If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

  • 725 Citations
  • 15 h-Index
  • 71 Article
  • 23 Conference contribution
  • 2 Conference article
  • 1 Chapter
Filter
Conference contribution
2016
1 Citation (Scopus)

Crack formation and propagation mechanism in the punching process of high tensile strength steel sheet

Okano, T., Sakumoto, K., Yamazaki, K., Toyoda, S. & Suzuki, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 643-651 9 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Punching
Steel sheet
Crack initiation
Crack propagation
Tensile strength
3 Citations (Scopus)

Design of next generation Ni-base single crystal superalloys containing Ir: Towards 1150 °c temperature capability

Yokokawa, T., Harada, H., Mori, Y., Kawagishi, K., Koizumi, Y., Kobayashi, T., Yuyama, M. & Suzuki, S., 2016, SUPERALLOYS 2016 - Proceedings of the 13th International Symposium on Superalloys. Minerals, Metals and Materials Society, Vol. 2016-January. p. 123-130 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat resistant alloys
Superalloys
Creep
Single crystals
single crystals

Effect of cementite on ductile fracture in high tensile strength steel sheets

Maeda, M., Shimamura, J. & Suzuki, S., 2016, Materials Science and Technology Conference and Exhibition 2016, MS and T 2016. Association for Iron and Steel Technology, AISTECH, Vol. 1. p. 573-577 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile fracture
Steel sheet
Tensile strength
Ferrite
Crystals

High temperature properties of a single crystal superalloy PWA1484 directly recycled after turbine blade use

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2016, SUPERALLOYS 2016 - Proceedings of the 13th International Symposium on Superalloys. Minerals, Metals and Materials Society, Vol. 2016-January. p. 591-599 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High temperature properties
turbine blades
heat resistant alloys
Superalloys
Turbomachine blades
2 Citations (Scopus)

Improvement of ductility with maintaining strength of drawn high carbon steel wire

Gondo, S., Suzuki, S., Asakawa, M., Takemoto, K., Tashima, K. & Kajino, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 32-38 7 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Ductility
Wire
Elongation
Tensile strength
2 Citations (Scopus)

The influence of strain rate and strain on the behavior of stress relaxation in 980 MPa-grade dual phase steel sheets

Murasawa, K., Komine, H., Otake, Y., Sunaga, H., Takamura, M., Ikeda, Y. & Suzuki, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 948-953 6 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stress relaxation
Steel sheet
Strain rate
2015
1 Citation (Scopus)

Energy dissipation in a riveted lap joint of aircraft structure under in-plane tensile and shear loading

Nishimuro, J., Suzuki, S., Machida, S. & Okada, T., 2015, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rivets
Energy dissipation
Aircraft
Jigs
Dilatometers
2014
1 Citation (Scopus)

Effect of ECAE on structure and strength of porous A6061 alloy with aligned unidirectional pores

Suganuma, K., Hayashida, T., Yuasa, T. & Suzuki, S., 2014, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 622-623. p. 148-154 7 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Aluminum alloys
Aluminum pipe
Metals
Vickers hardness
2 Citations (Scopus)

Improvement in punching properties of high tensile strength steel sheet by heat-treatments for reduction of center segregation

Sakumoto, K., Yamazaki, K., Kobayashi, T. & Suzuki, S., 2014, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 622-623. p. 1075-1080 6 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Punching
Steel sheet
Tensile strength
Heat treatment
Crack initiation
2013
4 Citations (Scopus)

Compressive properties of porous aluminum alloy fabricated by joining pipes and melt through continuous casting

Ichikawa, J., Hayashida, T. & Suzuki, S., 2013, Materials Science Forum. Vol. 761. p. 151-155 5 p. (Materials Science Forum; vol. 761).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous casting
Joining
aluminum alloys
Aluminum alloys
Pipe
2012
1 Citation (Scopus)

Enhancement of the hardness of lotus-type porous copper by shot peening

Koriyama, S., Sae-Tae, P., Suzuki, S., Asakawa, M., Ide, T. & Nakajima, H., 2012, Steel Research International. Wiley-VCH Verlag, Vol. SPL. ISSUE. p. 1215-1218 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

shot peening
Shot peening
Copper
hardness
Hardness
2011
1 Citation (Scopus)

Improvement of strength of lotus-type porous aluminum through ECAE process

Kim, T. B., Tane, M., Suzuki, S., Ide, T., Utsunomiya, H. & Nakajima, H., 2011, Materials Science Forum. Vol. 695. p. 263-266 4 p. (Materials Science Forum; vol. 695).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Extrusion
Vickers hardness
aluminum
porosity
2010
1 Citation (Scopus)

Deformation of lotus-type porous copper in rolling

Utsunomiya, H., Yukimoto, T., Sakai, T., Suzuki, S. & Nakajima, H., 2010, Materials Science Forum. Vol. 658. p. 328-331 4 p. (Materials Science Forum; vol. 658).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copper
copper
hardness
Hardness
porosity
1 Citation (Scopus)

Effect of addition of NiO powder on pore formation in lotus-type porous carbon steel fabricated by continuous casting

Kashihara, M., Yonetani, H., Suzuki, S. & Nakajima, H., 2010, Materials Science Forum. Vol. 658. p. 215-219 5 p. (Materials Science Forum; vol. 658).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

carbon steels
Continuous casting
Powders
Carbon steel
porosity
1 Citation (Scopus)

Fabrication of lotus-type porous Al-Ti alloys using the continuous casting technique

Kim, T. B., Suzuki, S. & Nakajima, H., 2010, Materials Science Forum. Vol. 658. p. 207-210 4 p. (Materials Science Forum; vol. 658).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous casting
porosity
Fabrication
Microstructure
fabrication

Fabrication of lotus-type porous magnesium with anisotropic directional pores by mold casting technique

Sugihara, K., Suzuki, S. & Nakajima, H., 2010, Materials Science Forum. Vol. 658. p. 201-206 6 p. (Materials Science Forum; vol. 658).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ingots
Thermal gradients
Magnesium
magnesium
Hydrogen
2009

Fabrication of lotus-type porous metals through thermal decomposition of compounds

Nakajima, H., Tane, M., Suzuki, S. & Kim, S. Y., 2009, The Minerals, Metals and Materials Society - 3rd International Conference on Processing Materials for Properties 2008, PMP III. Vol. 1. p. 121-126 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pyrolysis
Gases
Metals
Fabrication
Solidification
2 Citations (Scopus)

Structure change and improvement of the mechanical properties of lotus-type porous copper by ECAE process

Lobos, J., Suzuki, S., Utsunomiya, H. & Nakajima, H., 2009, Materials Science Forum. Vol. 620 622. p. 757-760 4 p. (Materials Science Forum; vol. 620 622).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Copper
mechanical properties
yield strength
copper
2008

Equal-channel angular extrusion of lotus-type porous copper

Suzuki, S., Nakajima, H. & Utsunomiya, H., 2008, MetFoam 2007 - Proceedings of the 5th International Conference on Porous Metals and Metallic Foams. p. 205-208 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Copper
Axial compression
Vickers hardness
Densification
6 Citations (Scopus)

Fabrication of lotus-type porous Al-Si alloys using continuous casting technique

Park, J. S., Suzuki, S., Nakajima, H. & Hyun, S. K., 2008, MetFoam 2007 - Proceedings of the 5th International Conference on Porous Metals and Metallic Foams. p. 229-232 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous casting
Silicon
Porosity
Fabrication
Eutectics
4 Citations (Scopus)

Fabrication of lotus-type porous carbon-steel by continuous casting technique in nitrogen atmosphere

Kashihara, M., Yonetani, H., Suzuki, S., S.Hyun, K., S.Kim, Y., Kawamura, Y. & Nakajima, H., 2008, MetFoam 2007 - Proceedings of the 5th International Conference on Porous Metals and Metallic Foams. p. 201-204 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous casting
Carbon steel
Nitrogen
Fabrication
Solidification
1 Citation (Scopus)

Fabrication of lotus-type porous magnesium by continuous casting process

Hyun, S. K., Suzuki, S. & Nakajima, H., 2008, MetFoam 2007 - Proceedings of the 5th International Conference on Porous Metals and Metallic Foams. p. 233-235 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous casting
Magnesium
Fabrication
Skin
Porosity
2006
5 Citations (Scopus)

Preflight diffusion experiments on liquid metals under 1g conditions for the FOTON-M2 mission

Suzuki, S., Kraatz, K. H., Frohberg, G., Roşu, R., Wendl, W. & Müller-Vogt, G., 2006 Sep, Annals of the New York Academy of Sciences. Vol. 1077. p. 380-394 15 p. (Annals of the New York Academy of Sciences; vol. 1077).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid metals
Metals
Weightlessness
Microgravity
Berlin