If you made any changes in Pure these will be visible here soon.

Research Output 1982 2019

Filter
Conference contribution
2015
1 Citation (Scopus)

Module-based renewal planning of energy using products for reducing environmental load and life cycle cost

Iijima, H., Yoshida, S. & Takata, S., 2015, Procedia CIRP. Elsevier, Vol. 29. p. 162-167 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Life cycle
Planning
Costs
Air conditioning
Energy utilization
2013
4 Citations (Scopus)

Maintenance-centered circular manufacturing

Takata, S., 2013, Procedia CIRP. Vol. 11. p. 23-31 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Desulfurization
Air conditioning
Restoration
Life cycle
Actuators
2 Citations (Scopus)

Module reconfiguration management for circular factories without discriminating between virgin and reused products

Urano, K. & Takata, S., 2013, Re-Engineering Manufacturing for Sustainability - Proceedings of the 20th CIRP International Conference on Life Cycle Engineering. Springer-Verlag Berlin Heidelberg, p. 603-608 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Industrial plants
Costs
Life cycle
Industry
2011
1 Citation (Scopus)

Systematic categorization of reuse and identification of issues in reuse management in the closed loop manufacturing

Sakai, T. & Takata, S., 2011, Glocalized Solutions for Sustainability in Manufacturing - Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. p. 425-430 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copying
Sales
Industry
2009
1 Citation (Scopus)

Life cycle maintenance planning system in consideration of operation and maintenance integration

Tsutsui, M. & Takata, S., 2009, Engineering Asset Lifecycle Management - Proceedings of the 4th World Congress on Engineering Asset Management, WCEAM 2009. p. 316-325 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Life cycle
Planning
Heating furnaces
Desulfurization
Costs
2007
4 Citations (Scopus)

Module-based model change planning for improving reusability in consideration of customer satisfaction

Tsubouchi, K. & Takata, S., 2007, Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses - Proceedings of the 14th CIRP Conference on Life Cycle Engineering. p. 11-16 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Customer satisfaction
Reusability
Planning
Copying
2005
1 Citation (Scopus)

Module-based model change planning in consideration of environmental impact and customer satisfaction

Watanabe, M. & Takata, S., 2005, Proceedings - Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005. Vol. 2005. p. 170-176 7 p. 1619195

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copying
Customer satisfaction
Reusability
Environmental impact
Planning
2001
4 Citations (Scopus)

Life cycle management of industrial robots based on deterioration evaluation - Facility layout and motion planning taking account of joint gear wear

Yamada, A. & Takata, S., 2001, Proceedings - 2nd International Symposium on Environmentally Conscious Design and Inverse Manufacturing. Institute of Electrical and Electronics Engineers Inc., p. 460-465 6 p. 992399

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Industrial robots
Motion planning
Deterioration
Gears
Life cycle
1999
4 Citations (Scopus)

Computer-aided facility life cycle management

Takata, S., Yamada, A. & Inoue, Y., 1999 Jan 1, Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999. Institute of Electrical and Electronics Engineers Inc., p. 856-861 6 p. 747728

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Life cycle
Information management
Railroad cars
Aging of materials
Personnel
2 Citations (Scopus)

Disturbance analysis using a system bond-graph model

Kohda, T., Inoue, K., Takata, S. & Asama, H., 1999, Proceedings of the Annual Reliability and Maintainability Symposium. IEEE, p. 358-364 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow control
Control systems
Water
1996
1 Citation (Scopus)

Case based evaluation of component deterioration for facility maintenance

Takata, S., Shiono, H., Hiraoka, H. & Asama, H., 1996, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED. Lavine, A. S., Chandra, U., Chen, M. M., Crowe, C. T., Fritsching, U. & et al, A. (eds.). New York, NY, United States: ASME, Vol. 4. p. 563-568 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deterioration
Automation
Planning
1994
5 Citations (Scopus)

Model based NC programming for end milling operations

Takata, S. & Tsai, M. D., 1994, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. New York, NY, United States: ASME, Vol. 68-2. p. 809-818 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling (machining)
Machining
Torque
Simulators
1992
1 Citation (Scopus)

Framework for computer assisted life-cycle maintenance system

Takata, S. & O'Shima, E., 1992, IFAC Symposia Series. 6 ed. Publ by Pergamon Press Inc, p. 451-456 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deterioration
Life cycle
Computer systems
1988

Tool breakage detection by the measurement of spindle rotational speed fluctuation

Takata, S., 1988, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. New York, NY, United States: Publ by American Soc of Mechanical Engineers (ASME), Vol. 33. p. 129-135 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Monitoring
Torque
Tachometers
Pulse generators
Experiments
1986
3 Citations (Scopus)

OPERATION MONITORING OF UNTENDED MANUFACTURING SYSTEMS BY MEANS OF SOUND RECOGNITION.

Sata, T., Takata, S. & Ahn, J. H., 1986, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. New York, NY, USA: ASME (DSC v 4), Vol. 23. p. 279-289 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustic waves
Monitoring
Speech recognition
Machining centers
Printed circuit boards
1984

IDENTIFICATION OF MACHINE AND MACHINING STATES BY USE OF PATTERN RECOGNITION TECHNIQUE.

Sata, T., Kimura, F., Matsushima, K., Takata, S. & Otsuka, J., 1984, Unknown Host Publication Title. Tokyo, Jpn: Japan Soc of Precision Engineering, p. 178-187 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pattern recognition
Machining
Wear of materials
Monitoring
Speech recognition
1982
1 Citation (Scopus)

AUTOMATIC DIAGNOSTIC PROGRAM GENERATOR FOR SEQUENTIALLY CONTROLLED MACHINES.

Takata, S. & Schwager, J., 1982 Aug, Angewandte Informatik, Applied Informatics. 8 ed. Vol. 24. p. 421-429 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Automatic programming
Program diagnostics
Controllers
Microcomputers
Microprocessor chips