If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

  • 735 Citations
  • 15 h-Index
  • 71 Article
  • 23 Conference contribution
  • 2 Conference article
  • 1 Chapter
Filter
Article
2019
plastics
Metals
Plastics
porosity
metals
1 Citation (Scopus)

Compressive properties of A2024 alloy foam fabricated through a melt route and a semi-solid route

Kuwahara, T., Osaka, T., Saito, M. & Suzuki, S., 2019 Jan 1, In : Metals. 9, 2, 153.

Research output: Contribution to journalArticle

Open Access
Foams
Alloying elements
Crystals
Brittle fracture
Energy absorption
1 Citation (Scopus)

Effect of primary crystals on pore morphology during semi-solid foaming of A2024 alloys

Kuwahara, T., Saito, M., Osaka, T. & Suzuki, S., 2019 Jan 1, In : Metals. 9, 1, 88.

Research output: Contribution to journalArticle

Crystals
Macros
Foams
Blowing agents
Cooling water

Effects of TiC Addition on Directionally Solidified Microstructure of Ti6Al4V

Yamamoto, S., Date, N., Mori, Y., Suzuki, S., Watanabe, Y., Nakano, S. & Sato, N., 2019 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

Zone melting
Thermal gradients
Solidification
Molten materials
Aspect ratio

Fabrication of porous metals with unidirectionally aligned pores by rod-dipping process

Muto, D., Yoshida, T., Tamai, T., Sawada, M. & Suzuki, S., 2019 Jan 1, In : Materials Transactions. 60, 4, p. 544-553 10 p.

Research output: Contribution to journalArticle

dipping
rods
Metals
porosity
Fabrication

Melting and solidification behavior of Ti-6Al-4V powder during selective laser melting

Yamamoto, S., Azuma, H., Suzuki, S., Kajino, S., Sato, N., Okane, T., Nakano, S. & Shimizu, T., 2019 Jan 1, In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

Solidification
Melting
Powders
Lasers
Color

Microstructures and mechanical properties of fiber textures forming mesoscale structure of drawn fine high carbon steel wire

Gondo, S., Tanemura, R., Suzuki, S., Kajino, S., Asakawa, M., Takemoto, K. & Tashima, K., 2019 Feb 18, In : Materials Science and Engineering A. 747, p. 255-264 10 p.

Research output: Contribution to journalArticle

carbon steels
Carbon steel
textures
Textures
wire

Oxidation Resistance Improvement of Ni-Base Single-Crystal Superalloy Melted in a CaO Crucible

Sugiyama, T., Utada, S., Yokokawa, T., Osawa, M., Kawagishi, K., Suzuki, S. & Harada, H., 2019 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

oxidation resistance
Crucibles
Oxidation resistance
heat resistant alloys
crucibles

Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground

Fukuda, H., Shiinoki, M., Nishimura, Y. & Suzuki, S., 2019 Apr 1, In : International Journal of Heat and Mass Transfer. p. 531-541 11 p.

Research output: Contribution to journalArticle

liquid metals
Liquid metals
diffusion coefficient
error functions
coefficients
2018

Analysis Method Using Two-Wavelength Mach-Zehnder Interferometer for the Measurement of Soret Coefficients in Soret-Facet Mission on ISS

Tomaru, M., Osada, T., Orikasa, I., Suzuki, S. & Inatomi, Y., 2018 Jan 1, (Accepted/In press) In : Microgravity Science and Technology.

Research output: Contribution to journalArticle

Soret coefficient
Mach-Zehnder Interferometer
Mach-Zehnder interferometers
International Space Station
Facet

Correction to: Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Sugiyama, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2018 Jul 12, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1 p.

Research output: Contribution to journalArticle

creep properties
Phase stability
heat resistant alloys
Desulfurization
Superalloys
3 Citations (Scopus)

Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Sugiyama, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2018 Jun 28, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-13 13 p.

Research output: Contribution to journalArticle

creep properties
Phase stability
heat resistant alloys
Desulfurization
Superalloys

Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software

Murasawa, K., Takamura, M., Kumagai, M., Ikeda, Y., Suzuki, H., Otake, Y., Hama, T. & Suzuki, S., 2018 Jan 1, In : Materials Transactions. 59, 7, p. 1135-1141 7 p.

Research output: Contribution to journalArticle

Crystallite size
computer programs
Diffraction patterns
profiles
Steel

Directionally-solidified dendrite morphology with eight secondary arms in an FCC ordered phase alloy

Mori, Y., Harada, H., Yokokawa, T., Kobayashi, T. & Suzuki, S., 2018 Oct 15, In : Journal of Crystal Growth. 500, p. 15-22 8 p.

Research output: Contribution to journalArticle

dendrites
Solidification
solidification
Dendrites (metallography)
cast alloys
1 Citation (Scopus)

Effect of cementite dispersion on void formation process in spheroidize-annealed steels

Maeda, M., Shimamura, J. & Suzuki, S., 2018 Aug 15, In : ISIJ International. 58, 8, p. 1490-1499 10 p.

Research output: Contribution to journalArticle

Steel
Ductile fracture
Ferrite
Electron microscopes
Diffraction
1 Citation (Scopus)

Establishing a simple and reliable method of measuring ductility of fine metal wire

Gondo, S., Suzuki, S., Asakawa, M., Takemoto, K., Tashima, K. & Kajino, S., 2018 Dec 1, In : International Journal of Mechanical and Materials Engineering. 13, 1, 5.

Research output: Contribution to journalArticle

Ductility
Metals
Elongation
Wire
Grippers
1 Citation (Scopus)
energy absorption
Energy absorption
aluminum alloys
Extrusion
Aluminum alloys

Reduction of Cracks During Punching Process by Cementite in High Tensile Strength Steel Sheets

Okano, T., Inoue, C., Suzuki, S., Yamazaki, K. & Toyoda, S., 2018 Jan 1, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

cementite
Punching
Steel sheet
tensile strength
voids
1 Citation (Scopus)

Self-diffusion Measurements of Liquid Sn Using the Shear Cell Technique and Stable Density Layering

Shiinoki, M., Hashimoto, N., Fukuda, H., Ando, Y. & Suzuki, S., 2018 Jan 1, (Accepted/In press) In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

Research output: Contribution to journalArticle

diffusion coefficient
shear
Liquids
liquids
cells
2017

Simple energy dissipation model of riveted lap joint in aircraft structure

Tachi, T., Machida, S., Okada, T. & Suzuki, S., 2017 Jan 1, In : Transactions of the Japan Society for Aeronautical and Space Sciences. 60, 6, p. 341-346 6 p.

Research output: Contribution to journalArticle

lap joints
aircraft structures
Hysteresis loops
energy dissipation
hysteresis
1 Citation (Scopus)
cementite
tensile deformation
high strength steels
Steel sheet
High strength steel
2016
1 Citation (Scopus)

Effect of sulfur on creep strength of Ni-base single-crystal superalloy, TMS-1700

Joh, Y., Utada, S., Osawa, M., Kobayashi, T., Yokokawa, T., Kawagishi, K., Suzuki, S. & Harada, H., 2016, In : Materials Transactions. 57, 8, p. 1305-1308 4 p.

Research output: Contribution to journalArticle

creep strength
heat resistant alloys
Superalloys
Sulfur
Creep
1 Citation (Scopus)

Phase stability of nickel-base single crystal superalloys containing iridium substituting for ruthenium

Mori, Y., Yokokawa, T., Kobayashi, T., Harada, H. & Suzuki, S., 2016, In : Materials Transactions. 57, 10, p. 1845-1848 4 p.

Research output: Contribution to journalArticle

Iridium
Ruthenium
Phase stability
heat resistant alloys
iridium
1 Citation (Scopus)

Texture evaluation in ductile fracture process by neutron diffraction measurement

Sunaga, H., Takamura, M., Ikeda, Y., Otake, Y., Hama, T., Kumagai, M., Suzuki, H. & Suzuki, S., 2016 Sep 1, In : Journal of Physics: Conference Series. 734, 3, 032027.

Research output: Contribution to journalArticle

neutron diffraction
textures
evaluation
plastic deformation
diffraction patterns
2015
2 Citations (Scopus)

Measurements of Interdiffusion Coefficients in Liquid AuGe Alloy

Tanimoto, K., Ando, Y., Suzuki, K., Yokoyama, Y. & Suzuki, S., 2015 Sep 1, In : Microgravity Science and Technology. 27, 5, p. 345-351 7 p.

Research output: Contribution to journalArticle

Liquid
Eutectics
eutectics
Liquids
Coefficient
2014

Fabrication of porous Al-Cu alloys with aligned unidirectional pores by dipping pipes in melt and semi-solid slurry

Hayashida, T., Suzuki, S., Ichikawa, J. & Toyoyama, R., 2014, In : Keikinzoku/Journal of Japan Institute of Light Metals. 64, 2, p. 49-55 7 p.

Research output: Contribution to journalArticle

Pipe
Fabrication
Metals
Grain boundaries
Aluminum pipe
2013
3 Citations (Scopus)

Fabrication of porous Al-Cu alloys with aligned unidirectional pores by dipping pipes in melt and semi-solid slurry

Hayashida, T., Suzuki, S., Ichikawa, J. & Toyoyama, R., 2013, In : Materials Transactions. 54, 11, p. 2102-2108 7 p.

Research output: Contribution to journalArticle

dipping
Pipe
porosity
Fabrication
fabrication
2012
7 Citations (Scopus)

Fabrication of porous aluminum alloy with aligned unidirectional pores by dipping pipes in base metal melt

Ichikawa, J., Suzuki, S., Hayashida, T., Yahara, R. & Nakae, H., 2012, In : Materials Transactions. 53, 10, p. 1790-1794 5 p.

Research output: Contribution to journalArticle

dipping
aluminum alloys
Aluminum alloys
Metals
Pipe
11 Citations (Scopus)

Strengthening of lotus-type porous copper by ECAE process

Lobos, J., Suzuki, S., Utsunomiya, H., Nakajima, H. & Rodrigez-Perez, M. A., 2012 Oct, In : Journal of Materials Processing Technology. 212, 10, p. 2007-2011 5 p.

Research output: Contribution to journalArticle

Extrusion
Strengthening (metal)
Strengthening
Copper
Closure
2011
2 Citations (Scopus)

Application of lotus-type porous carbon steel to moving body of machine tools

Kashihara, M., Yamamoto, K., Furuta, M., Yonetani, H., Tsumura, T., Nakata, K., Kim, S. Y., Suzuki, S. & Nakajfma, H., 2011, In : Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 77, 784, p. 4693-4703 11 p.

Research output: Contribution to journalArticle

Machine tools
Carbon steel
Cast iron
Machining centers
Rigidity
3 Citations (Scopus)

Strength and pore morphology of porous aluminum and porous copper with directional pores deformed by equal channel angular extrusion

Kim, T. B., Tane, M., Suzuki, S., Utsunomiya, H., Ide, T. & Nakajima, H., 2011 Mar 15, In : Materials Science and Engineering A. 528, 6, p. 2363-2369 7 p.

Research output: Contribution to journalArticle

Aluminum
Extrusion
Copper
aluminum
porosity
2010
6 Citations (Scopus)

Effect of conditions of unidirectional solidification on microstructure and pore morphology of Al-Mg-Si alloys

Kim, T. B., Suzuki, S. & Nakajima, H., 2010 Mar, In : Materials Transactions. 51, 3, p. 496-502 7 p.

Research output: Contribution to journalArticle

Ingots
Aluminum
solidification
Solidification
Dendrites (metallography)
6 Citations (Scopus)

Fabrication of lotus-type porous carbon steel slabs by continuous casting technique in nitrogen atmosphere

Kashihara, M., Suzuki, S., Kawamura, Y., Kim, S. Y., Yonetani, H. & Nakajima, H., 2010 Sep, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 9, p. 2377-2382 6 p.

Research output: Contribution to journalArticle

carbon steels
Continuous casting
Carbon steel
slabs
Nitrogen
2 Citations (Scopus)

Pore morphology of porous Al-Ti alloy fabricated by continuous casting in hydrogen atmosphere

Kim, T. B., Tane, M., Suzuki, S. & Nakajima, H., 2010 Oct, In : Materials Transactions. 51, 10, p. 1871-1877 7 p.

Research output: Contribution to journalArticle

Continuous casting
Hydrogen
porosity
atmospheres
Solidification
2009
16 Citations (Scopus)

Diffusion measurements using the shear cell technique: Investigation of the role of Marangoni convection by pre-flight experiments on the ground and during the Foton M2 mission

Roşu-Pflumm, R., Wendl, W., Müller-Vogt, G., Suzuki, S., Kraatz, K. H. & Frohberg, G., 2009 Dec, In : International Journal of Heat and Mass Transfer. 52, 25-26, p. 6042-6049 8 p.

Research output: Contribution to journalArticle

Marangoni convection
diffusion coefficient
flight
shear
interfacial tension

Effect of microstructure on pore morphology in Al-Mg-Si alloys fabricated by unidirectional solidification

Kim, T. B., Suzuki, S. & Nakajma, H., 2009 Dec, In : Keikinzoku/Journal of Japan Institute of Light Metals. 59, 12, p. 678-684 7 p.

Research output: Contribution to journalArticle

Ingots
Aluminum
Solidification
Dendrites (metallography)
Thermal gradients
8 Citations (Scopus)

Fabrication of Al-Cu alloy with elongated pores by continuous casting technique

Suzuki, S., Kim, T. B. & Nakajima, H., 2009, In : Journal of Physics: Conference Series. 165, 012068.

Research output: Contribution to journalArticle

dendrites
porosity
fabrication
eutectics
solidification
3 Citations (Scopus)

Fabrication of a lotus-type porous Al-Si alloy by continuous casting with a thermal decomposition method

Kim, T. B., Suzuki, S. & Nakajima, H., 2009, In : Journal of Physics: Conference Series. 165, 012067.

Research output: Contribution to journalArticle

pellets
thermal decomposition
fabrication
porosity
crucibles
33 Citations (Scopus)

Fabrication of lotus-type porous Al-Si alloys using the continuous casting technique

Park, J. S., Hyun, S. K., Suzuki, S. & Nakajima, H., 2009, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 40, 2, p. 406-414 9 p.

Research output: Contribution to journalArticle

Continuous casting
Silicon
porosity
Fabrication
Porosity
9 Citations (Scopus)

Fabrication of lotus-type porous carbon steel via continuous zone melting and its mechanical properties

Kashihara, M., Yonetani, H., Kobi, T., Hyun, S. K., Suzuki, S. & Nakajima, H., 2009 Oct 25, In : Materials Science and Engineering A. 524, 1-2, p. 112-118 7 p.

Research output: Contribution to journalArticle

Zone melting
zone melting
carbon steels
Carbon steel
mechanical properties

Mechanical property of lotus-type porous carbon steel fabricated by continuous casting method

Kawamura, Y., Suzuki, S., Kim, S. Y., Nakajima, H., Kashihara, M. & Yonetani, H., 2009, In : Journal of Physics: Conference Series. 165, 012071.

Research output: Contribution to journalArticle

carbon steels
mechanical properties
yield strength
normalizing
casts
9 Citations (Scopus)

Structural change and improvement of the mechanical properties of a lotus-type porous copper by wire-brushing

Lobos, J., Suzuki, S., Nakajima, H., Ji, Y. S., Fujii, H., Terada, D. & Tsuji, N., 2009, In : Journal of Physics: Conference Series. 165, 012070.

Research output: Contribution to journalArticle

wire
mechanical properties
copper
porosity
Vickers hardness
2008
17 Citations (Scopus)

Equal-channel angular extrusion process of lotus-type porous copper

Suzuki, S., Utsunomiya, H. & Nakajima, H., 2008 Aug 25, In : Materials Science and Engineering A. 490, 1-2, p. 465-470 6 p.

Research output: Contribution to journalArticle

Extrusion
Copper
porosity
copper
Axial compression
2 Citations (Scopus)

Fabrication and mechanical properties of Lotus-type porous carbon steel by unidirectional solidification in nitrogen atmosphere

Kashihara, M., Yonetani, H., Kobi, T., Hyun, S. K., Suzuki, S. & Nakajima, H., 2008, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 94, 1, p. 30-34 5 p.

Research output: Contribution to journalArticle

carbon steels
solidification
Carbon steel
Solidification
Nitrogen
2007
107 Citations (Scopus)

Effect of transference velocity and hydrogen pressure on porosity and pore morphology of lotus-type porous copper fabricated by a continuous casting technique

Park, J. S., Hyun, S. K., Suzuki, S. & Nakajima, H., 2007 Sep, In : Acta Materialia. 55, 16, p. 5646-5654 9 p.

Research output: Contribution to journalArticle

Continuous casting
Copper
Hydrogen
Porosity
Gases
9 Citations (Scopus)

Impurity diffusion measurements of Bi in liquid Sn using stable density layering and the shear cell technique

Suzuki, S., Kraatz, K. H., Frohberg, G., Roşu-Pflumm, R. & Müller-Vogt, G., 2007 Oct 15, In : Journal of Non-Crystalline Solids. 353, 32-40, p. 3300-3304 5 p.

Research output: Contribution to journalArticle

Impurities
shear
impurities
Liquids
liquids
23 Citations (Scopus)

Self-diffusion of Pd, Cu and Ni in Pd-based equilibrium melts

Griesche, A., Macht, M. P., Suzuki, S., Kraatz, K. H. & Frohberg, G., 2007 Sep, In : Scripta Materialia. 57, 6, p. 477-480 4 p.

Research output: Contribution to journalArticle

Molten materials
coupled modes
diffusion coefficient
Amorphous alloys
gravitation
2006
5 Citations (Scopus)
monotectic alloys
liquid alloys
Liquid
shear
diffusion coefficient
2 Citations (Scopus)

Endformnahe mikrobauteile durch superplastische umformung von metallischem massivglas

Translated title of the contribution: Near-net shape microcomponents obtained by superplastic forging of bulk metallic glassMacht, M. P., Zumkley, T., Suzuki, S. & Mechler, S., 2006 May, In : Praktische Metallographie/Practical Metallography. 43, 5, p. 215-223 9 p.

Research output: Contribution to journalArticle

forging
Metallic glass
metallic glasses
Forging
Glass
6 Citations (Scopus)

The effect of shear convection on diffusion measurements in liquid metals using the Foton shear cell

Suzuki, S., Kraatz, K. H. & Frohberg, G., 2006, In : Microgravity Science and Technology. 18, 3-4, p. 155-159 5 p.

Research output: Contribution to journalArticle

Liquid Metal
liquid metals
Liquid metals
Convection
convection