Find Research outputs

Search results

• Conference contribution

  Development of polyglycolic and polylactic acid fluid-loss control materials for fracturing fluids

  Yoshimura, K., Matsui, H. & Morita, N., 2014, SPE - European Formation Damage Conference, Proceedings, EFDC. Society of Petroleum Engineers (SPE), Vol. 2. p. 722-745 24 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of polymer electrolytes based resistive switch

  Wu, S., Tsuruoka, T., Terabe, K., Hasegawa, T., Hill, J. P., Ariga, K. & Aono, M., 2009 Dec 22, 2nd International Conference on Smart Materials and Nanotechnology in Engineering. 749364. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7493).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of positioning technique using omni-directional IR camera and aerial survey data

  Meguro, J. I., Murata, T., Nishimura, H., Amano, Y., Hasizume, T. & Takiguchi, J. I., 2007, 2007 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. 4412464. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Development of positive electrode materials for the high rate lithium ion battery by nanostructure control

  Hosono, E., Matsuda, H., Okubo, M., Kudo, T., Fujihara, S., Honma, I. & Zhou, H., 2010, Electroceramics in Japan XIII. Trans Tech Publications Ltd, p. 109-112 4 p. (Key Engineering Materials; vol. 445).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of Postures Estimation System for Walking Training

  Zheng, Z., Li, X. & Tateno, S., 2019 Jan 9, 2018 International Automatic Control Conference, CACS 2018. Institute of Electrical and Electronics Engineers Inc., 8606746. (2018 International Automatic Control Conference, CACS 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of prediction-based operation planning method for domestic air-conditioner with adaptive learning of installation environment

  Kuroha, R., Fujimoto, Y., Hirohashi, W., Amano, Y., Tanabe, S. & Hayashi, Y., 2017 Oct 26, 2017 IEEE Power and Energy Society Innovative Smart Grid Technologies Conference, ISGT 2017. Institute of Electrical and Electronics Engineers Inc., 8085983

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of pressure sensitive molecular film as a measurement technique for micro-and nano-devices

  Mori, H., Matsuda, Y., Niimi, T., Uenishi, H. & Sakazaki, Y., 2006, 2006 IEEE International Symposium on Micro-Nano Mechanical and Human Science, MHS. 4110414. (2006 IEEE International Symposium on Micro-Nano Mechanical and Human Science, MHS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of pressure sensitive molecular film suitable for measurement in high knudsen number flows

  Mori, H., Matsuda, Y., Yamaguchi, H., Sakazaki, Y., Uchida, T. & Niimi, T., 2007 Dec 1, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 53-58 6 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of proactive and reactive behavior via meta-learning of prediction error variance

  Murata, S., Namikawa, J., Arie, H., Tani, J. & Sugano, S., 2013 Dec 1, Neural Information Processing - 20th International Conference, ICONIP 2013, Proceedings. PART 1 ed. p. 537-544 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8226 LNCS, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of pulsed-laser super-cavity for compact X-ray source based on laser-compton scattering

  Sakaue, K., Washio, M., Araki, S., Fukuda, M., Higashi, Y., Honda, Y., Taniguchi, T., Terunuma, N., Urakawa, J., Sasao, N., Yokoyama, H. & Takano, M., 2007, Proceedings of the IEEE Particle Accelerator Conference, PAC07. p. 1034-1036 3 p. 4440973. (Proceedings of the IEEE Particle Accelerator Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Development of quadruped animaroid for social interaction test with rats and mice

  Ishii, H., Komura, A., Masuda, Y., Miyagishima, S., Takanishi, A., Okabayashi, S., Iida, N. & Kimura, H., 2009 Nov 4, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2009. p. 1724-1729 6 p. 5229804. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Development of radiation-hardened multi pixel photon counters

  Nakamori, T., Kurei, Y., Takeuchi, K., Saito, T., Kataoka, J., Fujita, T., Kato, T., Sato, K., Yamada, R., Kawabata, N. & Kokubun, M., 2013, Proceedings of the 33rd International Cosmic Rays Conference, ICRC 2013. Sociedade Brasileira de Fisica, (Proceedings of the 33rd International Cosmic Rays Conference, ICRC 2013; vol. 2013-October).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of radio on free space optics system for ubiquitous wireless

  Tsukamoto, K., Higashino, T., Nakamura, T., Takahashi, K., Aburakawa, Y., Komaki, S., Wakamori, K., Suzuki, T., Kazaura, K., Shah, A. M., Omae, K. & Matsumoto, M., 2008, Progress in Electromagnetics Research Symposium. Electromagnetics Academy, Vol. 1. p. 423-427 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Development of real-time simulation for workload quantization in robotic tele-surgery

  Kawamura, K., Kobayashi, Y. & Fujie, M. G., 2006, 2006 IEEE International Conference on Robotics and Biomimetics, ROBIO 2006. p. 1420-1425 6 p. 4142074

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  11 Citations (Scopus)

• Development of registration marker for CT-guided needle insertion robot

  Inoue, S., Tsumura, R. & Iwata, H., 2017 Aug 21, 2017 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2017. Institute of Electrical and Electronics Engineers Inc., p. 755-760 6 p. 8014108. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of residential monitoring system by measuring fixtures acceleration

  Kato, M., Shimodaira, Y. & Sato, T., 2011 Dec 1, Proceedings of the IADIS International Conference Interfaces and Human Computer Interaction 2011, Part of the IADIS Multi Conference on Computer Science and Information Systems 2011, MCCSIS 2011. p. 492-494 3 p. (Proceedings of the IADIS International Conference Interfaces and Human Computer Interaction 2011, Part of the IADIS Multi Conference on Computer Science and Information Systems 2011, MCCSIS 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Development of robot assisted measurement system for abdominal ultrasound diagnosis

  Nakadate, R., Tokunaga, Y., Solis, J., Takanishi, A., Minagawa, E., Sugawara, M., Niki, K. & Saito, A., 2010, 2010 3rd IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics, BioRob 2010. p. 367-372 6 p. 5627716. (2010 3rd IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics, BioRob 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  16 Citations (Scopus)

• Development of robotic assistive surgery system for anterior cruciate ligament reconstruction

  Hirabayashi, M., Hayashi, N., Okamoto, J., Fujie, M. G., Muratsu, H. & Kurosaka, M., 2006, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. Vol. 2006. p. 147-152 6 p. 1639075

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of robotic experimental system for behavior analysis of rodents

  Ishii, H., Ogura, M., Kurisu, S. & Takanishi, A., 2006 Dec 22, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. p. 739-743 5 p. 1639178. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Development of robotic fingertip morphology for enhanced manipulation stability

  Or, K., Schmitz, A., Funabashi, S., Tomura, M. & Sugano, S., 2016 Sep 26, 2016 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016. Institute of Electrical and Electronics Engineers Inc., p. 25-30 6 p. 7576738. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2016-September).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Development of Robotic Rollators and Walking Trolleys in Japan

  Matsumoto, O., 2017, Harnessing the Power of Technology to Improve Lives. Cudd, P. & de Witte, L. (eds.). IOS Press, p. 457-464 8 p. (Studies in Health Technology and Informatics; vol. 242).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Development of robotic strawberry harvester to approach target fruit from hanging bench side

  Yamamoto, S., Hayashi, S., Saito, S., Ochiai, Y., Yamashita, T. & Sugano, S., 2010, IFAC International Conference AGRICONTROL 2010, Proceedings. PART 1 ed. IFAC Secretariat, (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 3, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)

• Development of robotic upper limb orthosis with tremor suppressiblity and elbow joint movability

  Seki, M., Matsumoto, Y., Ando, T., Kobayashi, Y., Fujie, M. G., Iijima, H. & Nagaoka, M., 2011, Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics. p. 729-735 7 p. 6083728

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)

• Development of robot simulator for interactive training of neonatal cardio-pulmonary resuscitation

  Takebe, Y., Imamura, K., Sugamiya, Y., Nakae, Y., Katayama, T., Otani, T., Ishii, H. & Takanishi, A., 2021 Aug 8, 2021 30th IEEE International Conference on Robot and Human Interactive Communication, RO-MAN 2021. Institute of Electrical and Electronics Engineers Inc., p. 1230-1235 6 p. (2021 30th IEEE International Conference on Robot and Human Interactive Communication, RO-MAN 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of roll-over support system with EMG control for cancer bone metastasis patients

  Ando, T., Okamoto, J. & Fujie, M. G., 2007, Proceedings - IEEE International Conference on Robotics and Automation. p. 1244-1249 6 p. 4209259

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Development of roll press UV imprint process for replication of micro lens array on the large and thin quartz substrate

  Li, L., Ishii, K., Tsutsui, Y., Shoji, S. & Mizuno, J., 2012 Jun 1, 2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2012. p. 27-30 4 p. 6196715. (2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of rotating stall cell under coexisting phenomena of surge and rotating stall in an axial-flow compressor

  Sakata, Y., Ando, S., Fujisawa, N. & Ohta, Y., 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 5310. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3A-2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of safety assist system for ultra-small EV - Efforts for safe mobility in Kitakyushu aging society

  Ogai, H., Kamata, S., Wu, N., Ishi, T., Uchida, A., Kai, M. & Iida, M., 2013, 20th ITS World Congress Tokyo 2013. Intelligent Transportation Society of America

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Development of scrub nurse robot (SNR) systems for endoscopic and laparoscopic surgery

  Yoshimitsu, K., Masamune, K., Iseki, H., Fukui, Y., Hashimoto, D. & Miyawaki, F., 2010 Dec 1, 2010 International Symposium on Micro-NanoMechatronics and Human Science: From Micro and Nano Scale Systems to Robotics and Mechatronics Systems, MHS 2010, Micro-Nano GCOE 2010, Bio-Manipulation 2010. p. 83-88 6 p. 5669574. (2010 International Symposium on Micro-NanoMechatronics and Human Science: From Micro and Nano Scale Systems to Robotics and Mechatronics Systems, MHS 2010, Micro-Nano GCOE 2010, Bio-Manipulation 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Development of self-resonating enhancement cavity operating in single-longitudinal-mode

  Uesugi, Y., Aryshev, A. S., Fukuda, M., Omori, T., Terunuma, N., Urakawa, J., Takahashi, T., Koshiba, Y., Otsuka, S., Washio, M., Hosaka, Y. & Sato, S., 2020, CLEO: Applications and Technology, CLEO_AT 2020. OSA - The Optical Society, JW2B.10. (Optics InfoBase Conference Papers; vol. Part F181-CLEO-AT 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of Self-Resonating Enhancement Cavity Operating in Single-Longitudinal-Mode

  Uesugi, Y., Aryshev, A. S., Fukuda, M., Omori, T., Terunuma, N., Urakawa, J., Takahashi, T., Koshiba, Y., Otsuka, S., Washio, M., Hosaka, Y. & Sato, S., 2020 May, 2020 Conference on Lasers and Electro-Optics, CLEO 2020 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 9192869. (Conference Proceedings - Lasers and Electro-Optics Society Annual Meeting-LEOS; vol. 2020-May).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of semi-actively controlled damper for improving microgravity environment

  Watanabe, K. & Yamakawa, H., 2004, Collection of Technical Papers - 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Vol. 4. p. 2198-2203 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of sensing system for carbonaceous particles using LIBS combined with LII temporal analytical technique

  Ikezawa, S., Wakamatsu, M., Zimin, Y. & Ueda, T., 2010, Proceedings of IEEE Sensors. p. 1299-1304 6 p. 5690581

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of sensor system for effective evaluation of surgical skill

  Aizuddin, M., Oshima, N., Midorikawa, R. & Takanishi, A., 2006 Dec 22, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. p. 678-683 6 p. 1639168. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)

• Development of sequential prediction system for Large scale database-based Online Modeling

  Ogawa, M., Yichun, Y., Ogai, H. & Uchida, K., 2007 Dec 1, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 1456-1459 4 p. 4406568. (ICCAS 2007 - International Conference on Control, Automation and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Development of shape memory alloy driven small legged robot capable of walking on a flat ground and climbing a leaning tree

  Ishibashi, K., Takanishi, A. & Ishii, H., 2019 Jul, Proceedings of the 2019 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2019. Institute of Electrical and Electronics Engineers Inc., p. 352-357 6 p. 8868924. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2019-July).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of shintake beam size monitor for ATF2

  Kamiya, Y., Komamiya, S., Oroku, M., Suehara, T., Yamaguchi, Y., Yamanaka, T., Araki, S., Okugi, T., Tauchi, T., Terunuma, N. & Urakawa, J., 2010 Dec 1, IPAC 2010 - 1st International Particle Accelerator Conference. p. 1011-1013 3 p. (IPAC 2010 - 1st International Particle Accelerator Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of short-range frequent-recharging small Electric Vehicle equipped with non-contact inductive power supply system

  Kamiya, Y., Nagano, S., Nabeta, M., Ihara, Y., Daisho, Y., Takahashi, S. & Sato, T., 2009, 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition 2009, EVS 24. p. 175-180 6 p. (24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition 2009, EVS 24; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of simple measurement method for chemical emission rates

  Kubota, K., Ishikawa, Y., Hasegawa, A. & Tanabe, S., 2006, HB 2006 - Healthy Buildings: Creating a Healthy Indoor Environment for People, Proceedings. p. 49-54 6 p. (HB 2006 - Healthy Buildings: Creating a Healthy Indoor Environment for People, Proceedings; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of software-defined acoustic communication platform and its evaluations

  Kato, R. & Katto, J., 2015 Jun 17, 2015 IEEE Wireless Communications and Networking Conference, WCNC 2015. Institute of Electrical and Electronics Engineers Inc., p. 1753-1758 6 p. 7127733

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Development of soft x-ray large solid angle camera onboard WF-MAXI

  Kimura, M., Tomida, H., Ueno, S., Kawai, N., Yatsu, Y., Arimoto, M., Mihara, T., Serino, M., Tsunemi, H., Yoshida, A., Sakamoto, T., Kohmura, T. & Negoro, H., 2014, Space Telescopes and Instrumentation 2014: Ultraviolet to Gamma Ray. SPIE, Vol. 9144. 914460

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of soft x-ray laser irradiation beamline for ablation and damage study

  Ishino, M., Dinh, T. H., Hasegawa, N., Sakaue, K., Higashiguchi, T., Ichimaru, S., Hatayama, M., Washio, M. & Nishikino, M., 2019, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV. Makimura, T., Raciukaitis, G. & Molpeceres, C. (eds.). SPIE, 109051C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10905).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of solution algorithm and sensitivity analysis for random fuzzy portfolio selection model

  Hasuike, T. & Katagiri, H., 2010 Dec 13, IAENG Transactions on Engineering Technologies Volume 5 - Special Edition of the International MultiConference of Engineers and Computer Scientists 2010. p. 59-70 12 p. (AIP Conference Proceedings; vol. 1285).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of space telescope mirror made by light and thermally stable CFRP

  Koyanagi, J., Arao, Y., Terada, H., Utsunomiya, S., Takeda, S. I. & Kawada, H., 2010 Dec 1, Fourth International Conference on Experimental Mechanics. 75223L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7522).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Development of state transition model and speech recognition module for training of neurological examination

  Sugamiya, Y., Matsunaga, K., Wang, C., Tokunaga, S., Kawasaki, S., Ishii, H., Nakae, Y., Katayama, T. & Takanishi, A., 2014 Apr 20, 2014 IEEE International Conference on Robotics and Biomimetics, IEEE ROBIO 2014. Institute of Electrical and Electronics Engineers Inc., p. 1124-1129 6 p. 7090483. (2014 IEEE International Conference on Robotics and Biomimetics, IEEE ROBIO 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of stereoscopic alphabet literacy learning system for children with developmental dyslexia

  Yamazoe, H., Kawai, T., Yamagata, H., Niinuma, K., Ono, Y. & Miyao, M., 2010 Sep 10, CSEDU 2010 - 2nd International Conference on Computer Supported Education, Proceedings. p. 454-457 4 p. (CSEDU 2010 - 2nd International Conference on Computer Supported Education, Proceedings; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of supporting system for know-how information extraction by several users' viewpoint

  Eto, K., Matsui, T. & Kabasawa, Y., 2007 Dec 1, 15th International Conference on Computers in Education: Supporting Learning Flow through Integrative Technologies, ICCE 2007. (15th International Conference on Computers in Education: Supporting Learning Flow through Integrative Technologies, ICCE 2007).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of tactile map production device and tactile map with multilingual vocal guidance function

  Doi, K., Toyoda, W. & Fujimoto, H., 2010, ASSETS'10 - Proceedings of the 12th International ACM SIGACCESS Conference on Computers and Accessibility. p. 255-256 2 p. (ASSETS'10 - Proceedings of the 12th International ACM SIGACCESS Conference on Computers and Accessibility).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Development of teaching materials for SI engine control exercise

  Ogawa, M., Wu, D., Yeh, Y., Ogai, H. & Kusaka, J., 2009 Dec 1, 8th IFAC Symposium on Advances in Control Education, ACE 2009. PART 1 ed. p. 59-64 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 8, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of technologies for eliminating high-level noise emitting vehicles on Japanese roads

  Ishihama, M., Kaneko, S., Kamata, M., Tanaka, T. & Sakamoto, I., 2009 Sep 18, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008. p. 239-246 8 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 17).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)