3-D Assembly Methods to Fabricate Multi-Metal Electrodes Implanted PDMS Structures for Micro Flow Devices

Masanori Ishizuka, Masaaki Abe, Hiroaki Houjou, Jun Mizuno, Shuichi Shoji

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Prototype of metal electrodes implanted PDMS microchannel to control the 3 D electric field or precise temperature and new fabrication method were proposed. Our tentative goal is to fabricate a PDMS microchannel which has vertical and horizontal electrodes pairs. Accurate angles of 90 degree between the each electrode are obtained. CYTOP back plates under the metal electrodes were employed due to the residual stress. The CYTOP was worked as the protection layer from photolithography process containing organic solvent. The proposed micro channel consists of the single electrode implanted PDMS substrate and three electrodes of upper and both side implanted cover PDMS structure. We develop novel assembly method starting with three electrodes installed planar PDMS in order to form the 3 D microstructures.

Original languageEnglish
Pages (from-to)393-397
Number of pages5
JournalIEEJ Transactions on Sensors and Micromachines
Volume125
Issue number9
DOIs
Publication statusPublished - 2006

Fingerprint

Electrodes
Metals
Microchannels
Photolithography
Organic solvents
Residual stresses
Electric fields
Fabrication
Microstructure
Substrates
Temperature

Keywords

  • 3D assembly
  • metal electrode implanted
  • micro channel
  • micro flow device
  • PDMS

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering

Cite this

3-D Assembly Methods to Fabricate Multi-Metal Electrodes Implanted PDMS Structures for Micro Flow Devices. / Ishizuka, Masanori; Abe, Masaaki; Houjou, Hiroaki; Mizuno, Jun; Shoji, Shuichi.

In: IEEJ Transactions on Sensors and Micromachines, Vol. 125, No. 9, 2006, p. 393-397.

Research output: Contribution to journalArticle

@article{84bea1c594b74a75b7dc7bfaf81910ba,
title = "3-D Assembly Methods to Fabricate Multi-Metal Electrodes Implanted PDMS Structures for Micro Flow Devices",
abstract = "Prototype of metal electrodes implanted PDMS microchannel to control the 3 D electric field or precise temperature and new fabrication method were proposed. Our tentative goal is to fabricate a PDMS microchannel which has vertical and horizontal electrodes pairs. Accurate angles of 90 degree between the each electrode are obtained. CYTOP back plates under the metal electrodes were employed due to the residual stress. The CYTOP was worked as the protection layer from photolithography process containing organic solvent. The proposed micro channel consists of the single electrode implanted PDMS substrate and three electrodes of upper and both side implanted cover PDMS structure. We develop novel assembly method starting with three electrodes installed planar PDMS in order to form the 3 D microstructures.",
keywords = "3D assembly, metal electrode implanted, micro channel, micro flow device, PDMS",
author = "Masanori Ishizuka and Masaaki Abe and Hiroaki Houjou and Jun Mizuno and Shuichi Shoji",
year = "2006",
doi = "10.1541/ieejsmas.125.393",
language = "English",
volume = "125",
pages = "393--397",
journal = "IEEJ Transactions on Sensors and Micromachines",
issn = "1341-8939",
publisher = "The Institute of Electrical Engineers of Japan",
number = "9",

}

TY - JOUR

T1 - 3-D Assembly Methods to Fabricate Multi-Metal Electrodes Implanted PDMS Structures for Micro Flow Devices

AU - Ishizuka, Masanori

AU - Abe, Masaaki

AU - Houjou, Hiroaki

AU - Mizuno, Jun

AU - Shoji, Shuichi

PY - 2006

Y1 - 2006

N2 - Prototype of metal electrodes implanted PDMS microchannel to control the 3 D electric field or precise temperature and new fabrication method were proposed. Our tentative goal is to fabricate a PDMS microchannel which has vertical and horizontal electrodes pairs. Accurate angles of 90 degree between the each electrode are obtained. CYTOP back plates under the metal electrodes were employed due to the residual stress. The CYTOP was worked as the protection layer from photolithography process containing organic solvent. The proposed micro channel consists of the single electrode implanted PDMS substrate and three electrodes of upper and both side implanted cover PDMS structure. We develop novel assembly method starting with three electrodes installed planar PDMS in order to form the 3 D microstructures.

AB - Prototype of metal electrodes implanted PDMS microchannel to control the 3 D electric field or precise temperature and new fabrication method were proposed. Our tentative goal is to fabricate a PDMS microchannel which has vertical and horizontal electrodes pairs. Accurate angles of 90 degree between the each electrode are obtained. CYTOP back plates under the metal electrodes were employed due to the residual stress. The CYTOP was worked as the protection layer from photolithography process containing organic solvent. The proposed micro channel consists of the single electrode implanted PDMS substrate and three electrodes of upper and both side implanted cover PDMS structure. We develop novel assembly method starting with three electrodes installed planar PDMS in order to form the 3 D microstructures.

KW - 3D assembly

KW - metal electrode implanted

KW - micro channel

KW - micro flow device

KW - PDMS

UR - http://www.scopus.com/inward/record.url?scp=85009636891&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85009636891&partnerID=8YFLogxK

U2 - 10.1541/ieejsmas.125.393

DO - 10.1541/ieejsmas.125.393

M3 - Article

AN - SCOPUS:85009636891

VL - 125

SP - 393

EP - 397

JO - IEEJ Transactions on Sensors and Micromachines

JF - IEEJ Transactions on Sensors and Micromachines

SN - 1341-8939

IS - 9

ER -