Find Research outputs

Search results

• Conference contribution

  A study on intra-body communication for personal healthcare monitoring system

  Alshehab, A., Kobayash, N., Kikuchi, R., Ruiz, J., Shimamoto, S. & Ishibashi, H., 2008 Oct 6, 2008 10th IEEE Intl. Conf. on e-Health Networking, Applications and Service, HEALTHCOM 2008. p. 219-220 2 p. 4600139. (2008 10th IEEE Intl. Conf. on e-Health Networking, Applications and Service, HEALTHCOM 2008).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on load frequency control combining a PID controller and a disturbance observer

  Shibasaki, S., Onishi, H. & Iwamoto, S., 2009 Dec 16, Transmission and Distribution Conference and Exposition: Asia and Pacific, T and D Asia 2009. 5356861

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• A study on low temperature SAM modified POM direct bonding affected by VUV/O₃ irradiation

  Fu, W., Ma, B., Kuwae, H., Shoji, S. & Mizuno, J., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., p. 69 1 p. 7947465

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on measurement of conformability of the piston oil ring on the cylinder bore under engine operating condition by lif method using optical fiber

  Ito, A., Mochiduki, K., Kikuhara, K., Inui, M. & Akamatsu, H., 2013, ASME 2013 Internal Combustion Engine Division Fall Technical Conference, ICEF 2013. American Society of Mechanical Engineers (ASME), Vol. 2.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on methods to design and select energy storage devices for Fuel Cell hybrid powered railway vehicles

  Tsukahara, K. & Kondo, K., 2013 Dec 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4534-4539 6 p. 6699866. (IECON Proceedings (Industrial Electronics Conference)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)

• A study on motion compensated prediction in DCT domain with multiple mode selection

  Yamagisi, K., Katto, J. & Yasuda, Y., 2003 Dec 9, Picture Coding Symposium. p. 87-91 5 p. (Picture Coding Symposium).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on multi-level structural optimum design using qualitative sensitivities

  Arakawa, M. & Yamakawa, H., 1994, 5th Symposium on Multidisciplinary Analysis and Optimization, 1994. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 606-612 7 p. AIAA-94-4316-CP

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on N₂O formation mechanism and its reduction in a urea SCR system employed in a di diesel engine

  Matsui, W., Suzuki, T., Ohta, Y., Ito, S., Tanaka, Y., Kikuchi, Y., Daisho, Y., Suzuki, H. & Ishii, H., 2012, SAE Technical Papers. Vol. 9.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on object detection method from manga images using CNN

  Yanagisawa, H., Yamashita, T. & Watanabe, H., 2018 May 30, 2018 International Workshop on Advanced Image Technology, IWAIT 2018. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p. (2018 International Workshop on Advanced Image Technology, IWAIT 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  17 Citations (Scopus)

• A study on occupant kinematics behaviour and muscle activities during pre-impact braking based on volunteer tests

  Ejima, S., Ono, K., Holcombe, S., Kaneoka, K. & Fukushima, M., 2007 Dec 1, International Research Council on the Biomechanics of Injury - 2007 International IRCOBI Conference on the Biomechanics of Injury, Proceedings. p. 31-45 15 p. (International Research Council on the Biomechanics of Injury - 2007 International IRCOBI Conference on the Biomechanics of Injury, Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  34 Citations (Scopus)

• A study on OFDM millimeter-wave radio over fiber system

  Thi, T. H. & Matsumoto, M., 2013, Progress in Electromagnetics Research Symposium. p. 1321-1325 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on optimization the structure of ship in consideration of layout of the stiffeners

  Nonami, R., Kitamura, M., Takezawa, A. & Hirakawa, S., 2014, Proceedings of the 24th International Ocean and Polar Engineering Conference, ISOPE Busan. International Society of Offshore and Polar Engineers, p. 876-882 7 p. (Proceedings of the International Offshore and Polar Engineering Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on optimum topology of plate structure using coordinate transformation by conformal mapping

  Kitayama, S. & Yamakawa, H., 2002, Proceedings of the ASME Design Engineering Technical Conference. Vol. 2. p. 169-174 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on pancaking problem in Japanese power market

  Nishiyauchi, A., Kamemura, Y., Ohtaka, T. & Iwamoto, S., 2004, 2004 International Conference on Power System Technology, POWERCON 2004. Vol. 1. p. 171-176 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on path planning for small mobile robot to move in forest area

  Tanaka, K., Okamoto, Y., Ishii, H., Kuroiwa, D., Yokoyama, H., Inoue, S., Shi, Q., Okabayashi, S., Sugahara, Y. & Takanishi, A., 2018 Mar 23, 2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017. Institute of Electrical and Electronics Engineers Inc., p. 2167-2172 6 p. (2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on persuasive effect of preference of virtual agents

  Yoshii, A. & Nakajima, T., 2014 Feb 17, Advanced Technologies, Embedded and Multimedia for Human-Centric Computing, HumanCom and EMC 2013. p. 47-55 9 p. (Lecture Notes in Electrical Engineering; vol. 260 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on preconditions setting of long-term contract between manufacturer and component supplier

  Wu, S. & Onari, H., 2015, 23rd International Conference for Production Research, ICPR 2015. International Foundation for Production Research (IFPR)

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on probabilistic thermal acceptability evaluation

  Ukai, M., Tsusaka, G. & Nobe, T., 2016, Proceedings - 9th International Windsor Conference 2016: Making Comfort Relevant. Nicol, F., Roaf, S., Brotas, L. & Humphreys, M. A. (eds.). NCEUB 2016, p. 985-993 9 p. (Proceedings - 9th International Windsor Conference 2016: Making Comfort Relevant).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on project risk analysis model for outsourcing based on Bayesian networks: Application to small company OEM project of mold industry

  Kim, Y. S., Murata, T. & Ki, J., 2018 Jan 1, Proceedings of the International MultiConference of Engineers and Computer Scientists 2018, IMECS 2018. Castillo, O., Feng, D. D., Korsunsky, A. M., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, (Lecture Notes in Engineering and Computer Science; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on real-time responsiveness on virtualization based multi-OS embedded systems

  Kinebuchi, Y., Mitake, H., Yasukawa, Y., Morita, T., Courbot, A. & Nakajima, T., 2011 Sep 12, PECCS 2011 - Proceedings of the 1st International Conference on Pervasive and Embedded Computing and Communication Systems. p. 369-378 10 p. (PECCS 2011 - Proceedings of the 1st International Conference on Pervasive and Embedded Computing and Communication Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on real-time scheduling for holonic manufacturing systems - Determination of utility values based on multi-agent reinforcement learning

  Iwamura, K., Mayumi, N., Tanimizu, Y. & Sugimura, N., 2009, Holonic and Multi-Agent Systems for Manufacturing - 4th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2009, Proceedings. p. 135-144 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5696 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on real-time scheduling for holonic manufacturing systems - Simulation for estimation of future status by individual holons

  Iwamura, K., Nakano, A., Tanimizu, Y. & Sugimura, N., 2007, Holonic and Multi-Agent Systems for Manufacturing - 3rd International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2007, Proceedings. Springer Verlag, p. 205-214 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4659 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on scalable object replication method for the distributed cooperative storage system

  Yoshinaga, H., Tsuchiya, T., Sawano, H. & Koyanagi, K., 2009, Proceedings - 2009 4th International Conference on Digital Telecommunications, ICDT 2009. p. 96-101 6 p. 5205227. (Proceedings - 2009 4th International Conference on Digital Telecommunications, ICDT 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• A study on shape optimization using affine transformation

  Kitayama, S. & Yamakawa, H., 2001, Proceedings of the ASME Design Engineering Technical Conference. Vol. 2. p. 671-676 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on spatial resolution of the microwave atomic forcemicroscope imaging affected by scanning speed

  Zhang, L., Hosoi, A. & Ju, Y., 2013, Advanced Materials Science and Technology. Trans Tech Publications Ltd, p. 200-203 4 p. (Materials Science Forum; vol. 750).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on spatial scalable coding using vector representation

  Yamamoto, Y., Kawamura, K. & Watanabe, H., 2006, 2006 IEEE International Conference on Multimedia and Expo, ICME 2006 - Proceedings. p. 145-148 4 p. 4036557. (2006 IEEE International Conference on Multimedia and Expo, ICME 2006 - Proceedings; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on stablization of electric power supply under smart grid environment: Utilizing storage function of electric vehicles

  Takeyama, K., Murata, K. & Katayama, H., 2016, CIE 2016: 46th International Conferences on Computers and Industrial Engineering. Computers and Industrial Engineering

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on supercooling processes of leaf lettuces produced in plant factory

  Thinh, N. Q., Iwamura, K., Shrestha, R., Fukumoto, S., Takematsu, R., Yamaguchi, J. I., Kimura, K., Tanimizu, Y. & Sugimura, N., 2016 Dec 16, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 77-80 4 p. 7790139

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on the aged railway steel bridges renewed by hybrid structures

  Taniguchi, N., Lin, W., Hansaka, M., Ohkubo, F., Satake, S. & Sugino, Y., 2015, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. CRC Press/Balkema, p. 746-752 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on the circuit configuration with capacitors to compensate the power factor for high-power contactless power transformer

  Yamamoto, K., Maruyama, T., Kondo, K. & Kashiwagi, T., 2013 Jan 1, 2013 International Conference on Electrical Machines and Systems, ICEMS 2013. IEEE Computer Society, p. 2233-2238 6 p. 6754555

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• A study on the design method of the light weight coils for a high power contactless power transfer systems

  Maruyama, T., Yamamoto, K., Kitazawa, S., Kondo, K. & Kashiwagi, T., 2012 Dec 1, ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems. 6401934. (ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  11 Citations (Scopus)

• A study on the design of deployable cable-panel structure

  Seino, K., Parque, V. & Miyashita, T., 2017, 4th AIAA Spacecraft Structures Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA, (4th AIAA Spacecraft Structures Conference, 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on the effect of pressure balance between the second and third land of a piston on engine oil consumption

  Ohno, Y., Kikuhara, K., Ito, A., Inui, M. & Akamatsu, H., 2014, ASME 2014 Internal Combustion Engine Division Fall Technical Conference, ICEF 2014. Web Portal ASME (American Society of Mechanical Engineers), Vol. 2.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on the elongation behaviour of synthetic fibre ropes under cyclic loading

  Asane, D., Schmitz, A., Wang, Y. & Sugano, S., 2020 Oct 24, 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2020. Institute of Electrical and Electronics Engineers Inc., p. 6326-6331 6 p. 9341407. (IEEE International Conference on Intelligent Robots and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on the low temperature sintering-bonding through in-situ formation of Ag nanoparticles using Ag₂O microparticles

  Mu, F., Zou, G., Yan, J., Bai, H. & Wu, A., 2011 Nov 22, ICEPT-HDP 2011 Proceedings - 2011 International Conference on Electronic Packaging Technology and High Density Packaging. p. 293-301 9 p. 6066839. (ICEPT-HDP 2011 Proceedings - 2011 International Conference on Electronic Packaging Technology and High Density Packaging).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on the maximum use of PV power in a residential community -the case of utilizing of demand response program-

  Kuroiwa, H., Yamazaki, T., Wakao, S., Morita, K., Nakano, Y. & Sadakane, O., 2015 Dec 14, 2015 IEEE 42nd Photovoltaic Specialist Conference, PVSC 2015. Institute of Electrical and Electronics Engineers Inc., 7356254. (2015 IEEE 42nd Photovoltaic Specialist Conference, PVSC 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on the methodology to analyse and prevent medical errors due to non-observance

  Jin, H., Munechika, M., Sano, M., Kajihara, C., Chen, H. & Guo, F., 2017, Advances in Human Factors and Ergonomics in Healthcare - Proceedings of the AHFE International Conference on Human Factors and Ergonomics in Healthcare, 2016. Lightner, N. & Duffy, V. G. (eds.). Springer Verlag, p. 355-364 10 p. (Advances in Intelligent Systems and Computing; vol. 482).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on the reduction of mowing work burden for maintaining landscapes in rural areas: Experiment design for mowing behaviors analyze

  Wu, B., Wu, Y., Aoki, Y., Nishimura, S. & Kashiwagi, M., 2019 Aug, Proceedings - IEEE 17th International Conference on Dependable, Autonomic and Secure Computing, IEEE 17th International Conference on Pervasive Intelligence and Computing, IEEE 5th International Conference on Cloud and Big Data Computing, 4th Cyber Science and Technology Congress, DASC-PiCom-CBDCom-CyberSciTech 2019. Institute of Electrical and Electronics Engineers Inc., p. 533-536 4 p. 8890353. (Proceedings - IEEE 17th International Conference on Dependable, Autonomic and Secure Computing, IEEE 17th International Conference on Pervasive Intelligence and Computing, IEEE 5th International Conference on Cloud and Big Data Computing, 4th Cyber Science and Technology Congress, DASC-PiCom-CBDCom-CyberSciTech 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on the sense of burden and body ownership on virtual slope

  Shimamura, R., Kayukawa, S., Nakatsuka, T., Miyakawa, S. & Morishima, S., 2019 Mar, 26th IEEE Conference on Virtual Reality and 3D User Interfaces, VR 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1154-1155 2 p. 8797960. (26th IEEE Conference on Virtual Reality and 3D User Interfaces, VR 2019 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on the speed of top-down and bottom-up DF-encoding/decoding algorithms for binary pictures

  Kawaguchi, E., Hirano, H. & Kamata, S., 1992 Jan 1, IAPR 1992 - 11th IAPR International Conference on Pattern Recognition: Image, Speech, and Signal Analysis. Institute of Electrical and Electronics Engineers Inc., p. 577-581 5 p. 202053. (Proceedings - International Conference on Pattern Recognition; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A Study on the Tenacity of Coastal Dikes Constructed by Clay and Lean Cement Mixed Soil against Tsunami Overflow

  Honda, T., Oda, Y., Ito, K., Ishii, H. & Takabatake, T., 2015 Jan 1, Coastal Structures and Solutions to Coastal Disasters 2015: Tsunamis - Proceedings of the Coastal Structures and Solutions to Coastal Disasters Joint Conference 2015. American Society of Civil Engineers (ASCE), p. 118-127 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on the transmission power in dynamic contactless power transmission

  Shibata, S., Wijaya, F. P. & Kondo, K., 2016 May 19, Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc., p. 245-250 6 p. 7474759. (Proceedings of the IEEE International Conference on Industrial Technology; vol. 2016-May).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on the "zone experience" of leading artists through kansei analysis

  Shiki, Y. & Fukubayashi, T., 2013, AAAI Spring Symposium - Technical Report. Vol. SS-13-03. p. 71-77 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on time evolution method for hyperbolic navier-stokes system

  Nagao, T., Hashimoto, A. & Sato, T., 2018, AIAA Aerospace Sciences Meeting. 210059 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Aerospace Sciences Meeting, 2018; no. 210059).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on torelance design of five-axis machining centers

  Takematsu, R., Satonaka, N., Sugimura, N., Iwamura, K., Thinh, N. Q. & Tanimizu, Y., 2016 Dec 16, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 348-351 4 p. 7790186

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on traffic accident measures in municipal roads by using GIS

  Funamoto, S., Van Nham, N., Morimoto, A. & Koike, H., 2019, EG-ICE 2010 - 17th International Workshop on Intelligent Computing in Engineering. Tizani, W. (ed.). Nottingham, (EG-ICE 2010 - 17th International Workshop on Intelligent Computing in Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on transmission of RF signals over a turbulent free space optical link

  Dat, P. T., Shah, A. M., Kazaura, K., Wakamori, K., Suzuki, T., Takahashi, K., Matsumoto, M., Aburakawa, Y., Nakamura, T., Higashino, T., Tsukamoto, K. & Komaki, S., 2008, 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008. p. 173-176 4 p. 4666664

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)

• A study on transmission planning prioritization using multi-objective evaluation

  Sakakibara, E., Matsushita, K. & Iwamoto, S., 2009, 2009 IEEE Power and Energy Society General Meeting, PES '09. 5275520

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on transportation processes of autonomous distributed AGV based on social force model

  Iwamura, K., Chen, J., Tanimizu, Y. & Sugimura, N., 2016 Dec 16, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 206-209 4 p. 7790162

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on two-layer coding for animation images

  Nakagami, O., Miyazwa, T., Watanabe, H. & Tominaga, H., 2002, Proceedings - 2002 IEEE International Conference on Multimedia and Expo, ICME 2002. Institute of Electrical and Electronics Engineers Inc., p. 621-624 4 p. 1035858. (Proceedings - 2002 IEEE International Conference on Multimedia and Expo, ICME 2002; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)