Find Research outputs

Search results

• 2017

  Expanding factors in threat to face assessing the toughness/equivocation connection in Japanese televised political interviews

  Feldman, O. & Kinoshita, K., 2017 Jan 1, In: Language and Dialogue. 7, 3, p. 336-359 24 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Expanding the investigation of meaningful effects in physiology research

  Deighton, K., King, J. A., Stensel, D. J. & Jones, B., 2017, In: Future Science OA. 3, 3, FSO218.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  4 Citations (Scopus)

• Expantion and measurement of spiral foldedmembrane by small satellite

  Miyashita, T., Yamakawa, H., Katsumata, N. & Natori, M. C., 2017, AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., AIAA 2017-0848. (AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Expelling the poor: Atlantic seaboard states and the nineteenth-century origins of American immigration policy

  Hirota, H., 2017 Jan 1, Oxford University Press. 306 p.

  Research output: Book/Report › Book
  48 Citations (Scopus)

• Experimental Analysis for the Design of Sustainable Service Computing Infrastructure

  Otsuka, R., Nakajima, Y. & Hishiyama, R., 2017 Dec 19, Proceedings - 2017 International Conference on Culture and Computing, Culture and Computing 2017. Institute of Electrical and Electronics Engineers Inc., p. 29-34 6 p. (Proceedings - 2017 International Conference on Culture and Computing, Culture and Computing 2017; vol. 2017-December).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental and numerical investigation of static and fatigue behavior of mortar with blast furnace slag sand as fine aggregates in air and water

  Farooq, M. A., Sato, Y., Ayano, T. & Niitani, K., 2017 Jul 15, In: Construction and Building Materials. 143, p. 429-443 15 p.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• Experimental and numerical studies on post-facture behavior of simply supported composite twin I-girder bridges

  Lam, H., Lin, W. & Yoda, T., 2017 Jan 1, IABSE Conference, Vancouver 2017: Engineering the Future - Report. International Association for Bridge and Structural Engineering (IABSE), p. 206-213 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental evaluation of encoding parameters of MPEG-4 ALS for high-resolution audio

  Amada, S., Kamamoto, Y., Harada, N., Sugiura, R., Moriya, T., Makino, S. & Yamada, T., 2017 Dec 19, 2017 IEEE 6th Global Conference on Consumer Electronics, GCCE 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p. (2017 IEEE 6th Global Conference on Consumer Electronics, GCCE 2017; vol. 2017-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental Evaluation of Temperature and Concentration Effects on Heat of Dissociation of CO₂-loaded MEA Solution in Strippers

  Nakagaki, T., Yamabe, R., Furukawa, Y., Sato, H. & Yamanaka, Y., 2017, In: Energy Procedia. 114, p. 1910-1918 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Experimental evidence of inter-blade cavitation vortex development in Francis turbines at deep part load condition

  Yamamoto, K., Müller, A., Favrel, A. & Avellan, F., 2017 Oct 1, In: Experiments in Fluids. 58, 10, 142.

  Research output: Contribution to journal › Article › peer-review
  39 Citations (Scopus)

• Experimental examination and simulation analysis of standing-Type personal mobility device sharing

  Tomita, K., Hashimoto, N., Kamimura, A., Yokozuka, M. & Matsumoto, O., 2017 Apr 4, Proceedings of the 19th Conference of Open Innovations Association, FRUCT 2016. Tyutina, T. & Balandin, S. (eds.). IEEE Computer Society, p. 248-255 8 p. 7892208. (Conference of Open Innovation Association, FRUCT).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Experimental Hydro-Mechanical Characterization of Full Load Pressure Surge in Francis Turbines

  Müller, A., Favrel, A., Landry, C., Yamamoto, K. & Avellan, F., 2017 Apr 4, In: Journal of Physics: Conference Series. 813, 1, 012018.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Experimental investigation of debris-induced loading in tsunami-like flood events

  Stolle, J., Takabatake, T., Mikami, T., Shibayama, T., Goseberg, N., Nistor, I. & Petriu, E., 2017 Sep, In: Geosciences (Switzerland). 7, 3, 74.

  Research output: Contribution to journal › Article › peer-review
  18 Citations (Scopus)

• Experimental investigation of the degradation mechanism of silicone rubber exposed to heat and gamma rays

  Hanada, S., Miyamoto, M., Hirai, N., Yang, L. & Ohki, Y., 2017 Jun, In: High Voltage. 2, 2, p. 92-101 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  38 Citations (Scopus)

• Experimental investigation of the mass flow gain factor in a draft tube with cavitation vortex rope

  Landry, C., Favrel, A., Müller, A., Yamamoto, K., Alligné, S. & Avellan, F., 2017 Apr 4, In: Journal of Physics: Conference Series. 813, 1, 012022.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Experimental investigation on diffuser rotating stall in a three-stage centrifugal pump

  Takamine, T., Watanabe, S., Furukawa, D., Watanabe, H. & Miyagawa, K., 2017 Jan 1, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), Vol. 1A-2017.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Experimental investigations of debris dynamics over a horizontal plane

  Nistor, I., Goseberg, N., Stolle, J., Mikami, T., Shibayama, T., Nakamura, R. & Matsuba, S., 2017 May 1, In: Journal of Waterway, Port, Coastal and Ocean Engineering. 143, 3, 04016022.

  Research output: Contribution to journal › Article › peer-review
  29 Citations (Scopus)

• Experimental Measurements and Computations for Clarifying Nearly Complete Air-Insulation Obtained by the Concept of Colliding Pulsed Supermulti-Jets

  Konagaya, R., Oyanagi, S., Kanase, T., Tsuchiya, J., Ayukawa, K., Kinoshita, K., Mikoda, J., Fujita, H. & Naitoh, K., 2017 Mar 28, In: SAE Technical Papers. 2017-March, March

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Experimental performance of a double-lift absorption heat transformer for manufacturing-process steam generation

  Arnas, A., Giannetti, N., Yamaguchi, S., Saito, K. & Inoue, N., 2017 Sep 15, In: Energy Conversion and Management. 148, p. 267-278 12 p.

  Research output: Contribution to journal › Article › peer-review
  21 Citations (Scopus)

• Experimental Services of Energy Management for Energy Users in Business Region on Miyakojima City All-Islands EMS Demonstration Project

  Iino, Y., Ogita, Y., Shimoda, G., Zenhira, M., Mikami, S. & Ikema, Y., 2017 Sep, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 200, 4, p. 19-29 11 p.

  Research output: Contribution to journal › Article › peer-review

• Experimental study of the water jet induced by underwater electrical discharge in a narrow rectangular tube

  Koita, T., Zhu, Y. & Sun, M., 2017 Mar 1, In: Shock Waves. 27, 2, p. 257-270 14 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental study on oscillating flow steam engine in a single micro tube

  Kanno, H., Han, Y. & Shikazono, N., 2017 Feb 1, In: Experimental Thermal and Fluid Science. 81, p. 291-303 13 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Experimental study on shapes of tactile signs for distinguishable identification on body soap containers

  Doi, K., Nishimura, T., Wada, T., Fujimoto, H. & Hoshikawa, Y., 2017 Jan, In: Journal of Advanced Computational Intelligence and Intelligent Informatics. 21, 1, p. 100-108 9 p.

  Research output: Contribution to journal › Article › peer-review

• Experiments on the simultaneous partitioning of divalent cations between pyrite or pyrrhotite and 2M aqueous chloride solution under supercritical conditions

  Uchida, E., Hata, Y. & Uemura, H., 2017, In: Japanese Magazine of Mineralogical and Petrological Sciences. 46, 4, p. 124-134 11 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Expert information and majority decisions

  Kawamura, K. & Vlaseros, V., 2017 Mar 1, In: Journal of Public Economics. 147, p. 77-88 12 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Explicit instruction of rules interferes with visuomotor skill transfer

  Tanaka, K. & Watanabe, K., 2017 Jun 1, In: Experimental Brain Research. 235, 6, p. 1689-1700 12 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Exploiting the slip behavior of friction based clutches for safer adjustable torque limiters

  Wang, Y., Schmitz, A., Kobayashi, K., Lopez, J. A. A., Wang, W., Matsuo, Y., Sakamoto, Y. & Sugano, S., 2017 Aug 21, 2017 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2017. Institute of Electrical and Electronics Engineers Inc., p. 1346-1351 6 p. 8014205. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Exploring Blended Learning in a Postsecondary Spanish Language Program: Observations, Perceptions, and Proficiency Ratings

  Romeo, K., Bernhardt, E. B., Miano, A. & Leffell, C. M., 2017 Dec 1, In: Foreign Language Annals. 50, 4, p. 681-696 16 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Exploring the effectiveness of using temporal order information for the early-recognition of suture surgery's six steps based on video image analyses of surgeons' hand actions

  Tsubota, M., Li, Y. & Ohya, J., 2017 Dec 8, RO-MAN 2017 - 26th IEEE International Symposium on Robot and Human Interactive Communication. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-January. p. 464-469 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Extended vector-tensor theories

  Kimura, R., Naruko, A. & Yoshida, D., 2017 Jan 2, In: Journal of Cosmology and Astroparticle Physics. 2017, 1, 002.

  Research output: Contribution to journal › Article › peer-review
  71 Citations (Scopus)

• Extensive and intensive margins and exchange rate regimes

  Hamano, M. & Picard, P. M., 2017 Aug 1, In: Canadian Journal of Economics. 50, 3, p. 804-837 34 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Extracting the values of resting-state functional connectivity that correlate with a tendency of internet addiction

  Izawa, S., Tachikawa, K., Ono, Y., Kobayashi, H., Kuriki, S. & Ishiyama, A., 2017, In: Transactions of Japanese Society for Medical and Biological Engineering. 55, 1, p. 39-44 6 p.

  Research output: Contribution to journal › Article › peer-review

• Extraction of relationships between learners' physiological information and learners' mental states by machine learning

  Tawatsuji, Y., Uno, T., Okazaki, K., Fang, S. & Matsui, T., 2017 Jan 1, Proceedings of the 25th International Conference on Computers in Education, ICCE 2017 - Main Conference Proceedings. Mohd Ayub, A. F., Mitrovic, A., Yang, J-C., Wong, S. L. & Chen, W. (eds.). Asia-Pacific Society for Computers in Education, p. 56-61 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Extremely localized interaction in a market model

  Sasai, K., Gunji, Y. P. & Kinoshita, T., 2017 Mar 1, In: Artificial Life and Robotics. 22, 1, p. 125-129 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Fabrication and anisotropic electronic property for oriented Li_1+x−yNb_1−x−3yTi_x+4yO₃ solid solution by slip casting in a high magnetic field

  Nakano, H., Furuya, S., Yuasa, M., Suzuki, T. S. & Ohsato, H., 2017 Sep, In: Advanced Powder Technology. 28, 9, p. 2373-2379 7 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Fabrication and evaluation of dental endoscopic instruments using fiber-optic system

  Fujimoto, M., Yoshii, S., Kitamura, C., Ikezawa, S. & Ueda, T., 2017 Jan 5, IEEE Sensors, SENSORS 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 7808473

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication and mechanical properties of textured T₃SiC₂ systems using commercial powders

  Uchida, Y., Morita, K., Suzuki, T. S., Nishimura, T., Fujimoto, K. & Sakka, Y., 2017 Oct, In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 64, 10, p. 552-557 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Fabrication of (110) grain-oriented 0.15BaTiO₃-0.85(Bi_0.5Na_0.5)TiO₃ ceramics by a reactive templated grain growth method

  Ueno, S., Itou, R., Suzuki, T. S., Wada, S. & Fujii, I., 2017 Oct, In: Japanese journal of applied physics. 56, 10, 10PD06.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Fabrication of bridged glass nanopillar structure with high scratch resistance

  Kuwae, H., Sudo, T., Okada, A., Takayama, K., Shoji, S. & Mizuno, J., 2017, In: IEEJ Transactions on Sensors and Micromachines. 137, 3, p. 72-77 6 p.

  Research output: Contribution to journal › Review article › peer-review

• Fabrication of channel type mixing devices for efficient solvent extraction for high purity silica production

  Akash, Y. V., Mimura, M., Kunimoto, M., Fukunaka, Y. & Homma, T., 2017, ECS Transactions. Abbott, A. P., Alkire, R., Allongue, P., Anderson, T. J., Bartlett, P. N., Bayachou, M., Bhansali, S., Birbilis, N., Bocarsly, A. B., Bock, C., Boltalina, O. V., Brankovic, S., Buchheit, R., Buttry, D. A., Calabrese Barton, S., Carter, M. T., Chaitanya, V., Cheek, G. T., Chen, Z., Chidambaram, D., Chin, B. A., Choi, J. W., Chu, D., Cliffel, D. E., Deligianni, H., Di Noto, V., Dimitrov, N., Doeff, M., Douglas, E. A., Druffel, T., Edstrom, K., Fenton, J. M., Fergus, J., Fransaer, J., Fukunaka, Y., Guyomard, D., Hamada, H., Haverhals, L. M., Hesketh, P., Hillier, A. C., Hite, J. K., Imahori, H., Inaba, M., Innocenti, M., Itagaki, M., Johnson, C., Katayama, H., Kilgore, S. H., Kim, D. J., Koehne, J., Kostecki, R., Krumdick, G., Kulesza, P. J., Leddy, J., Lee, J. J., Leonte, O., Lu, Y. C., Lucht, B. L., Lynch, R. P., Manivannan, M., Mantz, R. A., Marcus, P., Maurice, V., Mauter, M., Mauzeroll, J., McMurray, H. N., Meng, Y. S., Miller, E. L., Milosev, I., Minteer, S. D., Mitra, S., Mukerjee, S., Mukundan, R., Muldoon, J., Nagahara, L., Narayan, S. R., Natishan, P. M., Navaei, M., Nicholas, J. D., Noel, J., Nonnenmann, S. S., O'Dwyer, C., Orazem, M. E., Oren, Y., Park, J. G., Pharkya, P., Pintauro, P. N., Pylypenko, S., Rajeshwar, K., Ramasamy, R. P., Rhodes, C., Riemer, D. P., Roeper, D., Rohwerder, M., Romankiw, L., Rotkin, S. V., Rupp, J. L. M., Sailor, M. J., Schwartz, D. T., Sekhar, P. K., Sharma, N., Simonian, A., Smith, D. K., Smith, K. C., Soleymani, L., Stafford, G. R., Staser, J. A., Subramanian, V., Subramanian, V. R., Sundaram, K. B., Suroviec, A. H., Suto, K., Tao, M., Tatsuma, T., Trulove, P. C., Vanysek, P., Vasiljevic, N., Vaughey, J. T., Virtanen, S., Wang, H., Wang, W., Whitacre, J. F., Williams, G., Winter, M., Wood, D. L., Wu, G., Wu, N., Xiao, J., Xing, Y., Xu, H., Yang, J. J. & Zangari, G. (eds.). 10 ed. Electrochemical Society Inc., p. 1441-1446 6 p. (ECS Transactions; vol. 80, no. 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of colloidal crystals composed of pore-expanded mesoporous silica nanoparticles prepared by a controlled growth method

  Yamamoto, E., Mori, S., Shimojima, A., Wada, H. & Kuroda, K., 2017 Feb 21, In: Nanoscale. 9, 7, p. 2464-2470 7 p.

  Research output: Contribution to journal › Article › peer-review
  23 Citations (Scopus)

• Fabrication of flexible nanoporous nitrogen-doped graphene film for high-performance supercapacitors

  Yue, S., Tong, H., Gao, Z., Bai, W., Lu, L., Wang, J. & Zhang, X., 2017 Jun 1, In: Journal of Solid State Electrochemistry. 21, 6, p. 1653-1663 11 p.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Fabrication of Mesoporous Cu Films on Cu Foils and Their Applications to Dopamine Sensing

  Baba, D., Li, C., Malgras, V., Jiang, B., Alamri, H. R., Alothman, Z. A., Hossain, M. S. A., Yamauchi, Y. & Asahi, T., 2017 Sep 19, In: Chemistry - An Asian Journal. 12, 18, p. 2467-2470 4 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Fabrication of micro-alginate gel tubes utilizing micro-gelatin fibers

  Sakaguchi, K., Arai, T., Shimizu, T. & Umezu, S., 2017 May, In: Japanese journal of applied physics. 56, 5, 05EB06.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Fabrication of micro-gelatin fiber utilizing coacervation method

  Arai, T., Tanaka, R., Sakaguchi, K. & Umezu, S., 2017 Jun 1, In: Artificial Life and Robotics. 22, 2, p. 197-202 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Fabrication of photo-electrochemical biosensors for ultrasensitive screening of mono-bioactive molecules: The effect of geometrical structures and crystal surfaces

  Akhtar, N., Emran, M. Y., Shenashen, M. A., Khalifa, H., Osaka, T., Faheem, A., Homma, T., Kawarada, H. & El-Safty, S. A., 2017, In: Journal of Materials Chemistry B. 5, 39, p. 7985-7996 12 p.

  Research output: Contribution to journal › Article › peer-review
  70 Citations (Scopus)

• Fabrication of piezoresistive based pressure sensor via purified and functionalized CNTs/PDMS nanocomposite: Toward development of haptic sensors

  Azhari, S., Termeh Yousefi, A., Tanaka, H., Khajeh, A., Kuredemus, N., Mansouri Bigdeli, M. & Hamidon, M. N., 2017 Oct 15, In: Sensors and Actuators, A: Physical. 266, p. 158-165 8 p.

  Research output: Contribution to journal › Article › peer-review
  21 Citations (Scopus)

• Fabrication of self-standing curved film with pillar arrays by large area spherical soft-UV imprint lithography

  Kamibayashi, T., Kuwae, H., Nobori, A., Shoji, S. & Mizuno, J., 2017 Jun 5, 2017 International Conference on Electronics Packaging, ICEP 2017. Institute of Electrical and Electronics Engineers Inc., p. 148-151 4 p. 7939344

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Face numbers and the fundamental group

  Murai, S. & Novik, I., 2017 Oct 1, In: Israel Journal of Mathematics. 222, 1, p. 297-315 19 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Face numbers of manifolds with boundary

  Murai, S. & Novik, I., 2017, In: International Mathematics Research Notices. 2017, 12, p. 3603-3646 44 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)