Find Research outputs

Search results

• A study on the elongation behaviour of synthetic fibre ropes under cyclic loading

  Asane, D., Schmitz, A., Wang, Y. & Sugano, S., 2020 Oct 24, 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2020. Institute of Electrical and Electronics Engineers Inc., p. 6326-6331 6 p. 9341407. (IEEE International Conference on Intelligent Robots and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on the effects of advertising through the internet

  Fujita, H., Nakashima, K., Nose, T., Kuriyama, S. & Kubo, S., 2003, In: International Journal of Manufacturing Technology and Management. 5, 1-2, p. 62-70 9 p.

  Research output: Contribution to journal › Article › peer-review

• A study on the effect of water intake of umpires during a baseball game in a summer-heat environment

  Kurakake, S., Sugawara, K., Kumae, T., Shimaoka, A., Ooshita, Y., O kamura, N. & Machida, K., 1990, In: Japanese Journal of Hygiene. 44, 6, p. 1120-1127 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on the effect of pressure balance between the second and third land of a piston on engine oil consumption

  Ohno, Y., Kikuhara, K., Ito, A., Inui, M. & Akamatsu, H., 2014, ASME 2014 Internal Combustion Engine Division Fall Technical Conference, ICEF 2014. Web Portal ASME (American Society of Mechanical Engineers), Vol. 2.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on the development of tourist support system using ict and psychological effects

  Sasaki, A., Xiang, F., Hayashi, R., Hiramatsu, Y., Ueda, K., Harada, Y., Hatano, H., Hasegawa, H. & Ito, A., 2020 Dec 2, In: Applied Sciences (Switzerland). 10, 24, p. 1-25 25 p., 8930.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• A study on the development of the new method to evaluate the capacity of physical activity of dialy living in the elderly - Reliability and validity of the field test

  Nagamatsu, T., Arao, T., Oida, Y., Nishijima, Y., Aoki, K. & Ebashi, H., 1992, In: Bulletin of the Physical Fitness Research Institute. 81, p. 11-19 9 p.

  Research output: Contribution to journal › Article › peer-review

• A study on the development of the new method to evaluate the capacity of physical activity of daily living in the elderly - the measurement of sitting up, standing up, and hand working

  Arao, T., Oida, Y., Nagamatsu, T., Aoki, K. & Ebashi, H., 1991, In: Bulletin of the Physical Fitness Research Institute. 78, p. 10-18 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on the development of the new method to evaluate the capacity of physical activity of daily living in the elderly - the measurement of postural stability

  Oida, Y., Nagamatsu, T., Arao, T., Minegishi, Y. & Ebashi, H., 1991, In: Bulletin of the Physical Fitness Research Institute. 78, p. 1-9 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on the development of the new method to evaluate the capacity of physical activity of daily living in the elderly - The examination of stepping test for a field test

  Oida, Y., Nagamatsu, T., Arao, T., Nishijima, Y., Aoki, K. & Ebashi, H., 1992, In: Bulletin of the Physical Fitness Research Institute. 81, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• A study on the development of the new method to evaluate the capacity of physical activity of daily living in the elderly. The measurement of walking

  Nagamatsu, T., Arao, T., Oida, Y. & Ebashi, H., 1991, In: Bulletin of the Physical Fitness Research Institute. 78, p. 19-24 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• A study on the development of the new method to evaluate the capacity of physical activity of daily living in the elderly. Reliability and validity of the rope working test for self-care evaluation

  Maeda, A., Oida, Y., Nishijima, Y., Arao, T., Nagamatsu, T., Aoki, K., Maher, Y., Ebashi, H. & Tsukamoto, H., 1994, In: Bulletin of the Physical Fitness Research Institute. 84, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on the design of deployable cable-panel structure

  Seino, K., Parque, V. & Miyashita, T., 2017, 4th AIAA Spacecraft Structures Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA, (4th AIAA Spacecraft Structures Conference, 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on the design method of the light weight coils for a high power contactless power transfer systems

  Maruyama, T., Yamamoto, K., Kitazawa, S., Kondo, K. & Kashiwagi, T., 2012 Dec 1, ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems. 6401934. (ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  11 Citations (Scopus)

• A study on the design method for the material composition of small particle-size asphalt mixture for controlling cracks in asphalt pavement

  Xin, J., Pei, J., Akiyama, M., Li, R., Zhang, J. & Shao, L., 2019 May 1, In: Applied Sciences (Switzerland). 9, 10, 1988.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)

• A study on the degrees of freedom in an experimental design model based on an orthonormal system

  Ukita, Y., Matsushima, T. & Hirasawa, S., 2013 Feb, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences. E96-A, 2, p. 658-662 5 p.

  Research output: Contribution to journal › Article › peer-review

• A study on the degradation of endocrine disruptors and dioxins by ozonation and advanced oxidation processes

  Nakagawa, S., Kenmochi, Y., Tutumi, K., Tanaka, T. & Hirasawa, I., 2002 Jan 1, In: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN. 35, 9, p. 840-847 8 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• A study on the crystal growth of electroless plated CO-NI-RE-P alloy films for perpendicular magnetic recording

  Koiwa, I., Osaka, T., Yamazaki, Y. & Namikawa, T., 1987 Sep, In: IEEE Transactions on Magnetics. 23, 5, p. 2800-2802 3 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• A Study on the Construction of a Visual Presentation Method That Can Prevent Cognitive Tunneling in Unmanned Construction

  Moteki, T., Qiao, Z., Mizukoshi, Y. & Iwata, H., 2021, Proceedings of the 38th International Symposium on Automation and Robotics in Construction, ISARC 2021. Feng, C., Linner, T. & Brilakis, I. (eds.). International Association for Automation and Robotics in Construction (IAARC), p. 598-604 7 p. (Proceedings of the International Symposium on Automation and Robotics in Construction; vol. 2021-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on the combination of the deities Fudō and Aizen in medieval Shingon esoteric Buddhism

  Trenson, S., 2018 Jan 1, Buddhist Encounters and Identities Across East Asia. Brill Academic Publishers, p. 108-136 29 p. (Dynamics in the History of Religions; vol. 10).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  1 Citation (Scopus)

• A Study on the Collaborative Design using Supervisor System

  Miyashita, T. & Yamakawa, H., 2000, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 66, 643, p. 921-928 8 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• A study on the collaborative design using supervisor system

  Miyashita, T. & Yamakawa, H., 2002 Mar, In: JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing. 45, 1, p. 333-341 9 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• A study on the circuit configuration with capacitors to compensate the power factor for high-power contactless power transformer

  Yamamoto, K., Maruyama, T., Kondo, K. & Kashiwagi, T., 2013 Jan 1, 2013 International Conference on Electrical Machines and Systems, ICEMS 2013. IEEE Computer Society, p. 2233-2238 6 p. 6754555

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• A study on the characteristics of natural gas combustion at a high compression ratio by using a rapid compression and expansion machine

  Kikusato, A., Fukasawa, H., Nomura, K., Kusaka, J. & Daisho, Y., 2012 Jan 1, In: SAE Technical Papers. 9

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• A study on the characteristics of energy consumption for welfare facilities based on the database of energy consumption for commercial buildings (DECC)

  Ikeda, D., Murakawa, S., Nishina, D., Murakami, S., Bogaki, K., Matsunawa, K., Kametani, S., Takaguchi, H., Hanzawa, H., Yoshino, H., Asano, Y., Okumiya, M., Shimoda, Y. & Yoda, H., 2011 Dec, In: Journal of Environmental Engineering. 76, 670, p. 1109-1117 9 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• A study on the application of digital cameras to derive Audio information from the TVs on trains

  Wu, Y. & Shimamoto, S., 2005 Dec 12, p. 161-166. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• A study on the annular leakage-flow-induced vibrations (2nd report, stability analysis and experiments for translationally and rotationally coupled two-degree-of-frccdom systems)

  Li, D. W., Kaneko, S. & Hayama, S., 1999, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 65, 635, p. 2257-2262 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  6 Citations (Scopus)

• A study on the annular leakage-flow-induced vibrations (1st report, stability for translational and rotationalsingle-degree-of-freedom systems)

  Li, D. W., Kaneko, S. & Hayama, S., 1999, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 65, 635, p. 2251-2256 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  8 Citations (Scopus)

• A study on the aged railway steel bridges renewed by hybrid structures

  Taniguchi, N., Lin, W., Hansaka, M., Ohkubo, F., Satake, S. & Sugino, Y., 2015, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. CRC Press/Balkema, p. 746-752 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on tele-nursing method for elderly person based on tracking time and cost for care and assistance by family

  Takayanagi, H., Kawakatsu, C., Shibahara, H., Nakamura, R. & Watanabe, H., 2015 Oct 1, In: AIJ Journal of Technology and Design. 21, 49, p. 1177-1182 6 p.

  Research output: Contribution to journal › Article › peer-review

• A study on supercooling processes of leaf lettuces produced in plant factory

  Thinh, N. Q., Iwamura, K., Shrestha, R., Fukumoto, S., Takematsu, R., Yamaguchi, J. I., Kimura, K., Tanimizu, Y. & Sugimura, N., 2016 Dec 16, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 77-80 4 p. 7790139. (International Symposium on Flexible Automation, ISFA 2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A Study on Structural Optimum Design Based on Qualitative Sensitivities

  Arakawa, M. & Yamakawa, H., 1993, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 59, 558, p. 422-429 8 p.

  Research output: Contribution to journal › Article › peer-review

• A study on stress-corrosion cracking using single fiber model specimen (degradation properties of GFRP caused by water absorption)

  Kawada, H. & Kobiki, A., 2003 Jul, In: JSME International Journal, Series A: Solid Mechanics and Material Engineering. 46, 3, p. 303-307 5 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• A study on stablization of electric power supply under smart grid environment: Utilizing storage function of electric vehicles

  Takeyama, K., Murata, K. & Katayama, H., 2016, CIE 2016: 46th International Conferences on Computers and Industrial Engineering. Computers and Industrial Engineering

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A Study on Speech Enhancement Based on Diffusion Probabilistic Model

  Lu, Y. J., Tsao, Y. & Watanabe, S., 2021, 2021 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 659-666 8 p. (2021 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2021 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on spatial scalable coding using vector representation

  Yamamoto, Y., Kawamura, K. & Watanabe, H., 2006, 2006 IEEE International Conference on Multimedia and Expo, ICME 2006 - Proceedings. p. 145-148 4 p. 4036557. (2006 IEEE International Conference on Multimedia and Expo, ICME 2006 - Proceedings; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on spatial resolution of the microwave atomic forcemicroscope imaging affected by scanning speed

  Zhang, L., Hosoi, A. & Ju, Y., 2013, Advanced Materials Science and Technology. Trans Tech Publications Ltd, p. 200-203 4 p. (Materials Science Forum; vol. 750).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on spatial perception in immersive virtual space − Perception and psychological evaluation of distance with consideration of personal space −

  Yamada, S., Kitamoto, E., Jincho, N. & Oikawa, K., 2018 Oct 1, In: AIJ Journal of Technology and Design. 24, 58, p. 1299-1302 4 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• A Study on Sonification Method of Simulator-Based Ski Training for People with Visual Impairment

  Miura, Y., Kuribayashi, M., Wu, E., Koike, H. & Morishima, S., 2022 Dec 26, Proceedings - SIGGRAPH Asia 2022 Posters. Spencer, S. N. (ed.). Association for Computing Machinery, Inc, 33. (Proceedings - SIGGRAPH Asia 2022 Posters).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on shape optimization using affine transformation

  Kitayama, S. & Yamakawa, H., 2001, Proceedings of the ASME Design Engineering Technical Conference. Vol. 2. p. 671-676 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on semiconductor supply chain management in the automotive industry

  Nakashima, K. & Sornmanapong, T., 2013, In: Journal of Japan Industrial Management Association. 64, 2, p. 284-292 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on self and other ratings of hostility

  Izawa, S., Kodama, M. & Nomura, S., 2005 Feb, In: Shinrigaku Kenkyu. 75, 6, p. 530-535 6 p.

  Research output: Contribution to journal › Article › peer-review

• A study on scalable object replication method for the distributed cooperative storage system

  Yoshinaga, H., Tsuchiya, T., Sawano, H. & Koyanagi, K., 2009, Proceedings - 2009 4th International Conference on Digital Telecommunications, ICDT 2009. p. 96-101 6 p. 5205227. (Proceedings - 2009 4th International Conference on Digital Telecommunications, ICDT 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• A study on satellite network configuration control employing transmission power control

  Shimamoto, S., Kubota, H., Kuwabara, H. & Onozato, Y., 2000, In: Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi). 83, 7, p. 103-112 10 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on route/fleet selection problem for scm -using the property of latin square and ga

  Chiba, M., Sorimachi, T. & Yoshimoto, K., 2006 Dec 1, p. 1285-1296. 12 p.

  Research output: Contribution to conference › Paper › peer-review

• A study on reduction of chemical substance emission factor with sealer solvents mitigation effects on sealer paints for chemical substances emitted from building materials

  Hashimoto, Y., Nozaki, A., Tanabe, S., Kuwasawa, Y., Osawa, H. & Bogaki, K., 2010 Nov, In: Journal of Environmental Engineering. 75, 657, p. 987-992 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• A study on real-time scheduling of Holonic Manufacturing Systems 3rd report, modeling of decision criteria of utility values for estimation of future status of HMS

  Iwamura, K., Okubo, N., Tanimizu, Y. & Sugimura, N., 2006 Jan, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 72, 1, p. 261-266 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• A study on real-time scheduling of holonic manufacturing systems (5th report, estimation method of future status without decision criteria of other holons)

  Iwamura, K., Nakano, A., Tanimizu, Y. & Sugimura, N., 2008 Jun, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 74, 6, p. 1662-1668 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on real-time scheduling of Holonic Manufacturing Systems (4th report, multi-objective optimization process for individual holons and whole HMSs)

  Iwamura, K., Seki, Y., Tanimizu, Y. & Sugimura, N., 2006 Aug, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 72, 8, p. 2613-2620 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on real-time scheduling of holonic manufacturing systems

  Iwamura, K., Tanimizu, Y. & Sugimura, N., 2005, p. 421-426. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• A study on real-time scheduling for holonic manufacturing systems - Simulation for estimation of future status by individual holons

  Iwamura, K., Nakano, A., Tanimizu, Y. & Sugimura, N., 2007, Holonic and Multi-Agent Systems for Manufacturing - 3rd International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2007, Proceedings. Springer Verlag, p. 205-214 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4659 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)