Find Research outputs

Search results

• Proceedings of the 16th European Conference on Diamond, Diamond-like Materials, Carbon Nanotubes, and Nitrides (Diamond 2005), Toulouse, France, September 11-16, 2005

  Robertson, J., Kawarada, H., Kohn, E. & Sitar, Z., 2006 Jan 1, In: Diamond and Related Materials. 15, 4-8, 1 p.

  Research output: Contribution to journal › Editorial › peer-review
  1 Citation (Scopus)

• Proceedings of the 19th European conference on diamond, diamond-like materials, carbon nanotubes, and nitrides (Diamond 2008), Sitges, Spain, 7-11 September 2008{star, open}

  Robertson, J., Kawarada, H., Kohn, E. & Hamers, R., 2009, In: Diamond and Related Materials. 18, 5-8, p. 7 1 p.

  Research output: Contribution to journal › Editorial › peer-review

• Proceedings of the 2009 ACM SIGCHI international workshop on intercultural collaboration, IWIC'09: Foreword

  Fussell, S., Hinds, P. & Ishida, T., 2009 Jul 23, In: Proceedings of the 2009 ACM SIGCHI International Workshop on Intercultural Collaboration, IWIC'09. p. iii

  Research output: Contribution to journal › Editorial › peer-review

• Proceedings of the first international workshop on the theoretical calculation of ELNES and XANES (TEX2008) (Nagoya, Japan, 2-4 July 2008)

  Tanaka, I., Mizoguchi, T. & Yamamoto, T., 2009 May 11, In: Journal of Physics Condensed Matter. 21, 10, 100301.

  Research output: Contribution to journal › Editorial › peer-review
  1 Citation (Scopus)

• Proceedings of the sixteenth workshop on general relativity and gravitation in japan

  Oohara, K. I., Shiromizu, T., Maeda, K. I. & Sasaki, M., 2006 Dec 1, In: Proceedings of the 16th Workshop on General Relativity and Gravitation in Japan, JGRG 2006. p. ii

  Research output: Contribution to journal › Editorial › peer-review

• Process analysis about spent lithium batteries valorization

  Granata, G., Trabucco, F., Moscardini, E., Furlani, G., Pagnanelli, F. & Toro, L., 2010, 19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Process analysis of ozone formation under different weather conditions over the Kanto region of Japan using the MM5/CMAQ modelling system

  Khiem, M., Ooka, R., Hayami, H., Yoshikado, H., Huang, H. & Kawamoto, Y., 2010 Nov, In: Atmospheric Environment. 44, 35, p. 4463-4473 11 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Process dependence of Ir-based bond coatings

  Murakami, H., Yano, T. & Sodeoka, S., 2004 Sep, In: Materials Transactions. 45, 9, p. 2886-2890 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  15 Citations (Scopus)

• Process design for efficient and controlled drug incorporation into polymeric micelle carrier systems

  Kohori, F., Yokoyama, M., Sakai, K. & Okano, T., 2002 Jan 17, In: Journal of Controlled Release. 78, 1-3, p. 155-163 9 p.

  Research output: Contribution to journal › Article › peer-review
  111 Citations (Scopus)

• PROCESS DISTORTION MEASURES AND APPLICATIONS TO STOCHASTIC SYSTEMS.

  Matsuyama, Y., Gray, R. M. & Buzo, L. A., 1979, In: Welding in the World, Le Soudage Dans Le Monde. p. 133-139 7 p.

  Research output: Contribution to journal › Article › peer-review

• PROCESS DISTORTION MEASURES FOR DISCRETE TIME STOCHASTIC PROCESSES AND THEIR BASIC PROPERTIES.

  Matsuyama, Y., 1981 Dec, In: Electronics & communications in Japan. 62, 12, p. 18-27 10 p.

  Research output: Contribution to journal › Article › peer-review

• Processes of firm growth and diversification: Theory and evidence

  Coad, A. & Guenther, C., 2014 Feb 27, In: Small Business Economics. 43, 4, p. 857-871 15 p.

  Research output: Contribution to journal › Article › peer-review
  20 Citations (Scopus)

• Process evaluation of use of high temperature gas-cooled reactors to an ironmaking system based on active carbon recycling energy system

  Hayashi, K., Kasahara, S., Kuribara, K., Nakagaki, T., Yan, X. L., Inagaki, Y. & Ogawa, M., 2015, In: isij international. 55, 2, p. 348-358 11 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• PROCESS FOR A CMOS CHANNEL-STOP IMPLANTATION SELF-ALIGNED TO THE P-WELL AND P-WELL ACTIVE AREA.

  Yamauchi, N., 1987 Dec 1, In: IEEE Transactions on Electron Devices. ED-34, 12

  Research output: Contribution to journal › Article › peer-review

• Process-independent workstation layout for lean automation

  Shigematsu, K., Yamazaki, Y., Kato, S., Kojima, F. & Takata, S., 2018 Jan 1, (Accepted/In press) In: CIRP Annals.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Processing and enhanced piezoelectric properties of highly oriented compositionally modified Pb(Zr,Ti)O₃ ceramics fabricated by magnetic alignment

  Miwa, Y., Kawada, S., Kimura, M., Omiya, S., Kubodera, N., Ando, A., Suzuki, T. S., Uchikoshi, T. & Sakka, Y., 2015 Apr 1, In: Applied Physics Express. 8, 4, 041501.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Processing capability and QoE driven optimized computation offloading scheme in vehicular fog based F-RAN

  Ye, T., Lin, X., Wu, J., Li, G. & Li, J., 2020 Jul 1, In: World Wide Web. 23, 4, p. 2547-2565 19 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Processing-dependent microstructural factors affecting cavitation damage and tensile ductility in a superplastic alumina dispersed with zirconia

  Hiraga, K., Nakano, K., Suzuki, T. S. & Sakka, Y., 2002 Nov 1, In: Journal of the American Ceramic Society. 85, 11, p. 2763-2770 8 p.

  Research output: Contribution to journal › Article › peer-review
  27 Citations (Scopus)

• Processing of consonant clusters by Japanese native speakers: Influence of English learning backgrounds

  Masuda, H. & Arai, T., 2010, In: Acoustical Science and Technology. 31, 5, p. 320-327 8 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Processing of facial information by computer

  Hasegawa, O., Morishima, S. & Kaneko, M., 1998 Oct, In: Electronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi). 81, 10, p. 36-57 22 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Processing of multiple forms of preprosodefrin in the abdominal gland of the red-bellied newt Cynops pyrrhogaster: Regional and individual differences in preprosodefrin gene expression

  Iwata, T., Conlon, J. M., Nakada, T., Toyoda, F., Yamamoto, K. & Kikuyama, S., 2004 Sep, In: Peptides. 25, 9, p. 1537-1543 7 p.

  Research output: Contribution to journal › Article › peer-review
  18 Citations (Scopus)

• Processing rhythmic pattern during chinese sentence reading: An eye movement study

  Luo, Y., Duan, Y. & Zhou, X., 2015, In: Frontiers in Psychology. 6, DEC, 01881.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Process in prompt supernova explosions revisited

  Sumiyoshi, K., Terasawa, M., Mathews, G. J., Kajino, T., Yamada, S. & Suzuki, H., 2001, In: Astrophysical Journal. 562, 2 PART II, p. 880-886 7 p.

  Research output: Contribution to journal › Article › peer-review
  62 Citations (Scopus)

• Process integration of fine pitch Cu redistribution wiring and SnCu micro-bumping for power efficient LSI devices with high-bandwidth stacked DRAM

  Ezawa, H., Togasaki, T., Migita, T., Yamashita, S., Inohara, M., Koshio, Y., Fukuda, M., Miyata, M. & Tatsumi, K., 2013 Mar, In: Microelectronic Engineering. 103, p. 22-32 11 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Process intensification for the distillation with heat-integration

  Matsuda, K., Iwakabe, K., Higuchi, T., Toda, M. & Nakaiwa, M., 2007, 2007 AIChE Annual Meeting. (2007 AIChE Annual Meeting).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Process of clay bed deformation due to the action of moving particles of bedload

  Masato, S., Ishihara, S., Fujiura, N. & Yoshikawa, F., 2020.

  Research output: Contribution to conference › Paper › peer-review

• Process of transition to turbulence in an oscillatory turbulent pipe flow

  Nakano, A. & Tanishita, K., 1992, American Society of Mechanical Engineers, Bioengineering Division (Publication) BED. New York, NY, United States: Publ by ASME, Vol. 22. p. 529-532 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Processor reservation system supporting dynamic QOS control

  Fujita, H., Nakajima, T. & Tezuka, H., 1995 Dec 1, p. 224-231. 8 p.

  Research output: Contribution to conference › Paper › peer-review
  12 Citations (Scopus)

• Processor virtualization for secure mobile terminals

  Inoue, H., Sakai, J. & Edahiro, M., 2008 Jul 1, In: ACM Transactions on Design Automation of Electronic Systems. 13, 3

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Process parameter calibration for millimeter-wave CMOS back-end device design with electromagnetic field analysis

  Amakawa, S., Orii, A., Katayama, K., Takano, K., Motoyoshi, M., Yoshida, T. & Fujishima, M., 2014, 2014 IEEE International Conference on Microelectronic Test Structures, ICMTS 2014 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 182-187 6 p. 6841490. (IEEE International Conference on Microelectronic Test Structures).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Process variation aware D-Flip-Flop design using regression analysis

  Nishizawa, S. & Onodera, H., 2018 May 9, 2018 19th International Symposium on Quality Electronic Design, ISQED 2018. IEEE Computer Society, p. 88-93 6 p. (Proceedings - International Symposium on Quality Electronic Design, ISQED; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Process variation estimation using a combination of ring oscillator delay and FlipFlop retention characteristics

  Konno, T., Nishizawa, S. & Ito, K., 2018 Jun 12, ICMTS 2018 - Proceedings of the 2018 IEEE International Conference on Microelectronic Test Structures. Institute of Electrical and Electronics Engineers Inc., p. 97-101 5 p. (IEEE International Conference on Microelectronic Test Structures; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Process Variation Estimation using An IDDQ Test and FlipFlop Retention Characteristics

  Nishizawa, S. & Ito, K., 2020 May, 2020 IEEE 33rd International Conference on Microelectronic Test Structures, ICMTS 2020 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 9107931. (IEEE International Conference on Microelectronic Test Structures; vol. 2020-May).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Proces uzyskiwania silnych poła̧czeń spajalnych plłytek kwarcowych i silikonowych w niskiej temperaturze

  Translated title of the contribution: Bonding of silicon and crystal quartz wafers at the minimized residual stressesZimin, Y., Ueda, T. & Pawłat, J., 2011, In: Przeglad Elektrotechniczny. 87, 8, p. 239-242 4 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Producing global economies from below: Chinese immigrant transnational entrepreneurship in Japan

  Farrer, G. L., 2013 Jan 1, Deciphering the Global: Its Scales, Spaces and Subjects. Taylor and Francis, p. 179-199 21 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  2 Citations (Scopus)

• Producing mechanism of an algicidal compound against red tide phytoplankton in a marine bacterium γ-proteobacterium

  Nakashima, T., Miyazaki, Y., Matsuyama, Y., Muraoka, W., Yamaguchi, K. & Oda, T., 2006 Dec, In: Applied Microbiology and Biotechnology. 73, 3, p. 684-690 7 p.

  Research output: Contribution to journal › Article › peer-review
  95 Citations (Scopus)

• Producing titanium by reducing TiCl₂-MgCl₂ mixed salt with magnesium in the molten state

  Fuwa, A. & Takaya, S., 2005 Oct, In: JOM. 57, 10, p. 56-60 5 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Product architecture, organizational capabilities and IT integration for competitive advantage

  Park, Y., Fujimoto, T. & Hong, P., 2012 Oct, In: International Journal of Information Management. 32, 5, p. 479-488 10 p.

  Research output: Contribution to journal › Article › peer-review
  41 Citations (Scopus)

• Product cycle, contractibility, and global sourcing

  Chen, X., Lu, Y. & Zhu, L., 2017 Jul 1, In: Journal of Development Economics. 127, p. 283-296 14 p.

  Research output: Contribution to journal › Article › peer-review

• Product design optimization method considering the integrated satisfaction level

  Yoshimura, M., Satou, M., Miyashita, T. & Yamakawa, H., 2012, Proceedings of the IASTED International Conference on Engineering and Applied Science, EAS 2012. p. 303-310 8 p. (Proceedings of the IASTED International Conference on Engineering and Applied Science, EAS 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Product design optimization method considering the integrated satisfaction level

  Yoshimura, M., Sato, M., Miyashita, T. & Yamakawa, H., 2013, In: Control and Intelligent Systems. 41, 3, p. 117-126 10 p.

  Research output: Contribution to journal › Article › peer-review

• Product development and competitiveness

  Clark, K. B. & Fujimoto, T., 1992 Jun, In: Journal of The Japanese and International Economies. 6, 2, p. 101-143 43 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• Product Development the Japanese Way

  Czinkota, M. & Kotabe, M., 1990 Jun, In: Journal of Business Strategy. 11, 6, p. 31-36 6 p.

  Research output: Contribution to journal › Review article › peer-review
  30 Citations (Scopus)

• Product functional structure model for engineer-to-order production: A case study on drilling machines

  Akasaka, S., Weng, J. & Onari, H., 2015, In: Journal of Japan Industrial Management Association. 66, 4E, p. 443-447 5 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Product innovation of shinzaburo hanpu and regional characteristic of Kyoto

  Irisawa, Y. & Nagasawa, S., 2011 Jun, In: Journal of Advanced Computational Intelligence and Intelligent Informatics. 15, 4, p. 418-424 7 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Production adjusting method based on predicted distribution of production and inventory using dynamic Bayesian network

  Park, Y. H., Shin, J. S., Woo, K. Y., Shoji, F. & Lee, H. H., 2009 Dec 1, Proceedings of the 14th International Symposium on Artificial Life and Robotics, AROB 14th'09. p. 63-68 6 p. (Proceedings of the 14th International Symposium on Artificial Life and Robotics, AROB 14th'09).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Production adjusting method based on the predicted distribution of production and inventory using a dynamic Bayesian network

  Park, Y. H., Shin, J. S., Woo, K. Y., Shoji, F. & Lee, H. H., 2009 Nov 1, In: Artificial Life and Robotics. 14, 2, p. 138-143 6 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Production and characterization of genetically modified human IL-11 variants

  Sano, E., Takei, T., Ueda, T. & Tsumoto, K., 2017 Feb 1, In: Biochimica et Biophysica Acta - General Subjects. 1861, 2, p. 205-217 13 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Production and evaluation of stereoscopic video presentation in surgical training

  Ilgner, J., Kawai, T., Westhofen, M. & Shibata, T., 2004 Dec 1, In: Proceedings of SPIE - The International Society for Optical Engineering. 5291, p. 293-302 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  12 Citations (Scopus)

• Production and test of the LHCf microstrip silicon system

  Bonechi, L., Adriani, O., Bongi, M., Castellini, G., D'Alessandro, R., Faus, A., Haguenauer, M., Itow, Y., Kasahara, K., Macina, D., Mase, T., Masuda, K., Matsubara, Y., Matsumoto, H., Menjo, H., Mizuishi, M., Muraki, Y., Papini, P., Perrot, A. L., Ricciarini, S., & 9 othersSako, T., Shimizu, Y., Tamura, T., Torii, S., Tricomi, A., Turner, W. C., Velasco, J., Watanabe, H. & Yoshida, K., 2008 Oct 21, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 596, 1, p. 85-87 3 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)