezu, S., 2016, 32nd International Conference on Digital Printing Technologies, NIP 2016 - Technical Program and Proceedings. Society for Imaging Science and Technology, p. 370-373 4 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Finishing processes of Fused Deposition Modeling (FDM) 3D printer

    Takagishi, K. & Umezu, S., 2016, 32nd International Conference on Digital Printing Technologies, NIP 2016 - Technical Program and Proceedings. Society for Imaging Science and Technology, p. 10-13 4 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2015

    Fabrication and mechanical properties of C/C-HfC-SiC composites

    Yano, Y., Wada, K., Aoki, T., Ogasawara, T. & Umezu, S., 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, p. 657-661 5 p. (Key Engineering Materials; vol. 625).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Fabrication of comb shape of leading edge wing of dragonfly

    Umezu, S., Tanabe, N. & Hashimoto, H., 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, p. 182-186 5 p. (Key Engineering Materials; vol. 625).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Fundamental characteristics on nano porous titania layer of dye-sensitized solar cell (DSC) utilizing electrostatic 3D printer

    Ogawa, M., Kunugi, Y., Iwamor, S. & Umezu, S., 2015, International Conference on Digital Printing Technologies. Society for Imaging Science and Technology, Vol. 2015-January. p. 201-203 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2013

    Optimization of titania thickness of dye-sensitized solar cell(DSC) utilizing patterning with electrostatically-injected droplet (PELID) method

    Kosugi, K., Shimoyama, Y., Umezu, S., Kunugi, Y. & Ohmorri, H., 2013 Dec 1, NIP 2013: 29th International Conference on Digital Printing Technologies and Digital Fabrication 2013. p. 36-39 4 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Robot arm printer of electrostatic inkjet

    Kawata, S. & Umezu, S., 2013 Dec 1, NIP 2013: 29th International Conference on Digital Printing Technologies and Digital Fabrication 2013. p. 190-193 4 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2012

    Digital fabrication of 3D bio devices utilizing PELID (Patterning with Electrostatically-Injected Droplet) method

    Umezu, S., Hatta, T. & Ohmori, H., 2012 Dec 1, NIP 2012: 28th International Conference on Digital Printing Technologies and Digital Fabrication 2012 - Technical Program and Proceedings. p. 338-340 3 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Fabrication of artifical biomimetic wing of dragonfly and its aerodynamic effect

    Umezu, S., Hashimoto, H. & Ohmori, H., 2012 Jan 1, Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012. Spaan, H., Burke, T. & Shore, P. (eds.). euspen, p. 473-476 4 p. (Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2011

    Fabrication of dye-sensitised solar cell utilizing PELID (Patterning with Electrostatically-Injected Droplet) method

    Umezu, S., Kunugi, Y., Ohmori, H., Yano, Y., Fukasawa, A., Tokunaga, S. & Ishii, A., 2011 Jan 1, Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011. Shore, P., Spaan, H., Van Brussel, H. & Burke, T. (eds.). euspen, p. 522-525 4 p. (Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Fundamental characteristics on patterning TiO 2 of dye-sensitized solar cell utilizing PELID (Patterning with Electrostatically-Injected Droplet) method

    Umezu, S., Kunugi, Y., Yukimoto, T., Fukasawa, A. & Ohmori, H., 2011 Dec 1, NIP27: 27th International Conference on Digital Printing Technologies and Digital Fabrication 2011 - Technical Programs and Proceedings. p. 659-661 3 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2010

    Fabrication of solar cell utilizing digital fabrication technology

    Umezu, S., Kunugi, Y., Yuya, Y., Fukasawa, A., Tokunaga, S., Ishii, A., Azetsu, A. & Ohmori, H., 2010 Dec 1, 2010 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2010 Proceedings. p. 123-124 2 p. 5699693. (Conference on Optoelectronic and Microelectronic Materials and Devices, Proceedings, COMMAD).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Gelatin patterning utilizing Electrostatically-Injected Droplet (ELID) method

    Umezu, S., Kawanishi, M., Katsumi, Y., Kitajima, T., Sakuragi, M., Ohmori, H. & Ito, Y., 2010, NIP26: 26th International Conference on Digital Printing Technologies and Digital Fabrication 2010, DF 2010 - Technical Programs and Proceedings. p. 561-563 3 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Precision micro-fabrication by gelatin patterning with electrostatically-injected droplet (ELID) method

    Umezu, S., Kawanishi, M., Ohmori, H., Kitajima, T. & Ito, Y., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. Shore, P., Burke, T., Spaan, H. & Van Brussel, H. (eds.). euspen, p. 404-407 4 p. (Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2009

    Fundamental characteristics of printed cell structures utilizing micro-drop injection

    Umezu, S., Kitajima, T., Ohmori, H. & Ito, Y., 2009 Dec 1, NIP25: 25th International Conference on Digital Printing Technologies and Digital Fabrication 2009 - Technical Program and Proceedings. p. 407-410 4 p. (International Conference on Digital Printing Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Manufacture of cell fusion device utilizing mechanical fabrication and FIB fabrication

    Umezu, S., Naruse, T., Gong, J. S., Ohmori, H., Ito, Y. & Katahira, K., 2009, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. Brinksmeier, E., Burke, T., Van Brussel, H. & Spaan, H. (eds.). euspen, p. 297-300 4 p. (Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2008

    New fabrication techniques utilizing electrostatic inkjet phenomena

    Umezu, S., Katahira, K., Ohmori, H. & Kawamoto, H., 2008 Jan 1, Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008. Van Brussel, H., Brinksmeier, E., Spaan, H. & Burke, T. (eds.). euspen, p. 443-447 5 p. (Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • 2006

    Cross-talk of multi-nozzle in electrostatic inkjet system

    Umezu, S., Nakazawa, R. & Kawamoto, H., 2006 Dec 1, NIP22: 22nd International Conference on Digital Printing Technologies - Final Program and Proceedings. p. 66-68 3 p. (International Conference on Digital Printing Technologies; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • Electrostatic manipulation of particle

    Kawamoto, H., Ando, H. & Umezu, S., 2006 Dec 1, NIP22: 22nd International Conference on Digital Printing Technologies - Final Program and Proceedings. p. 176-179 4 p. (International Conference on Digital Printing Technologies; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)