If you made any changes in Pure these will be visible here soon.

Research Output 1982 2019

2019

Life cycle simulation system as an evaluation platform for multitiered circular manufacturing systems

Takata, S., Suemasu, K. & Asai, K., 2019 Jan 1, In : CIRP Annals.

Research output: Contribution to journalArticle

Life cycle
Electric vehicles
Recycling

Selecting the optimum inspection method for preventive maintenance

Kuboki, N. & Takata, S., 2019 Jan 1, In : Procedia CIRP. 80, p. 512-517 6 p.

Research output: Contribution to journalConference article

Open Access
Preventive maintenance
Inspection
Deterioration
Monitoring
Costs
2018

Process-independent workstation layout for lean automation

Shigematsu, K., Yamazaki, Y., Kato, S., Kojima, F. & Takata, S., 2018 Jan 1, (Accepted/In press) In : CIRP Annals.

Research output: Contribution to journalArticle

Automation
Materials handling equipment
Developing countries
Costs
Personnel
2017

Continuous Improvement of Criteria for Condition-based Maintenance by Means of Effects Evaluation of Treatments

Morimoto, A., Sato, Y. & Takata, S., 2017, In : Procedia CIRP. 61, p. 293-298 6 p.

Research output: Contribution to journalArticle

Sensors
Preventive maintenance
Mechatronics
Deterioration
28 Citations (Scopus)

Design, management and control of demanufacturing and remanufacturing systems

Tolio, T., Bernard, A., Colledani, M., Kara, S., Seliger, G., Duflou, J., Battaia, O. & Takata, S., 2017, In : CIRP Annals - Manufacturing Technology. 66, 2, p. 585-609 25 p.

Research output: Contribution to journalArticle

Sustainable development
Automobile electronic equipment
Consumer products
Mechatronics
Industrial wastes
5 Citations (Scopus)

Design method of material handling systems for lean automation-Integrating equipment for reducing wasted waiting time

Yamazaki, Y., Shigematsu, K., Kato, S., Kojima, F., Onari, H. & Takata, S., 2017, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Materials handling
Automation
Materials handling equipment
Cost reduction
Costs

Determination of Optimum Criteria for Condition-based Maintenance of Automatic Ticket Gates Using Remote Monitoring Data

Sato, Y., Morimoto, A. & Takata, S., 2017, In : Procedia CIRP. 59, p. 190-195 6 p.

Research output: Contribution to journalArticle

Preventive maintenance
Mechatronics
Deterioration
Monitoring
Functional analysis

Preface

Takata, S., Umeda, Y. & Kondoh, S., 2017, In : Procedia CIRP. 61, p. 1 1 p.

Research output: Contribution to journalEditorial

2016
3 Citations (Scopus)

Condition based renewal and maintenance integrated planning

Iijima, H. & Takata, S., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Life cycle
Planning
Air conditioning
Monitoring
Costs
77 Citations (Scopus)

Continuous maintenance and the future - Foundations and technological challenges

Roy, R., Stark, R., Tracht, K., Takata, S. & Mori, M., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Life cycle
Costs
Visualization
Degradation
Industry
5 Citations (Scopus)

Lean Automation System Responding to the Changing Market

Yamazaki, Y., Takata, S., Onari, H., Kojima, F. & Kato, S., 2016, In : Procedia CIRP. 57, p. 201-206 6 p.

Research output: Contribution to journalArticle

Automation
Information technology
Engines
Costs
Industry

Service Selection Method for Facilitating Life Cycle Options in Environmentally Benign Product and Service Business

Matsumura, J., Dairokuno, Y. & Takata, S., 2016, In : Unknown Journal. 48, p. 90-95 6 p.

Research output: Contribution to journalArticle

Life cycle
cycles
products
Industry
2015
1 Citation (Scopus)

Module-based renewal planning of energy using products for reducing environmental load and life cycle cost

Iijima, H., Yoshida, S. & Takata, S., 2015, Procedia CIRP. Elsevier, Vol. 29. p. 162-167 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Life cycle
Planning
Costs
Air conditioning
Energy utilization
2013
10 Citations (Scopus)

BOM based supply chain risk management

Takata, S. & Yamanaka, M., 2013, In : CIRP Annals - Manufacturing Technology. 62, 1, p. 479-482 4 p.

Research output: Contribution to journalArticle

Supply chain management
Risk management
Supply chains
Hard disk storage
Disasters
4 Citations (Scopus)

Maintenance-centered circular manufacturing

Takata, S., 2013, Procedia CIRP. Vol. 11. p. 23-31 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Desulfurization
Air conditioning
Restoration
Life cycle
Actuators
2 Citations (Scopus)

Module reconfiguration management for circular factories without discriminating between virgin and reused products

Urano, K. & Takata, S., 2013, Re-Engineering Manufacturing for Sustainability - Proceedings of the 20th CIRP International Conference on Life Cycle Engineering. Springer-Verlag Berlin Heidelberg, p. 603-608 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Industrial plants
Costs
Life cycle
Industry
2012
3 Citations (Scopus)

Analysis of key success factors for eco-business through case studies in Japan

Kondoh, S., Kurakawa, K., Kato, S., Umeda, Y. & Takata, S., 2012 May, In : International Journal of Automation Technology. 6, 3, p. 252-263 12 p.

Research output: Contribution to journalArticle

Industry
Planning
Costs
9 Citations (Scopus)

Life cycle maintenance planning method in consideration of operation and maintenance integration

Tsutsui, M. & Takata, S., 2012 Feb, In : Production Planning and Control. 23, 2-3, p. 183-193 11 p.

Research output: Contribution to journalArticle

Life cycle
Planning
Heating furnaces
Costs
Repair
12 Citations (Scopus)

Reconfiguration management of remanufactured products for responding to varied user needs

Sakai, T. & Takata, S., 2012, In : CIRP Annals - Manufacturing Technology. 61, 1, p. 21-26 6 p.

Research output: Contribution to journalArticle

Life cycle
Sales
Costs
Industry
100 Citations (Scopus)

Toward integrated product and process life cycle planning - An environmental perspective

Umeda, Y., Takata, S., Kimura, F., Tomiyama, T., Sutherland, J. W., Kara, S., Herrmann, C. & Duflou, J. R., 2012, In : CIRP Annals - Manufacturing Technology. 61, 2, p. 681-702 22 p.

Research output: Contribution to journalArticle

Life cycle
Planning
2011
40 Citations (Scopus)

Human and robot allocation method for hybrid assembly systems

Takata, S. & Hirano, T., 2011, In : CIRP Annals - Manufacturing Technology. 60, 1, p. 9-12 4 p.

Research output: Contribution to journalArticle

Robots
Costs
Personnel
Planning
Industry
1 Citation (Scopus)

Systematic categorization of reuse and identification of issues in reuse management in the closed loop manufacturing

Sakai, T. & Takata, S., 2011, Glocalized Solutions for Sustainability in Manufacturing - Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. p. 425-430 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copying
Sales
Industry
2010
Engineering research
Sustainable development
Life cycle
2009
2 Citations (Scopus)

Exhausting lifetime by multitiered reuse with forced circulation in closed-loop manufacturing

Takata, S., Tsubouchi, K. & Yoshijima, S., 2009, In : International Journal of Sustainable Manufacturing. 1, 4, p. 450-462 13 p.

Research output: Contribution to journalArticle

manufacturing
Photoconducting materials
Life cycle
compulsion
life cycle
1 Citation (Scopus)

Life cycle maintenance planning system in consideration of operation and maintenance integration

Tsutsui, M. & Takata, S., 2009, Engineering Asset Lifecycle Management - Proceedings of the 4th World Congress on Engineering Asset Management, WCEAM 2009. p. 316-325 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Life cycle
Planning
Heating furnaces
Desulfurization
Costs
4 Citations (Scopus)

Maximizing utilization rate of office automation equipment by intraoffice circulation

Takata, S. & Tsubouchi, K., 2009, In : CIRP Annals - Manufacturing Technology. 58, 1, p. 33-36 4 p.

Research output: Contribution to journalArticle

Office automation
Genetic algorithms
2007
4 Citations (Scopus)

Module-based model change planning for improving reusability in consideration of customer satisfaction

Tsubouchi, K. & Takata, S., 2007, Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses - Proceedings of the 14th CIRP Conference on Life Cycle Engineering. p. 11-16 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Customer satisfaction
Reusability
Planning
Copying

Preface

Takata, S., 2007, In : Unknown Journal.

Research output: Contribution to journalArticle

68 Citations (Scopus)

Sustainability in manufacturing: Recovery of resources in product and material cycles

Seliger, G., Bayat, N., Consiglio, S., El Mernissi, A., Friedrich, T., Früsch, I., Gegusch, R., Harms, R., Hollan, R., Jungk, H., Kernbaum, S., Kind, C., Krause, F. L., Odry, D., Reise, C., Romahn, A., Rothenburg, U., Seliger, G., Sönnichsen, C., Uhlmann, E. & 30 others, Zettl, M., Ackermann, R., Dose, J., Fleischer, G., Alting, L., Hauschild, M. Z., Wenzel, H., Baumgarten, H., Butz, C., Pietschmann, N., Blessing, L., Gries, B., Klett, J., Chengtao, W., Ming, C., Djurdjanovic, D., Ni, J., Elmer, C. F., Filho, A. G., Oliveira, J. F. G., Ometto, A. R., Rozenfeld, H., Herrmann, C., Hesselbach, J., Luger, T., Lee, J., Wang, H., Middendorf, A., Reichl, H. & Takata, S., 2007, Springer Berlin Heidelberg. 423 p.

Research output: Book/ReportBook

Sustainable development
Recovery
Washing machines
Customer satisfaction
Mobile phones
2005
1 Citation (Scopus)

Module-based model change planning in consideration of environmental impact and customer satisfaction

Watanabe, M. & Takata, S., 2005, Proceedings - Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005. Vol. 2005. p. 170-176 7 p. 1619195

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copying
Customer satisfaction
Reusability
Environmental impact
Planning

Toward design support technologies for environmentally conscious businesses

Umeda, Y., Takata, S., Kondoh, S., Kurakawa, K. & Kato, S., 2005, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 71, 10, p. 1214-1218 5 p.

Research output: Contribution to journalArticle

Industry
2004
216 Citations (Scopus)

Maintenance: Changing role in life cycle management

Takata, S., Kimura, F., Van Houten, F. J. A. M., Westkämper, E., Shpitalni, M., Ceglarek, D. & Lee, J., 2004, In : CIRP Annals - Manufacturing Technology. 53, 2, p. 643-655 13 p.

Research output: Contribution to journalArticle

Life cycle
Energy utilization
2003
29 Citations (Scopus)

Life cycle simulation system for life cycle process planning

Takata, S. & Kimura, T., 2003, In : CIRP Annals - Manufacturing Technology. 52, 1, p. 37-40 4 p.

Research output: Contribution to journalArticle

Process planning
Life cycle
Product design
2002

Operation planning of industrial robots based on deterioration simulation

Translated title of the contribution: Operation planning of industrial robots based on deterioration simulationYamada, A., Yamamoto, R. & Takata, S., 2002 Jan, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 1, p. 53-57 5 p.

Research output: Contribution to journalArticle

Industrial robots
Deterioration
Life cycle
Planning
Robots
42 Citations (Scopus)

Real-time drill wear estimation based on spindle motor power

Kim, H. Y., Ahn, J. H., Kim, S. H. & Takata, S., 2002, In : Journal of Materials Processing Technology. 124, 3, p. 267-273 7 p., 5736.

Research output: Contribution to journalArticle

Drilling
Wear of materials
Real-time
Process Model
Torque
25 Citations (Scopus)
Industrial robots
Deterioration
Robots
Simulated annealing
Gears
2001
15 Citations (Scopus)

Disassembly operation support system with motion monitoring of a human operator

Takata, S., Isobe, H. & Fujii, H., 2001, In : CIRP Annals - Manufacturing Technology. 50, 1, p. 305-308 4 p.

Research output: Contribution to journalArticle

Copying
Monitoring
Sensors
Mathematical operators
Recycling
4 Citations (Scopus)

Life cycle management of industrial robots based on deterioration evaluation - Facility layout and motion planning taking account of joint gear wear

Yamada, A. & Takata, S., 2001, Proceedings - 2nd International Symposium on Environmentally Conscious Design and Inverse Manufacturing. Institute of Electrical and Electronics Engineers Inc., p. 460-465 6 p. 992399

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Industrial robots
Motion planning
Deterioration
Gears
Life cycle
155 Citations (Scopus)

Open controller architecture - Past, present and future

Pritschow, G., Altintas, Y., Jovane, F., Koren, Y., Mitsuishi, M., Takata, S., Van Brussel, H., Weck, M. & Yamazaki, K., 2001, In : CIRP Annals - Manufacturing Technology. 50, 2, p. 463-470 8 p.

Research output: Contribution to journalArticle

Controllers
Control systems
Interoperability
Automation
Testing
Industrial robots
Gears
Life cycle
Wear of materials
Deterioration
2000

Activities of technical committee of life cycle engineering

Takata, S., Umeda, Y. & Onosato, M., 2000 Jun, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 66, 6, p. 851-854 4 p.

Research output: Contribution to journalArticle

Life cycle
8 Citations (Scopus)

Roadmap for life cycle design

Takata, S., Umeda, Y. & Kato, S., 2000 Dec, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 66, 12, p. 1853-1857 5 p.

Research output: Contribution to journalArticle

Life cycle
Ecodesign
1999
4 Citations (Scopus)

Computer-aided facility life cycle management

Takata, S., Yamada, A. & Inoue, Y., 1999 Jan 1, Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999. Institute of Electrical and Electronics Engineers Inc., p. 856-861 6 p. 747728

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Life cycle
Information management
Railroad cars
Aging of materials
Personnel
2 Citations (Scopus)

Disturbance analysis using a system bond-graph model

Kohda, T., Inoue, K., Takata, S. & Asama, H., 1999, Proceedings of the Annual Reliability and Maintainability Symposium. IEEE, p. 358-364 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow control
Control systems
Water
2 Citations (Scopus)

Life Cycle Maintenance

Takata, S., 1999 Jan 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 3, p. 349-355 7 p.

Research output: Contribution to journalArticle

Failure analysis
Life cycle
13 Citations (Scopus)

Maintenance data management system

Takata, S., Inoue, Y., Kohda, T., Hiraoka, H. & Asama, H., 1999, In : CIRP Annals - Manufacturing Technology. 48, 1, p. 389-392 4 p.

Research output: Contribution to journalArticle

Information management
Machine tools
Life cycle
Feedback
Planning
Information management
Life cycle
Feedback
Maintainability
Deterioration
1998

FA system in network age

Takata, S., 1998, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 64, 1, p. 23-26 4 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Life cycle simulation applied to a robot manipulator - An example of aging simulation of manufacturing facilities

Takata, S., Yamada, A., Kohda, T. & Asama, H., 1998, In : CIRP Annals - Manufacturing Technology. 47, 1, p. 397-x76

Research output: Contribution to journalArticle

Manipulators
Life cycle
Aging of materials
Robots
Bearings (structural)
1997
6 Citations (Scopus)

Case-based evaluation of potential deterioration for facility life-cycle management

Takata, S., Shiono, H., Hiraoka, H. & Asama, H., 1997, In : CIRP Annals - Manufacturing Technology. 46, 1

Research output: Contribution to journalArticle

Deterioration
Life cycle
Planning