300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface

S. Hara, K. Takano, Kosuke Katayama, R. Dong, K. Mizuno, K. Takahashi, I. Watanabe, N. Sekine, A. Kasamatsu, T. Yoshida, S. Amakawa, M. Fujishima

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

A 300-GHz CMOS receiver module with a WR-3.4 waveguide interface is presented. The CMOS receiver is flip-chip mounted on a low-cost multilayered glass epoxy printed circuit board (PCB). A transmission-line-to-waveguide transition with a back-short structure is built into the PCB. The measured conversion gain, noise figure, and 3-dB bandwidth of the receiver module are approximately -23.7 dB, 33 dB and 18.4 GHz, respectively. Packaging loss is estimated to be approximately 4 dB from the conversion gain of the CMOS chip of -19.5 dB. A wireless data rate of 20 Gbit/s with 16-QAM was achieved using the designed modules.

Original languageEnglish
Title of host publication2018 48th European Microwave Conference, EuMC 2018
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages396-399
Number of pages4
ISBN (Electronic)9782874870514
DOIs
Publication statusPublished - 2018 Nov 20
Externally publishedYes
Event48th European Microwave Conference, EuMC 2018 - Madrid, Spain
Duration: 2018 Sep 252018 Sep 27

Other

Other48th European Microwave Conference, EuMC 2018
CountrySpain
CityMadrid
Period18/9/2518/9/27

Fingerprint

Printed circuit boards
CMOS
Waveguides
receivers
modules
printed circuits
circuit boards
waveguides
Quadrature amplitude modulation
Noise figure
chips
Electric lines
Packaging
quadrature amplitude modulation
Bandwidth
packaging
Glass
transmission lines
bandwidth
Costs

Keywords

  • 300-GHz band
  • CMOS
  • receiver module
  • terahertz wave
  • waveguide transition

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Instrumentation
  • Radiation

Cite this

Hara, S., Takano, K., Katayama, K., Dong, R., Mizuno, K., Takahashi, K., ... Fujishima, M. (2018). 300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface. In 2018 48th European Microwave Conference, EuMC 2018 (pp. 396-399). [8541693] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.23919/EuMC.2018.8541693

300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface. / Hara, S.; Takano, K.; Katayama, Kosuke; Dong, R.; Mizuno, K.; Takahashi, K.; Watanabe, I.; Sekine, N.; Kasamatsu, A.; Yoshida, T.; Amakawa, S.; Fujishima, M.

2018 48th European Microwave Conference, EuMC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 396-399 8541693.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hara, S, Takano, K, Katayama, K, Dong, R, Mizuno, K, Takahashi, K, Watanabe, I, Sekine, N, Kasamatsu, A, Yoshida, T, Amakawa, S & Fujishima, M 2018, 300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface. in 2018 48th European Microwave Conference, EuMC 2018., 8541693, Institute of Electrical and Electronics Engineers Inc., pp. 396-399, 48th European Microwave Conference, EuMC 2018, Madrid, Spain, 18/9/25. https://doi.org/10.23919/EuMC.2018.8541693
Hara S, Takano K, Katayama K, Dong R, Mizuno K, Takahashi K et al. 300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface. In 2018 48th European Microwave Conference, EuMC 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 396-399. 8541693 https://doi.org/10.23919/EuMC.2018.8541693
Hara, S. ; Takano, K. ; Katayama, Kosuke ; Dong, R. ; Mizuno, K. ; Takahashi, K. ; Watanabe, I. ; Sekine, N. ; Kasamatsu, A. ; Yoshida, T. ; Amakawa, S. ; Fujishima, M. / 300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface. 2018 48th European Microwave Conference, EuMC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 396-399
@inproceedings{1b2565fbe9e04909b32f6aba7807f496,
title = "300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface",
abstract = "A 300-GHz CMOS receiver module with a WR-3.4 waveguide interface is presented. The CMOS receiver is flip-chip mounted on a low-cost multilayered glass epoxy printed circuit board (PCB). A transmission-line-to-waveguide transition with a back-short structure is built into the PCB. The measured conversion gain, noise figure, and 3-dB bandwidth of the receiver module are approximately -23.7 dB, 33 dB and 18.4 GHz, respectively. Packaging loss is estimated to be approximately 4 dB from the conversion gain of the CMOS chip of -19.5 dB. A wireless data rate of 20 Gbit/s with 16-QAM was achieved using the designed modules.",
keywords = "300-GHz band, CMOS, receiver module, terahertz wave, waveguide transition",
author = "S. Hara and K. Takano and Kosuke Katayama and R. Dong and K. Mizuno and K. Takahashi and I. Watanabe and N. Sekine and A. Kasamatsu and T. Yoshida and S. Amakawa and M. Fujishima",
year = "2018",
month = "11",
day = "20",
doi = "10.23919/EuMC.2018.8541693",
language = "English",
pages = "396--399",
booktitle = "2018 48th European Microwave Conference, EuMC 2018",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - 300-GHz CMOS Receiver Module with WR-3.4 Waveguide Interface

AU - Hara, S.

AU - Takano, K.

AU - Katayama, Kosuke

AU - Dong, R.

AU - Mizuno, K.

AU - Takahashi, K.

AU - Watanabe, I.

AU - Sekine, N.

AU - Kasamatsu, A.

AU - Yoshida, T.

AU - Amakawa, S.

AU - Fujishima, M.

PY - 2018/11/20

Y1 - 2018/11/20

N2 - A 300-GHz CMOS receiver module with a WR-3.4 waveguide interface is presented. The CMOS receiver is flip-chip mounted on a low-cost multilayered glass epoxy printed circuit board (PCB). A transmission-line-to-waveguide transition with a back-short structure is built into the PCB. The measured conversion gain, noise figure, and 3-dB bandwidth of the receiver module are approximately -23.7 dB, 33 dB and 18.4 GHz, respectively. Packaging loss is estimated to be approximately 4 dB from the conversion gain of the CMOS chip of -19.5 dB. A wireless data rate of 20 Gbit/s with 16-QAM was achieved using the designed modules.

AB - A 300-GHz CMOS receiver module with a WR-3.4 waveguide interface is presented. The CMOS receiver is flip-chip mounted on a low-cost multilayered glass epoxy printed circuit board (PCB). A transmission-line-to-waveguide transition with a back-short structure is built into the PCB. The measured conversion gain, noise figure, and 3-dB bandwidth of the receiver module are approximately -23.7 dB, 33 dB and 18.4 GHz, respectively. Packaging loss is estimated to be approximately 4 dB from the conversion gain of the CMOS chip of -19.5 dB. A wireless data rate of 20 Gbit/s with 16-QAM was achieved using the designed modules.

KW - 300-GHz band

KW - CMOS

KW - receiver module

KW - terahertz wave

KW - waveguide transition

UR - http://www.scopus.com/inward/record.url?scp=85059807640&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85059807640&partnerID=8YFLogxK

U2 - 10.23919/EuMC.2018.8541693

DO - 10.23919/EuMC.2018.8541693

M3 - Conference contribution

SP - 396

EP - 399

BT - 2018 48th European Microwave Conference, EuMC 2018

PB - Institute of Electrical and Electronics Engineers Inc.

ER -