If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

  • 739 Citations
  • 15 h-Index
  • 71 Article
  • 23 Conference contribution
  • 2 Conference article
  • 1 Chapter
2019
plastics
Metals
Plastics
porosity
metals
1 Citation (Scopus)

Compressive properties of A2024 alloy foam fabricated through a melt route and a semi-solid route

Kuwahara, T., Osaka, T., Saito, M. & Suzuki, S., 2019 Jan 1, In : Metals. 9, 2, 153.

Research output: Contribution to journalArticle

Open Access
Foams
Alloying elements
Crystals
Brittle fracture
Energy absorption
1 Citation (Scopus)

Effect of primary crystals on pore morphology during semi-solid foaming of A2024 alloys

Kuwahara, T., Saito, M., Osaka, T. & Suzuki, S., 2019 Jan 1, In : Metals. 9, 1, 88.

Research output: Contribution to journalArticle

Crystals
Macros
Foams
Blowing agents
Cooling water

Effects of TiC Addition on Directionally Solidified Microstructure of Ti6Al4V

Yamamoto, S., Date, N., Mori, Y., Suzuki, S., Watanabe, Y., Nakano, S. & Sato, N., 2019 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

Zone melting
Thermal gradients
Solidification
Molten materials
Aspect ratio

Fabrication of porous metals with unidirectionally aligned pores by rod-dipping process

Muto, D., Yoshida, T., Tamai, T., Sawada, M. & Suzuki, S., 2019 Jan 1, In : Materials Transactions. 60, 4, p. 544-553 10 p.

Research output: Contribution to journalArticle

dipping
rods
Metals
porosity
Fabrication

Melting and solidification behavior of Ti-6Al-4V powder during selective laser melting

Yamamoto, S., Azuma, H., Suzuki, S., Kajino, S., Sato, N., Okane, T., Nakano, S. & Shimizu, T., 2019 Jan 1, In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

Solidification
Melting
Powders
Lasers
Color

Microstructures and mechanical properties of fiber textures forming mesoscale structure of drawn fine high carbon steel wire

Gondo, S., Tanemura, R., Suzuki, S., Kajino, S., Asakawa, M., Takemoto, K. & Tashima, K., 2019 Feb 18, In : Materials Science and Engineering A. 747, p. 255-264 10 p.

Research output: Contribution to journalArticle

carbon steels
Carbon steel
textures
Textures
wire

Oxidation Resistance Improvement of Ni-Base Single-Crystal Superalloy Melted in a CaO Crucible

Sugiyama, T., Utada, S., Yokokawa, T., Osawa, M., Kawagishi, K., Suzuki, S. & Harada, H., 2019 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

oxidation resistance
Crucibles
Oxidation resistance
heat resistant alloys
crucibles

Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground

Fukuda, H., Shiinoki, M., Nishimura, Y. & Suzuki, S., 2019 Apr 1, In : International Journal of Heat and Mass Transfer. p. 531-541 11 p.

Research output: Contribution to journalArticle

liquid metals
Liquid metals
diffusion coefficient
error functions
coefficients
2018

Analysis Method Using Two-Wavelength Mach-Zehnder Interferometer for the Measurement of Soret Coefficients in Soret-Facet Mission on ISS

Tomaru, M., Osada, T., Orikasa, I., Suzuki, S. & Inatomi, Y., 2018 Jan 1, (Accepted/In press) In : Microgravity Science and Technology.

Research output: Contribution to journalArticle

Soret coefficient
Mach-Zehnder Interferometer
Mach-Zehnder interferometers
International Space Station
Facet

Correction to: Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Sugiyama, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2018 Jul 12, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1 p.

Research output: Contribution to journalArticle

creep properties
Phase stability
heat resistant alloys
Desulfurization
Superalloys
3 Citations (Scopus)

Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Sugiyama, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2018 Jun 28, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-13 13 p.

Research output: Contribution to journalArticle

creep properties
Phase stability
heat resistant alloys
Desulfurization
Superalloys

Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software

Murasawa, K., Takamura, M., Kumagai, M., Ikeda, Y., Suzuki, H., Otake, Y., Hama, T. & Suzuki, S., 2018 Jan 1, In : Materials Transactions. 59, 7, p. 1135-1141 7 p.

Research output: Contribution to journalArticle

Crystallite size
computer programs
Diffraction patterns
profiles
Steel

Directionally-solidified dendrite morphology with eight secondary arms in an FCC ordered phase alloy

Mori, Y., Harada, H., Yokokawa, T., Kobayashi, T. & Suzuki, S., 2018 Oct 15, In : Journal of Crystal Growth. 500, p. 15-22 8 p.

Research output: Contribution to journalArticle

dendrites
Solidification
solidification
Dendrites (metallography)
cast alloys
1 Citation (Scopus)

Effect of cementite dispersion on void formation process in spheroidize-annealed steels

Maeda, M., Shimamura, J. & Suzuki, S., 2018 Aug 15, In : ISIJ International. 58, 8, p. 1490-1499 10 p.

Research output: Contribution to journalArticle

Steel
Ductile fracture
Ferrite
Electron microscopes
Diffraction
1 Citation (Scopus)

Establishing a simple and reliable method of measuring ductility of fine metal wire

Gondo, S., Suzuki, S., Asakawa, M., Takemoto, K., Tashima, K. & Kajino, S., 2018 Dec 1, In : International Journal of Mechanical and Materials Engineering. 13, 1, 5.

Research output: Contribution to journalArticle

Ductility
Metals
Elongation
Wire
Grippers
1 Citation (Scopus)
energy absorption
Energy absorption
aluminum alloys
Extrusion
Aluminum alloys

Investigation on Stress Relaxation Behavior of High-Strength Steel Sheets Based on Elasto-viscoplasticity

Takamura, M., Murasawa, K., Kusuda, Y., Suzuki, Y., Hakoyama, T., Ikeda, Y., Otake, Y., Hama, T. & Suzuki, S., 2018 Aug 6, In : Journal of Physics: Conference Series. 1063, 1, 12123.

Research output: Contribution to journalConference article

viscoplasticity
high strength steels
stress relaxation
strain rate
chutes

Reduction of Cracks During Punching Process by Cementite in High Tensile Strength Steel Sheets

Okano, T., Inoue, C., Suzuki, S., Yamazaki, K. & Toyoda, S., 2018 Jan 1, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

cementite
Punching
Steel sheet
tensile strength
voids
1 Citation (Scopus)

Self-diffusion Measurements of Liquid Sn Using the Shear Cell Technique and Stable Density Layering

Shiinoki, M., Hashimoto, N., Fukuda, H., Ando, Y. & Suzuki, S., 2018 Jan 1, (Accepted/In press) In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

Research output: Contribution to journalArticle

diffusion coefficient
shear
Liquids
liquids
cells

Time and flow stress dependences of internal stress during stress relaxation

Kusuda, Y., Murasawa, K., Suzuki, Y., Suzuki, S., Takamura, M., Hakoyama, T., Ikeda, Y., Otake, Y. & Hama, T., 2018 Jan 1, In : Procedia Manufacturing. 15, p. 1746-1753 8 p.

Research output: Contribution to journalConference article

Open Access
Stress relaxation
Plastic flow
Residual stresses
Formability
Strain rate
2017

Simple energy dissipation model of riveted lap joint in aircraft structure

Tachi, T., Machida, S., Okada, T. & Suzuki, S., 2017 Jan 1, In : Transactions of the Japan Society for Aeronautical and Space Sciences. 60, 6, p. 341-346 6 p.

Research output: Contribution to journalArticle

lap joints
aircraft structures
Hysteresis loops
energy dissipation
hysteresis
1 Citation (Scopus)
cementite
tensile deformation
high strength steels
Steel sheet
High strength steel
2016
2 Citations (Scopus)

Crack formation and propagation mechanism in the punching process of high tensile strength steel sheet

Okano, T., Sakumoto, K., Yamazaki, K., Toyoda, S. & Suzuki, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 643-651 9 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Punching
Steel sheet
Crack initiation
Crack propagation
Tensile strength
4 Citations (Scopus)

Design of next generation Ni-base single crystal superalloys containing Ir: Towards 1150 °c temperature capability

Yokokawa, T., Harada, H., Mori, Y., Kawagishi, K., Koizumi, Y., Kobayashi, T., Yuyama, M. & Suzuki, S., 2016, SUPERALLOYS 2016 - Proceedings of the 13th International Symposium on Superalloys. Minerals, Metals and Materials Society, Vol. 2016-January. p. 123-130 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat resistant alloys
Superalloys
Creep
Single crystals
single crystals

Effect of cementite on ductile fracture in high tensile strength steel sheets

Maeda, M., Shimamura, J. & Suzuki, S., 2016, Materials Science and Technology Conference and Exhibition 2016, MS and T 2016. Association for Iron and Steel Technology, AISTECH, Vol. 1. p. 573-577 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile fracture
Steel sheet
Tensile strength
Ferrite
Crystals
1 Citation (Scopus)

Effect of sulfur on creep strength of Ni-base single-crystal superalloy, TMS-1700

Joh, Y., Utada, S., Osawa, M., Kobayashi, T., Yokokawa, T., Kawagishi, K., Suzuki, S. & Harada, H., 2016, In : Materials Transactions. 57, 8, p. 1305-1308 4 p.

Research output: Contribution to journalArticle

creep strength
heat resistant alloys
Superalloys
Sulfur
Creep
2 Citations (Scopus)

High temperature properties of a single crystal superalloy PWA1484 directly recycled after turbine blade use

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2016, SUPERALLOYS 2016 - Proceedings of the 13th International Symposium on Superalloys. Minerals, Metals and Materials Society, Vol. 2016-January. p. 591-599 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High temperature properties
turbine blades
heat resistant alloys
Superalloys
Turbomachine blades
2 Citations (Scopus)

Improvement of ductility with maintaining strength of drawn high carbon steel wire

Gondo, S., Suzuki, S., Asakawa, M., Takemoto, K., Tashima, K. & Kajino, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 32-38 7 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Ductility
Wire
Elongation
Tensile strength
2 Citations (Scopus)

Phase stability of nickel-base single crystal superalloys containing iridium substituting for ruthenium

Mori, Y., Yokokawa, T., Kobayashi, T., Harada, H. & Suzuki, S., 2016, In : Materials Transactions. 57, 10, p. 1845-1848 4 p.

Research output: Contribution to journalArticle

Iridium
Ruthenium
Phase stability
heat resistant alloys
iridium
1 Citation (Scopus)

Texture evaluation in ductile fracture process by neutron diffraction measurement

Sunaga, H., Takamura, M., Ikeda, Y., Otake, Y., Hama, T., Kumagai, M., Suzuki, H. & Suzuki, S., 2016 Sep 1, In : Journal of Physics: Conference Series. 734, 3, 032027.

Research output: Contribution to journalArticle

neutron diffraction
textures
evaluation
plastic deformation
diffraction patterns
2 Citations (Scopus)

The influence of strain rate and strain on the behavior of stress relaxation in 980 MPa-grade dual phase steel sheets

Murasawa, K., Komine, H., Otake, Y., Sunaga, H., Takamura, M., Ikeda, Y. & Suzuki, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 948-953 6 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stress relaxation
Steel sheet
Strain rate
2015
1 Citation (Scopus)

Energy dissipation in a riveted lap joint of aircraft structure under in-plane tensile and shear loading

Nishimuro, J., Suzuki, S., Machida, S. & Okada, T., 2015, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rivets
Energy dissipation
Aircraft
Jigs
Dilatometers
2 Citations (Scopus)

Measurements of Interdiffusion Coefficients in Liquid AuGe Alloy

Tanimoto, K., Ando, Y., Suzuki, K., Yokoyama, Y. & Suzuki, S., 2015 Sep 1, In : Microgravity Science and Technology. 27, 5, p. 345-351 7 p.

Research output: Contribution to journalArticle

Liquid
Eutectics
eutectics
Liquids
Coefficient
2014
1 Citation (Scopus)

Effect of ECAE on structure and strength of porous A6061 alloy with aligned unidirectional pores

Suganuma, K., Hayashida, T., Yuasa, T. & Suzuki, S., 2014, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 622-623. p. 148-154 7 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Aluminum alloys
Aluminum pipe
Metals
Vickers hardness

Fabrication of porous Al-Cu alloys with aligned unidirectional pores by dipping pipes in melt and semi-solid slurry

Hayashida, T., Suzuki, S., Ichikawa, J. & Toyoyama, R., 2014, In : Keikinzoku/Journal of Japan Institute of Light Metals. 64, 2, p. 49-55 7 p.

Research output: Contribution to journalArticle

Pipe
Fabrication
Metals
Grain boundaries
Aluminum pipe
2 Citations (Scopus)

Improvement in punching properties of high tensile strength steel sheet by heat-treatments for reduction of center segregation

Sakumoto, K., Yamazaki, K., Kobayashi, T. & Suzuki, S., 2014, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 622-623. p. 1075-1080 6 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Punching
Steel sheet
Tensile strength
Heat treatment
Crack initiation
2013
4 Citations (Scopus)

Compressive properties of porous aluminum alloy fabricated by joining pipes and melt through continuous casting

Ichikawa, J., Hayashida, T. & Suzuki, S., 2013, Materials Science Forum. Vol. 761. p. 151-155 5 p. (Materials Science Forum; vol. 761).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous casting
Joining
aluminum alloys
Aluminum alloys
Pipe
3 Citations (Scopus)

Fabrication of porous Al-Cu alloys with aligned unidirectional pores by dipping pipes in melt and semi-solid slurry

Hayashida, T., Suzuki, S., Ichikawa, J. & Toyoyama, R., 2013, In : Materials Transactions. 54, 11, p. 2102-2108 7 p.

Research output: Contribution to journalArticle

dipping
Pipe
porosity
Fabrication
fabrication
2012
1 Citation (Scopus)

Enhancement of the hardness of lotus-type porous copper by shot peening

Koriyama, S., Sae-Tae, P., Suzuki, S., Asakawa, M., Ide, T. & Nakajima, H., 2012, Steel Research International. Wiley-VCH Verlag, Vol. SPL. ISSUE. p. 1215-1218 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

shot peening
Shot peening
Copper
hardness
Hardness
7 Citations (Scopus)

Fabrication of porous aluminum alloy with aligned unidirectional pores by dipping pipes in base metal melt

Ichikawa, J., Suzuki, S., Hayashida, T., Yahara, R. & Nakae, H., 2012, In : Materials Transactions. 53, 10, p. 1790-1794 5 p.

Research output: Contribution to journalArticle

dipping
aluminum alloys
Aluminum alloys
Metals
Pipe
11 Citations (Scopus)

Strengthening of lotus-type porous copper by ECAE process

Lobos, J., Suzuki, S., Utsunomiya, H., Nakajima, H. & Rodrigez-Perez, M. A., 2012 Oct, In : Journal of Materials Processing Technology. 212, 10, p. 2007-2011 5 p.

Research output: Contribution to journalArticle

Extrusion
Strengthening (metal)
Strengthening
Copper
Closure
2011
2 Citations (Scopus)

Application of lotus-type porous carbon steel to moving body of machine tools

Kashihara, M., Yamamoto, K., Furuta, M., Yonetani, H., Tsumura, T., Nakata, K., Kim, S. Y., Suzuki, S. & Nakajfma, H., 2011, In : Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 77, 784, p. 4693-4703 11 p.

Research output: Contribution to journalArticle

Machine tools
Carbon steel
Cast iron
Machining centers
Rigidity
1 Citation (Scopus)

Improvement of strength of lotus-type porous aluminum through ECAE process

Kim, T. B., Tane, M., Suzuki, S., Ide, T., Utsunomiya, H. & Nakajima, H., 2011, Materials Science Forum. Vol. 695. p. 263-266 4 p. (Materials Science Forum; vol. 695).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Extrusion
Vickers hardness
aluminum
porosity
3 Citations (Scopus)

Strength and pore morphology of porous aluminum and porous copper with directional pores deformed by equal channel angular extrusion

Kim, T. B., Tane, M., Suzuki, S., Utsunomiya, H., Ide, T. & Nakajima, H., 2011 Mar 15, In : Materials Science and Engineering A. 528, 6, p. 2363-2369 7 p.

Research output: Contribution to journalArticle

Aluminum
Extrusion
Copper
aluminum
porosity
2010
1 Citation (Scopus)

Deformation of lotus-type porous copper in rolling

Utsunomiya, H., Yukimoto, T., Sakai, T., Suzuki, S. & Nakajima, H., 2010, Materials Science Forum. Vol. 658. p. 328-331 4 p. (Materials Science Forum; vol. 658).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copper
copper
hardness
Hardness
porosity
1 Citation (Scopus)

Effect of addition of NiO powder on pore formation in lotus-type porous carbon steel fabricated by continuous casting

Kashihara, M., Yonetani, H., Suzuki, S. & Nakajima, H., 2010, Materials Science Forum. Vol. 658. p. 215-219 5 p. (Materials Science Forum; vol. 658).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

carbon steels
Continuous casting
Powders
Carbon steel
porosity
6 Citations (Scopus)

Effect of conditions of unidirectional solidification on microstructure and pore morphology of Al-Mg-Si alloys

Kim, T. B., Suzuki, S. & Nakajima, H., 2010 Mar, In : Materials Transactions. 51, 3, p. 496-502 7 p.

Research output: Contribution to journalArticle

Ingots
Aluminum
solidification
Solidification
Dendrites (metallography)
1 Citation (Scopus)

Fabrication of lotus-type porous Al-Ti alloys using the continuous casting technique

Kim, T. B., Suzuki, S. & Nakajima, H., 2010, Materials Science Forum. Vol. 658. p. 207-210 4 p. (Materials Science Forum; vol. 658).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous casting
porosity
Fabrication
Microstructure
fabrication
6 Citations (Scopus)

Fabrication of lotus-type porous carbon steel slabs by continuous casting technique in nitrogen atmosphere

Kashihara, M., Suzuki, S., Kawamura, Y., Kim, S. Y., Yonetani, H. & Nakajima, H., 2010 Sep, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 9, p. 2377-2382 6 p.

Research output: Contribution to journalArticle

carbon steels
Continuous casting
Carbon steel
slabs
Nitrogen