Search concepts
|
Selected filters
|
- 57,850 - 57,900 out of 76,521 results
Search results
-
Design of a low vulnerability electronic fiber optic seal system
Di, Y., Zhang, Q., Zuo, G., Han, F., Chen, R., Huo, Y. & Xu, P., 2013, International Conference on Nuclear Engineering, Proceedings, ICONE. American Society of Mechanical Engineers (ASME), Vol. 3.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Design of a low-order sensorless controller by robust H∞ control for boost converters
Li, X., Chen, M., Shinohara, H. & Yoshihara, T., 2016 May, In: Journal of Power Electronics. 16, 3, p. 1025-1035 11 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Design of a kirigami structure with a large uniform deformation region
Taniyama, H. & Iwase, E., 2021 Jan, In: Micromachines. 12, 1, p. 1-14 14 p., 76.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Design of a high-current ac downlink using Bi-based superconductors
Fisher, B. L., Lanagan, M. T., Balachandran, U., Honjo, S. & Hara, T., 1997, In: IEEE Transactions on Applied Superconductivity. 7, 2 PART 1, p. 711-714 4 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Design of a hardware track finder (Fast Tracker) for the ATLAS trigger
Cavaliere, V., Adelman, J., Albicocco, P., Alison, J., Ancu, L. S., Anderson, J., Andari, N., Andreani, A., Andreazza, A., Annovi, A., Antonelli, M., Asbah, N., Atkinson, M., Baines, J., Barberio, E., Beccherle, R., Beretta, M., Bertolucci, F., Biesuz, N. V., Blair, R., & 90 others , 2016 Feb 18, In: Journal of Instrumentation. 11, 2, C02056.Research output: Contribution to journal › Article › peer-review
Open Access5 Citations (Scopus) -
Design of a GMPLS control plane with PCE-based impairment-aware full restoration capability for translucent WSON: Enabling techniques, service demonstration, and performance evaluation
Liu, L., Tsuritani, T., Casellas, R., Morita, I., Martínez, R. & Muñoz, R., 2013 Jan, In: Optical Switching and Networking. 10, 1, p. 16-31 16 p.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
Design of a Global Decision Support System for a manufacturing SME: Towards participating in Collaborative Manufacturing
Lin, H. W., Nagalingam, S. V., Kuik, S. S. & Murata, T., 2012 Mar, In: International Journal of Production Economics. 136, 1, p. 1-12 12 p.Research output: Contribution to journal › Article › peer-review
45 Citations (Scopus) -
Design of a global car production-logistics system for a future ASEAN-China region
Katayama, H., 1999, In: International Journal of Operations and Production Management. 19, 5-6, p. 582-603 22 p.Research output: Contribution to journal › Article › peer-review
17 Citations (Scopus) -
Design of a Discrete Element Method Parameter Identification System for the Efficient Excavation of Mining Shovels Based on Excavation Resistance Analysis
Iwata, H., Yu, S., Mizushima, S. & Yamamura, S., 2022 May, In: International Journal of Mechanical Engineering and Robotics Research. 11, 5, p. 304-310 7 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Design of a conduction-cooled 9.4 T REBCO magnet for whole-body MRI systems
Miyazaki, H., Iwai, S., Otani, Y., Takahashi, M., Tosaka, T., Tasaki, K., Nomura, S., Kurusu, T., Ueda, H., Noguchi, S., Ishiyama, A., Urayama, S. & Fukuyama, H., 2016 Aug 12, In: Superconductor Science and Technology. 29, 10, 104001.Research output: Contribution to journal › Article › peer-review
38 Citations (Scopus) -
Design of a computational model for social learning support and analystics
Yen, N. Y., Hung, J. C., Chen, C. C. & Jin, Q., 2019 Mar, In: Computers in Human Behavior. 92, p. 547-561 15 p.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
Design of a chirping cell attached rf gun for ultra-short electron bunch generation
Sakaue, K., Tamai, K., Washio, M. & Urakawa, J., 2011 Dec 1, IPAC 2011 - 2nd International Particle Accelerator Conference. p. 1129-1131 3 p. (IPAC 2011 - 2nd International Particle Accelerator Conference).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Design of a battery-powered multi-purpose bipedal locomotor with parallel mechanism
Sugahara, Y., Endo, T., Lim, H. O. & Takanishi, A., 2002, p. 2658-2663. 6 p.Research output: Contribution to conference › Paper › peer-review
52 Citations (Scopus) -
Design of a 3-D vision system based on geometric knowledge
Dohi, H. & Ishizuka, M., 1989, Proc Int Workshop Ind Appl Machine Intell Vision. Anon (ed.). Piscataway, NJ, United States: Publ by IEEE, p. 217-222 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Design of a 300-mV 2.4-GHz receiver using transformer-Coupled techniques
Zhang, F., Miyahara, Y. & Otis, B. P., 2013 Dec, In: IEEE Journal of Solid-State Circuits. 48, 12, p. 3190-3205 16 p., 6613557.Research output: Contribution to journal › Article › peer-review
36 Citations (Scopus) -
Design of a 1 kW class gamma type Stirling engine
Raggi, L., Katsuta, M. & Sekiya, H., 1997 Jan 1, In: Proceedings of the Intersociety Energy Conversion Engineering Conference. 2, p. 991-996 6 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Design of a 128-mb SOI DRAM using the floating body cell (FBC)
Ohsawa, T., Fujita, K., Hatsuda, K., Higashi, T., Shino, T., Minami, Y., Nakajima, H., Morikado, M., Inoh, K., Hamamoto, T., Watanabe, S., Fujii, S. & Furuyama, T., 2006 Jan, In: IEEE Journal of Solid-State Circuits. 41, 1, p. 135-145 11 p.Research output: Contribution to journal › Article › peer-review
14 Citations (Scopus) -
Design of 16S rRNA-targeted oligonucleotide probes and microbial community analysis in the denitrification process of a saline industrial wastewater treatment system
Yoshie, S., Noda, N., Tsuneda, S., Hirata, A. & Inamori, Y., 2004 Jun 1, In: FEMS Microbiology Letters. 235, 1, p. 183-189 7 p.Research output: Contribution to journal › Article › peer-review
12 Citations (Scopus) -
Design Modification of Greenhouse Effect Solar-Hybrid Rack Type Dryer
Wulandani, D., Agustina, S. E., Yulianto, M., Nelwan, L. O. & Rahman, L. M., 2019 Jun 28, In: IOP Conference Series: Materials Science and Engineering. 557, 1, 012054.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Design methodology using topology optimization for anti-vibration reinforcement of generators in a ship's engine room
Daifuku, M., Nishizu, T., Takezawa, A., Kitamura, M., Terashita, H. & Ohtsuki, Y., 2016 Feb 1, In: Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment. 230, 1, p. 216-226 11 p.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
Design methodology of total timber 2-hour fire-resistive structural beam on sacrifice layer concept
Aoyama, G., Hasemi, Y., Hokibara, T., Saiyoshi, T., Kamikawa, D., Takase, R. & Suzuki, J. I., 2021.Research output: Contribution to conference › Paper › peer-review
-
Design methodology of process variation tolerant D-Flip-Flops for low voltage circuit operation
Nishizawa, S., Ishihara, T. & Onodera, H., 2014 Nov 5, International System on Chip Conference. Sridhar, R., Zhao, D., Shi, K. & Buchner, T. (eds.). IEEE Computer Society, p. 42-47 6 p. 6948897. (International System on Chip Conference).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Design methodology of piezoelectric energy-harvesting skin using topology optimization
Takezawa, A., Kitamura, M., Vatanabe, S. L. & Silva, E. C. N., 2014 Feb, In: Structural and Multidisciplinary Optimization. 49, 2, p. 281-297 17 p.Research output: Contribution to journal › Article › peer-review
35 Citations (Scopus) -
Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization
Takezawa, A., Lee, J. & Kitamura, M., 2018 Mar 1, In: Optimization and Engineering. 19, 1, p. 19-38 20 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Design methodology of embedded DRAM with virtual-socket architecture
Yamauchi, T., Kinoshita, M., Amano, T., Dosaka, K., Arimoto, K., Ozaki, H., Yamada, M. & Yoshihara, T., 2001 Jan, In: IEEE Journal of Solid-State Circuits. 36, 1, p. 46-54 9 p.Research output: Contribution to journal › Article › peer-review
4 Citations (Scopus) -
Design methodology of a robust ESD protection circuit for STI process 256 Mb NAND flash memory
Ikehashi, T., Imamiya, K. & Sakui, K., 1999 Dec 1, Electrical Overstress/Electrostatic Discharge Symposium Proceedings. ESD Assoc, p. 225-234 10 p. (Electrical Overstress/Electrostatic Discharge Symposium Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Design methodology of a robust esd protection circuit for sti process 256 mb nand flash memory
Ikehashi, T., Imamiya, K. & Sakui, K., 2000, In: IEEE Transactions on Electronics Packaging Manufacturing. 23, 4, p. 235 1 p.Research output: Contribution to journal › Article › peer-review
-
Design methodology of a robust bsd protection circuit for sti process 256 mb nand flash memory
Ikehashi, T., Imamiya, K. & Sakui, K., 2000, In: IEEE Transactions on Electronics Packaging Manufacturing. 23, 4, p. 246-254 9 p.Research output: Contribution to journal › Article › peer-review
-
Design methodology for variation tolerant d-flip-flop using regression analysis
Nishizawa, S. & Onodera, H., 2018 Dec, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences. E101A, 12, p. 2222-2230 9 p.Research output: Contribution to journal › Article › peer-review
-
Design methodology for porous composites with tunable thermal expansion produced by multi-material topology optimization and additive manufacturing
Takezawa, A. & Kobashi, M., 2017 Dec 15, In: Composites Part B: Engineering. 131, p. 21-29 9 p.Research output: Contribution to journal › Article › peer-review
89 Citations (Scopus) -
Design methodology for mass reduction of a mechanical product by extracting minimum structure
Fukushige, S., Taniyama, S. & Umeda, Y., 2007.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Design methodology for analog high frequency ICs
Miyahara, Y., Oumi, Y. & Moriyama, S., 1996, In: Proceedings - Design Automation Conference. p. 503-508 6 p.Research output: Contribution to journal › Conference article › peer-review
3 Citations (Scopus) -
Design Method of the Wheel Slip Speed Feedback Controller and Phase Lead Compensator in Locomotives
Aihara, M., Nagataki, M., Kondo, K. & Yamazaki, O., 2022, In: IEEJ Journal of Industry Applications. 11, 5, p. 686-695 10 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Design method of network operating systems based on the concept of an object
Takahashi, K., Ohta, Y., Shiratori, N. & Noguchi, S., 1989 Dec, In: Systems and Computers in Japan. 20, 12, p. 58-70 13 p.Research output: Contribution to journal › Article › peer-review
-
Design method of material handling systems for lean automation-Integrating equipment for reducing wasted waiting time
Yamazaki, Y., Shigematsu, K., Kato, S., Kojima, F., Onari, H. & Takata, S., 2017, (Accepted/In press) In: CIRP Annals - Manufacturing Technology.Research output: Contribution to journal › Article › peer-review
16 Citations (Scopus) -
Design method of intelligent interface for minimizing the number of questions and answers
Suzuki, J., Matsushima, T., Hirasawa, S. & Inazumi, H., 1988 Sep 1, In: Bulletin of Centre for Informatics (Waseda University). 8, p. 41-48 8 p.Research output: Contribution to journal › Article › peer-review
-
DESIGN METHOD OF HIGHLY RELIABLE COMMUNICATION NETWORK BY THE USE OF MATRIX CALCULATION.
Tanaka, Y., Fan, R. X. & Akiyama, M., 1988 Mar 1, In: Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi). 71, 3, p. 120-125 6 p.Research output: Contribution to journal › Article › peer-review
-
Design method of fault diagnosis of flowmeters using historical database - Evaluation based on probabilities of false-alarm and miss-alarm
Tateno, S., Sui, F. & Matsuyama, H., 2007 Dec 1, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 2523-2527 5 p. 4406789. (ICCAS 2007 - International Conference on Control, Automation and Systems).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Design method of a frequency domain based power controller for overhead line and electric double layer capacitor hybrid railway vehicles
Saito, T. & Kondo, K., 2015 Oct 1, In: ieej transactions on industry applications. 135, 10, p. 1049-1050 2 p.Research output: Contribution to journal › Article › peer-review
-
Design method considering the frequency band of the disturbance in the DC link voltage control system of hybrid electric vehicle driving systems
Heo, J. & Kondo, K., 2019 Nov 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 209, 1-2, p. 40-52 13 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
Design issues of ambient social media for better decision making
Nakajima, T. & Yamabe, T., 2011 Nov 7, Electronic Proceedings of the 2011 IEEE International Conference on Multimedia and Expo, ICME 2011. 6012154. (Proceedings - IEEE International Conference on Multimedia and Expo).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Design issues in composition kernels for highly functional embedded systems
Shimada, H., Kinebuchi, Y., Lin, T. H., Courbot, A. & Nakajima, T., 2011 Jun 23, 26th Annual ACM Symposium on Applied Computing, SAC 2011. p. 338-345 8 p. (Proceedings of the ACM Symposium on Applied Computing).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Design issues and experiences from having lessons in text-based social virtual reality environments
Jin, Q. & Yano, Y., 1997 Dec 1, In: Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. 2, p. 1418-1423 6 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Design issues and applications for a passive-dynamic walker
Trifonov, K., Enriquez, G. & Hashimoto, S., 2009, In: International Journal of Multimedia and Ubiquitous Engineering. 4, 3, p. 57-72 16 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
Design issues and an empirical study in mobility oriented service development
Yamabe, T., Takahashi, K. & Nakajima, T., 2008 Dec 1, Proceedings of the 1st Workshop on Mobile Middleware: Embracing the Personal Communication Device, Co-located with ACM/IFIP/USENIX International Middleware Conference, MobMid 2008. 1462691. (Proceedings of the 1st Workshop on Mobile Middleware: Embracing the Personal Communication Device, Co-located with ACM/IFIP/USENIX International Middleware Conference, MobMid 2008).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
4 Citations (Scopus) -
Design intent and thermal performance of facade thermal design methods in glass facade architecture in Tokyo
Lto, H., Yoneda, T., Kawada, K., Kim, J. & Tanabe, S. I., 2009 Dec, In: Journal of Environmental Engineering. 74, 646, p. 1347-1354 8 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Designing web menu for configurable goods
Shiga, T., Iwaihara, M. & Kambayashi, Y., 2003 Jan 1, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Bauknecht, K., Min Tjoa, A. & Quirchmayr, G. (eds.). Springer Verlag, p. 348-358 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 2738).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Designing virtual currency regulation in Japan: Lessons from the MT GOx case
Ishikawa, M., 2017 Sep 1, In: Journal of Financial Regulation. 3, 2, p. 125-131 7 p., fjw015.Research output: Contribution to journal › Article › peer-review
Open Access5 Citations (Scopus) -
Designing Ultrahigh-Refractive-Index Amorphous Poly(phenylene sulfide)s Based on Dense Intermolecular Hydrogen-Bond Networks
Watanabe, S. & Oyaizu, K., 2022 Mar 22, In: Macromolecules. 55, 6, p. 2252-2259 8 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Designing the embodied shadow media using virtual three-dimensional space
Kajita, Y., Takahashi, T., Miwa, Y. & Itai, S., 2015, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag, Vol. 9173. p. 610-621 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9173).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus)