Find Research outputs

Search results

• Conference contribution

  Study on ideological and political education on the condition of network

  Di, Z., 2011 Dec 1, ITME 2011 - Proceedings: 2011 IEEE International Symposium on IT in Medicine and Education. p. 439-441 3 p. 6132143. (ITME 2011 - Proceedings: 2011 IEEE International Symposium on IT in Medicine and Education; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Improvement of Estimation Accuracy in Pose Estimation Model Using Time Series Correlation

  Yamakawa, A., Ishikawa, T. & Watanabe, H., 2020 Oct 13, 2020 IEEE 9th Global Conference on Consumer Electronics, GCCE 2020. Institute of Electrical and Electronics Engineers Inc., p. 409-412 4 p. 9291962. (2020 IEEE 9th Global Conference on Consumer Electronics, GCCE 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on in-plane and out-of-plane deformation considering elastic plasticity of membrane

  Torisaka, A., Ogawa, K., Miura, S., Parque, V., Miyashita, T. & Yamakawa, H., 2019 Jan 1, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on Japanese driver eye position

  Ishida, T. & Matsuno, M., 1975, SAE Technical Papers.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on learning effect by active manipulation using tangible solar system teaching equipment

  Setozaki, N., Iwasaki, T. & Morita, Y., 2010, Proceedings of the 18th International Conference on Computers in Education: Enhancing and Sustaining New Knowledge Through the Use of Digital Technology in Education, ICCE 2010. p. 211-213 3 p. (Proceedings of the 18th International Conference on Computers in Education: Enhancing and Sustaining New Knowledge Through the Use of Digital Technology in Education, ICCE 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on maximization method of output density for an induction motor

  Shiraki, N. & Kondo, K., 2013 Dec 1, 2013 International Conference on Electrical Machines and Systems, ICEMS 2013. p. 2006-2011 6 p. 6713169. (2013 International Conference on Electrical Machines and Systems, ICEMS 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on method for protecting speech privacy by actively controlling speech transmission index in simulated room

  Unoki, M., Kashihara, Y., Kobayashi, M. & Akagi, M., 2018 Feb 5, Proceedings - 9th Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2017. Institute of Electrical and Electronics Engineers Inc., p. 1199-1204 6 p. (Proceedings - 9th Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2017; vol. 2018-February).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on method to simulate light propagation on tissue with characteristics of radial-beam LED based on Monte-carlo method

  Song, S., Elgezua, I., Kobayashi, Y. & Fujie, M. G., 2013, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. p. 25-28 4 p. 6609428

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on Microcontroller Board Design Planning for Design Education

  Nam, W. & Choh, I., 2019 Jul, Proceedings of the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019, ICKII 2019. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 557-560 4 p. 9042667. (Proceedings of the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019, ICKII 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on multi-Path transmission model based on P2P overlay networks for streaming data

  Jing, G., Tsuchiya, T., Sawano, H., Kugimoto, T., Sebayashi, K., Akashi, O., Maruyama, M. & Koyanagi, K., 2009 Nov 4, Proceedings - 2009 9th Annual International Symposium on Applications and the Internet, SAINT 2009. p. 271-274 4 p. 5230780. (Proceedings - 2009 9th Annual International Symposium on Applications and the Internet, SAINT 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on optimal operational planning of Advanced Co-generation system in consideration of annual demand analysis

  Tomizawa, M., Takeshita, K., Akita, T., Amano, Y. & Hashizume, T., 2005 Nov 21, Proceedings of the ASME Power Conference, 2005: Includes Papers from the 2005 International Conference on Power Engineering, ICOPE. p. 1491-1495 5 p. PWR2005-50373. (Proceedings of the ASME Power Conference, 2005; vol. PART B).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on optimal operational planning of an advanced co-generation system on a hotel's energy demand

  Tomizawa, M., Amano, Y. & Hashizume, T., 2007, Energy and Sustainability. WITPress, Vol. 105. p. 333-342 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on optimum connecting points of boom-membrane structure as a basic model for larger lightweight space structure

  Torisaka, A., Sato, Y., Natori, M. C., Akita, T., Yamakawa, H. & Kobayashi, N., 2013, ICAST 2013 - 24th International Conference on Adaptive Structures and Technologies. International Conference on Adaptive Structures and Technologies, p. 131-142 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on optimum design using fuzzy numbers as design variables

  Arakawa, M. & Yamakawa, H., 1995, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. 1 ed. Vol. 82. p. 463-469 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Study on optimum pre-filtering condition for 42.7 Gbit/s CS-RZ DPSK signal

  Tanaka, K., Morita, I. & Edagawa, N., 2004, Optical Fiber Communication Conference, OFC 2004 - Postconference Digest. p. 410-412 3 p. 1359302. (Conference on Optical Fiber Communication, Technical Digest Series; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on oscillation damping effects of multi-band power system stabilizer arrangement with eigenvalue analysis method

  Liu, F., Ryuichi, Y., Zhou, Y. & Wu, M., 2009, Proceedings of the IASTED International Conference on Modelling, Simulation, and Identification, MSI 2009.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on performance evaluation and maintenance management system of weathering steel bridge

  He, J., Liu, Y. Q., Chen, A. & Yoda, T., 2012, Bridge Maintenance, Safety, Management, Resilience and Sustainability - Proceedings of the Sixth International Conference on Bridge Maintenance, Safety and Management. p. 1288-1294 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on polarization-independent and low-crosstalk operation of InAlGaAs/InAlAs Mach-Zehnder Interferometer type high-speed photonic switch

  Ueda, Y., Nakamura, S., Fujimoto, S., Yamada, H. & Utaka, K., 2008 Nov 26, 2008 Int. Nano-Optoelectronics Workshop, iNOW 2008 in Cooperation With Int. Global-COE Summer School (Photonics Integration-Core Electronics: PICE) and 31st Int. Symposium on Optical Communications. p. 333-334 2 p. 4634569. (2008 Int. Nano-Optoelectronics Workshop, iNOW 2008 in Cooperation With Int. Global-COE Summer School (Photonics Integration-Core Electronics: PICE) and 31st Int. Symposium on Optical Communications).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on predictive control using short-term prediction method based on chaos theory

  Masumoto, N. & Yamakawa, H., 1997, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Fairfield, NJ, United States: ASME, Vol. 95. p. 97-105 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Study on Robust Multi Criteria Decision Making for a Selection Problem

  Shah, H., Murata, T. & Malamura, E., 2017 Jan 1, Proceedings of the International MultiConference of Engineers and Computer Scientists 2017, IMECS 2017. Newswood Limited, Vol. 2228. p. 970-975 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on role of inserted Pt intermediate layer deposited by atomic layer deposition for Cu-Cu quasi-direct bonding

  Yamada, K., Kuwae, H., Kamibayashi, T., Shoji, S., Momose, W. & Mizuno, J., 2019 May, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., p. 41 1 p. 8735244. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on S/N-ratio characteristics by coherent crosstalk of Mach-Zehnder Interferometer-type photonic switch

  Fujimoto, S., Ueda, Y., Nakamura, S., Yamada, H. & Utaka, K., 2008 Nov 26, 2008 Int. Nano-Optoelectronics Workshop, iNOW 2008 in Cooperation With Int. Global-COE Summer School (Photonics Integration-Core Electronics: PICE) and 31st Int. Symposium on Optical Communications. p. 279-280 2 p. 4634544. (2008 Int. Nano-Optoelectronics Workshop, iNOW 2008 in Cooperation With Int. Global-COE Summer School (Photonics Integration-Core Electronics: PICE) and 31st Int. Symposium on Optical Communications).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on safe operation architecture in semi-autonomous remote control system for mobile robots using mobile communications

  Matsuhiro, K., Shinbo, H., Ishii, H. & Takanishi, A., 2022, 2022 IEEE/SICE International Symposium on System Integration, SII 2022. Institute of Electrical and Electronics Engineers Inc., p. 950-956 7 p. (2022 IEEE/SICE International Symposium on System Integration, SII 2022).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on sales engineers of IT companies by means of a dual scaling method

  Imai, S. & Watada, J., 2007, Portland International Conference on Management of Engineering and Technology. p. 2573-2582 10 p. 4349591

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on semi-actively controlled damper for improving microgravity environment

  Watanabe, K. & Yamakawa, H., 2003, 54th International Astronautical Congress of the International Astronautical Federation (IAF), the International Academy of Astronautics and the International Institute of Space Law. Vol. 1. p. 1991-1998 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on semi-actively controlled damper for improving microgravity environment

  Watanabe, K. & Yamakawa, H., 2003, 54th International Astronautical Congress of the International Astronautical Federation (IAF), the International Academy of Astronautics and the International Institute of Space Law. Vol. 2. p. 85-92 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on steel-concrete composite beams under pure negative bending and combined negative bending and torsion

  Lin, W., 2018 Jan 1, IABSE Conference, Kuala Lumpur 2018: Engineering the Developing World - Report. International Association for Bridge and Structural Engineering (IABSE), p. 103-110 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on strength degradation in unidirectional composites, due to time-dependent damage accumulation

  Ogawa, F., Koyanagi, J. & Kawada, H., 2007 Dec 1, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". (ICCM International Conferences on Composite Materials).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on support of learning from examples in problem posing as a production task

  Kojima, K., Miwa, K. & Matsui, T., 2009 Dec 1, Proceedings of the 17th International Conference on Computers in Education, ICCE 2009. p. 75-82 8 p. (Proceedings of the 17th International Conference on Computers in Education, ICCE 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)

• Study on system voltage oscillation and voltage stability control

  Suzuki, Y., Ogahara, R. & Iwamoto, S., 2012, 10th International Power and Energy Conference, IPEC 2012. p. 172-177 6 p. 6523259

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on the applicability of LIBS to sorting

  Togawa, R., Hatano, T. A. & Owada, S., 2015, EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology. International Symposium on East Asian Resources Recycling Technology, p. 730-736 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on the bend performance of package stackable very thin fine pitch ball grid array assemblies with edge and corner bond adhesives

  Shi, H. & Ueda, T., 2011, ICCRD2011 - 2011 3rd International Conference on Computer Research and Development. Vol. 3. p. 421-425 5 p. 5764228

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)

• Study on the bodily communication in the co-creation process and the co-ownership of the 'BA' - measurement of creative action generated by the contradictory induction method (CIM) to the cognition/action system

  Miwa, Y., Shikata, Y. & Sassa, K., 1999, Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. IEEE, Vol. 5.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on the current analysis of a transmission system with wind power penetration using stochastic power flow calculations

  Sakai, A., Hu, Z., Iwamura, K., Nakanishi, Y. & Iba, K., 2017 Feb 8, Proceedings of the 2016 IEEE Region 10 Conference, TENCON 2016. Institute of Electrical and Electronics Engineers Inc., p. 884-887 4 p. 7848132

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on the effects of learning examples through production in problem posing

  Kojima, K., Miwa, K. & Matsui, T., 2011 Dec 1, Proceedings of the 19th International Conference on Computers in Education, ICCE 2011. p. 86-90 5 p. (Proceedings of the 19th International Conference on Computers in Education, ICCE 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on the flow stability and dynamic characteristics of a water bearing

  Zhai, L., Kitauchi, S., Miyagawa, K. & Wang, Z., 2014, 2014 ISFMFE - 6th International Symposium on Fluid Machinery and Fluid Engineering. CP658 ed. Institution of Engineering and Technology, (IET Conference Publications; vol. 2014, no. CP658).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on the frosting phenomena between concavity and convexity plate under forced convection-analysis of frost layer growth

  Kaneko, A., Takano, Y., Miyahara, R., Morita, K. & Katsuta, M., 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, p. 1005-1012 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on the impact tests of a low noise steel bridge with the rubber-latex mortar coating

  Taniguchi, N., Hansaka, M., Kouzuki, T. & Yoda, T., 2009, Proceedings of the 8th International Conference on Shock and Impact Loads on Structures. p. 629-634 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on the PWM methods of the unbalanced input voltage three level inverter with the energy storage device

  Ide, Y., Shimada, A. & Kondo, K., 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011. 6020414. (Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study on the risks of tsunami inundation via underground pipelines

  Takabatake, T. & Shibayama, T., 2018, ASIAN AND PACIFIC COASTS 2017. Cruz, E. C., Suh, K-D. & Tajima, Y. (eds.). 213039 ed. World Scientific Publishing Co. Pte Ltd, p. 268-279 12 p. (Proceedings of the 9th International Conference on APAC 2017; no. 213039).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on the thermal performance of office spaces in the tropics: A case study in Singapore

  Jusuf, S. K., Ichinose, M., Fukawa, Y. & Sutida, S., 2018, PLEA 2018 - Smart and Healthy within the Two-Degree Limit: Proceedings of the 34th International Conference on Passive and Low Energy Architecture. Ng, E., Fong, S. & Ren, C. (eds.). School of Architecture, The Chinese University of Hong Kong, p. 403-408 6 p. (PLEA 2018 - Smart and Healthy within the Two-Degree Limit: Proceedings of the 34th International Conference on Passive and Low Energy Architecture; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on the walking support machine indoors by assisting whole legs

  Tanaka, E., Ikehara, T., Nagamura, K., Ikejo, K., Sakamoto, T., Inoue, Y. & Saegusa, S., 2008 Jun 17, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 597-605 9 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 8 PART A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on topological optimization of structure using Cantor function as teaching function

  Arakawa, M., Ohkubo, N. & Yamakawa, H., 1995, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Gadh, R. (ed.). 2 Pt 2 ed. New York, NY, United States: ASME, Vol. 83. p. 733-738 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on transition of elderly people's reactions in robot therapy

  Hamada, T., Naganuma, M., Kagawa, Y., Hashimoto, T., Onari, H. & Yoneoka, T., 2016 Apr 12, HRI 2016 - 11th ACM/IEEE International Conference on Human Robot Interaction. IEEE Computer Society, Vol. 2016-April. p. 431-432 2 p. 7451791

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Study on trust-based maintenance of overlays in structured P2P systems

  Ding, X. & Koyanagi, K., 2011 Dec 26, 2011 International Conference on Computational Problem-Solving, ICCP 2011. p. 598-603 6 p. 6089940. (2011 International Conference on Computational Problem-Solving, ICCP 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on two-cell rf-deflector cavity for ultra-short electron bunch measurement

  Nishimura, Y., Takahashi, T., Sakaue, K., Washio, M., Takatomi, T. & Urakawa, J., 2013 Dec 24, IPAC 2013: Proceedings of the 4th International Particle Accelerator Conference. p. 2753-2755 3 p. (IPAC 2013: Proceedings of the 4th International Particle Accelerator Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on two-cell rf-deflector cavity for ultra-short electron bunch measurement

  Nishimura, Y., Takahashi, T., Sakaue, K., Washio, M., Takatomi, T. & Urakawa, J., 2013 Jan 1, 2013 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2013. Institute of Electrical and Electronics Engineers Inc., 6829754. (IEEE Nuclear Science Symposium Conference Record).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on upgrade and renewal of transformers using safety-first model of the optimal portfolio selection

  Mori, Y., Nagakawa, Y., Aihara, Y. & Iwamoto, S., 2017 Dec 19, TENCON 2017 - 2017 IEEE Region 10 Conference. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-December. p. 99-104 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on void distribution of a rod bundle with a non-uniform rod gap

  Akiba, M., Morooka, S. & Shirakawa, K., 2005, 4th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 273-278 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Stuffed toys alive! Cuddly robots from fantasy world

  Yamashita, Y., Ishikawa, T., Mitake, H., Takase, Y., Kato, F., Susa, I., Hasegawa, S. & Sato, M., 2012, ACM SIGGRAPH 2012 Posters, SIGGRAPH'12. (ACM SIGGRAPH 2012 Posters, SIGGRAPH'12).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)