If you made any changes in Pure these will be visible here soon.

Research Output 1982 2019

Filter
Article
2019

Life cycle simulation system as an evaluation platform for multitiered circular manufacturing systems

Takata, S., Suemasu, K. & Asai, K., 2019 Jan 1, In : CIRP Annals.

Research output: Contribution to journalArticle

Life cycle
Electric vehicles
Recycling
2018

Process-independent workstation layout for lean automation

Shigematsu, K., Yamazaki, Y., Kato, S., Kojima, F. & Takata, S., 2018 Jan 1, (Accepted/In press) In : CIRP Annals.

Research output: Contribution to journalArticle

Automation
Materials handling equipment
Developing countries
Costs
Personnel
2017

Continuous Improvement of Criteria for Condition-based Maintenance by Means of Effects Evaluation of Treatments

Morimoto, A., Sato, Y. & Takata, S., 2017, In : Procedia CIRP. 61, p. 293-298 6 p.

Research output: Contribution to journalArticle

Sensors
Preventive maintenance
Mechatronics
Deterioration
29 Citations (Scopus)

Design, management and control of demanufacturing and remanufacturing systems

Tolio, T., Bernard, A., Colledani, M., Kara, S., Seliger, G., Duflou, J., Battaia, O. & Takata, S., 2017, In : CIRP Annals - Manufacturing Technology. 66, 2, p. 585-609 25 p.

Research output: Contribution to journalArticle

Sustainable development
Automobile electronic equipment
Consumer products
Mechatronics
Industrial wastes
5 Citations (Scopus)

Design method of material handling systems for lean automation-Integrating equipment for reducing wasted waiting time

Yamazaki, Y., Shigematsu, K., Kato, S., Kojima, F., Onari, H. & Takata, S., 2017, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Materials handling
Automation
Materials handling equipment
Cost reduction
Costs

Determination of Optimum Criteria for Condition-based Maintenance of Automatic Ticket Gates Using Remote Monitoring Data

Sato, Y., Morimoto, A. & Takata, S., 2017, In : Procedia CIRP. 59, p. 190-195 6 p.

Research output: Contribution to journalArticle

Preventive maintenance
Mechatronics
Deterioration
Monitoring
Functional analysis
2016
3 Citations (Scopus)

Condition based renewal and maintenance integrated planning

Iijima, H. & Takata, S., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Life cycle
Planning
Air conditioning
Monitoring
Costs
81 Citations (Scopus)

Continuous maintenance and the future - Foundations and technological challenges

Roy, R., Stark, R., Tracht, K., Takata, S. & Mori, M., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Life cycle
Costs
Visualization
Degradation
Industry
5 Citations (Scopus)

Lean Automation System Responding to the Changing Market

Yamazaki, Y., Takata, S., Onari, H., Kojima, F. & Kato, S., 2016, In : Procedia CIRP. 57, p. 201-206 6 p.

Research output: Contribution to journalArticle

Automation
Information technology
Engines
Costs
Industry

Service Selection Method for Facilitating Life Cycle Options in Environmentally Benign Product and Service Business

Matsumura, J., Dairokuno, Y. & Takata, S., 2016, In : Unknown Journal. 48, p. 90-95 6 p.

Research output: Contribution to journalArticle

Life cycle
cycles
products
Industry
2013
10 Citations (Scopus)

BOM based supply chain risk management

Takata, S. & Yamanaka, M., 2013, In : CIRP Annals - Manufacturing Technology. 62, 1, p. 479-482 4 p.

Research output: Contribution to journalArticle

Supply chain management
Risk management
Supply chains
Hard disk storage
Disasters
2012
3 Citations (Scopus)

Analysis of key success factors for eco-business through case studies in Japan

Kondoh, S., Kurakawa, K., Kato, S., Umeda, Y. & Takata, S., 2012 May, In : International Journal of Automation Technology. 6, 3, p. 252-263 12 p.

Research output: Contribution to journalArticle

Industry
Planning
Costs
9 Citations (Scopus)

Life cycle maintenance planning method in consideration of operation and maintenance integration

Tsutsui, M. & Takata, S., 2012 Feb, In : Production Planning and Control. 23, 2-3, p. 183-193 11 p.

Research output: Contribution to journalArticle

Life cycle
Planning
Heating furnaces
Costs
Repair
12 Citations (Scopus)

Reconfiguration management of remanufactured products for responding to varied user needs

Sakai, T. & Takata, S., 2012, In : CIRP Annals - Manufacturing Technology. 61, 1, p. 21-26 6 p.

Research output: Contribution to journalArticle

Life cycle
Sales
Costs
Industry
101 Citations (Scopus)

Toward integrated product and process life cycle planning - An environmental perspective

Umeda, Y., Takata, S., Kimura, F., Tomiyama, T., Sutherland, J. W., Kara, S., Herrmann, C. & Duflou, J. R., 2012, In : CIRP Annals - Manufacturing Technology. 61, 2, p. 681-702 22 p.

Research output: Contribution to journalArticle

Life cycle
Planning
2011
40 Citations (Scopus)

Human and robot allocation method for hybrid assembly systems

Takata, S. & Hirano, T., 2011, In : CIRP Annals - Manufacturing Technology. 60, 1, p. 9-12 4 p.

Research output: Contribution to journalArticle

Robots
Costs
Personnel
Planning
Industry
2010
Engineering research
Sustainable development
Life cycle
2009
2 Citations (Scopus)

Exhausting lifetime by multitiered reuse with forced circulation in closed-loop manufacturing

Takata, S., Tsubouchi, K. & Yoshijima, S., 2009, In : International Journal of Sustainable Manufacturing. 1, 4, p. 450-462 13 p.

Research output: Contribution to journalArticle

manufacturing
Photoconducting materials
Life cycle
compulsion
life cycle
4 Citations (Scopus)

Maximizing utilization rate of office automation equipment by intraoffice circulation

Takata, S. & Tsubouchi, K., 2009, In : CIRP Annals - Manufacturing Technology. 58, 1, p. 33-36 4 p.

Research output: Contribution to journalArticle

Office automation
Genetic algorithms
2007

Preface

Takata, S., 2007, In : Unknown Journal.

Research output: Contribution to journalArticle

2005

Toward design support technologies for environmentally conscious businesses

Umeda, Y., Takata, S., Kondoh, S., Kurakawa, K. & Kato, S., 2005, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 71, 10, p. 1214-1218 5 p.

Research output: Contribution to journalArticle

Industry
2004
217 Citations (Scopus)

Maintenance: Changing role in life cycle management

Takata, S., Kimura, F., Van Houten, F. J. A. M., Westkämper, E., Shpitalni, M., Ceglarek, D. & Lee, J., 2004, In : CIRP Annals - Manufacturing Technology. 53, 2, p. 643-655 13 p.

Research output: Contribution to journalArticle

Life cycle
Energy utilization
2003
29 Citations (Scopus)

Life cycle simulation system for life cycle process planning

Takata, S. & Kimura, T., 2003, In : CIRP Annals - Manufacturing Technology. 52, 1, p. 37-40 4 p.

Research output: Contribution to journalArticle

Process planning
Life cycle
Product design
2002

Operation planning of industrial robots based on deterioration simulation

Translated title of the contribution: Operation planning of industrial robots based on deterioration simulationYamada, A., Yamamoto, R. & Takata, S., 2002 Jan, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 1, p. 53-57 5 p.

Research output: Contribution to journalArticle

Industrial robots
Deterioration
Life cycle
Planning
Robots
42 Citations (Scopus)

Real-time drill wear estimation based on spindle motor power

Kim, H. Y., Ahn, J. H., Kim, S. H. & Takata, S., 2002, In : Journal of Materials Processing Technology. 124, 3, p. 267-273 7 p., 5736.

Research output: Contribution to journalArticle

Drilling
Wear of materials
Real-time
Process Model
Torque
25 Citations (Scopus)
Industrial robots
Deterioration
Robots
Simulated annealing
Gears
2001
15 Citations (Scopus)

Disassembly operation support system with motion monitoring of a human operator

Takata, S., Isobe, H. & Fujii, H., 2001, In : CIRP Annals - Manufacturing Technology. 50, 1, p. 305-308 4 p.

Research output: Contribution to journalArticle

Copying
Monitoring
Sensors
Mathematical operators
Recycling
155 Citations (Scopus)

Open controller architecture - Past, present and future

Pritschow, G., Altintas, Y., Jovane, F., Koren, Y., Mitsuishi, M., Takata, S., Van Brussel, H., Weck, M. & Yamazaki, K., 2001, In : CIRP Annals - Manufacturing Technology. 50, 2, p. 463-470 8 p.

Research output: Contribution to journalArticle

Controllers
Control systems
Interoperability
Automation
Testing
Industrial robots
Gears
Life cycle
Wear of materials
Deterioration
2000

Activities of technical committee of life cycle engineering

Takata, S., Umeda, Y. & Onosato, M., 2000 Jun, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 66, 6, p. 851-854 4 p.

Research output: Contribution to journalArticle

Life cycle
8 Citations (Scopus)

Roadmap for life cycle design

Takata, S., Umeda, Y. & Kato, S., 2000 Dec, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 66, 12, p. 1853-1857 5 p.

Research output: Contribution to journalArticle

Life cycle
Ecodesign
1999
2 Citations (Scopus)

Life Cycle Maintenance

Takata, S., 1999 Jan 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 3, p. 349-355 7 p.

Research output: Contribution to journalArticle

Failure analysis
Life cycle
13 Citations (Scopus)

Maintenance data management system

Takata, S., Inoue, Y., Kohda, T., Hiraoka, H. & Asama, H., 1999, In : CIRP Annals - Manufacturing Technology. 48, 1, p. 389-392 4 p.

Research output: Contribution to journalArticle

Information management
Machine tools
Life cycle
Feedback
Planning
Information management
Life cycle
Feedback
Maintainability
Deterioration
1998

FA system in network age

Takata, S., 1998, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 64, 1, p. 23-26 4 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Life cycle simulation applied to a robot manipulator - An example of aging simulation of manufacturing facilities

Takata, S., Yamada, A., Kohda, T. & Asama, H., 1998, In : CIRP Annals - Manufacturing Technology. 47, 1, p. 397-x76

Research output: Contribution to journalArticle

Manipulators
Life cycle
Aging of materials
Robots
Bearings (structural)
1997
6 Citations (Scopus)

Case-based evaluation of potential deterioration for facility life-cycle management

Takata, S., Shiono, H., Hiraoka, H. & Asama, H., 1997, In : CIRP Annals - Manufacturing Technology. 46, 1

Research output: Contribution to journalArticle

Deterioration
Life cycle
Planning

Open FA controllers

Takata, S., 1997, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 63, 5, p. 621-624 4 p.

Research output: Contribution to journalArticle

Programmable logic controllers
Controllers
1995
19 Citations (Scopus)

Facility Model for Life-Cycle Maintenance System

Takata, S., Hiraoka, H., Asama, H., Yamaoka, N. & Saito, D., 1995, In : CIRP Annals - Manufacturing Technology. 44, 1, p. 117-121 5 p.

Research output: Contribution to journalArticle

Life cycle
Deterioration
6 Citations (Scopus)
Experiments
Geometry
1 Citation (Scopus)

Reliability evaluation of manipulators by means of probability of task achievement

Kotosaka, S., Takata, S., Kohda, T., Asama, H., Hiraoka, H., Matsumoto, A. & Endo, I., 1995 May, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 61, 5, p. 717-721 5 p.

Research output: Contribution to journalArticle

Manipulators
Redundancy
Inspection
1 Citation (Scopus)

Task-oriented structural design of manipulators based on operability evaluation

Kotosaka, S., Asama, H., Takata, S., Hiraoka, H., Kohda, T., Matsumoto, A. & Endo, I., 1995 Sep, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 61, 9, p. 1265-1269 5 p.

Research output: Contribution to journalArticle

Structural design
Manipulators
Jacobian matrices
Welding
Genetic algorithms
1994
4 Citations (Scopus)

Machining process/tool wear monitoring system based on real-time sound recognition

Ahn, J. H., Lim, H. S., Takata, S. & Sata, T., 1994 Aug, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 60, 8, p. 1144-1148 5 p.

Research output: Contribution to journalArticle

Machining
Wear of materials
Acoustic waves
Monitoring
Filter banks
1993
36 Citations (Scopus)
Machining
Data structures
Geometry
Monitoring
Experiments
1991
52 Citations (Scopus)

Operation Planning Based on Cutting Process Models

Tsai, M. D., Takata, S., Inui, M., Kimura, F. & Sata, T., 1991, In : CIRP Annals - Manufacturing Technology. 40, 1, p. 95-98 4 p.

Research output: Contribution to journalArticle

Planning
Milling (machining)
Machining
Torque
Metals
1 Citation (Scopus)

Self-diagnosis and Self-recovery

Takata, S., 1991, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 57, 12, p. 2123-2126 4 p.

Research output: Contribution to journalArticle

Fault tolerance
Redundancy
Recovery
1990
37 Citations (Scopus)

Prediction of Chatter Vibration by Means of a Model-Based Cutting Simulation System

Tsai, M. D., Takata, S., Inui, M., Kimura, F. & Sata, T., 1990, In : CIRP Annals - Manufacturing Technology. 39, 1, p. 447-450 4 p.

Research output: Contribution to journalArticle

Milling (machining)
Stability criteria
Computer simulation
Experiments
1989
77 Citations (Scopus)

A Cutting Simulation System for Machinability Evaluation Using a Workpiece Model

Takata, S., Tsai, M. D., Inui, M. & Sata, T., 1989, In : CIRP Annals - Manufacturing Technology. 38, 1, p. 417-420 4 p.

Research output: Contribution to journalArticle

Machinability
Machining
Experiments
1987
3 Citations (Scopus)

Functions required for advanced flexible manufacturing systems

Sata, T., Hiraoka, H., Miki, M. & Takata, S., 1987, In : Robotics and Computer Integrated Manufacturing. 3, 4, p. 417-421 5 p.

Research output: Contribution to journalArticle

Flexible Manufacturing Systems
Flexible manufacturing systems
Process monitoring
Machining
Control systems
16 Citations (Scopus)

Tool Breakage Monitoring by Means of Fluctuations in Spindle Rotational Speed

Takata, S., Nakajima, T., Ahn, J. H. & Sata, T., 1987, In : CIRP Annals - Manufacturing Technology. 36, 1, p. 49-52 4 p.

Research output: Contribution to journalArticle

Monitoring
Tachometers
Pulse generators
Torque
Experiments