Find Research outputs

Search results

• Article

  STUDY ON FACILITIES LOCATION USING THE PROPERTIES OF CUT SET MATRIX.

  Nakai, S., Watanabe, S., Yoshimoto, K. & Tabuchi, Y., 1980, In: Bulletin of the JSME. 23, 183, p. 1552-1557 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• STUDY ON FACILITIES LOCATION WITH TIE SET.

  Nakai, S. & Yoshimoto, K., 1980, In: Bulletin of the JSME. 23, 182, p. 1396-1401 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on failure criterion of FRP bent rods

  Kanematsu, H., Sato, Y., Imamura, A. & Ueda, T., 1994 Dec 1, In: Transactions of the Japan Concrete Institute. 16, p. 205-210 6 p.

  Research output: Contribution to journal › Article › peer-review

• Study on failure modes of steel truss bridge gusset plates related to tension and shear block failure

  Kasano, H., Yoda, T., Nogami, K., Murakoshi, J., Toyama, N., Sawada, M., Arimura, K. & Guo, L., 2012 Sept, In: International Journal of Steel Structures. 12, 3, p. 381-389 9 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Study on flame height of merged flame from multiple fire sources

  Weng, W. G., Kamikawa, D., Fukuda, Y., Hasemi, Y. & Kagiya, K., 2004 Dec, In: Combustion Science and Technology. 176, 12, p. 2105-2123 19 p.

  Research output: Contribution to journal › Article › peer-review
  67 Citations (Scopus)

• STUDY on FLOW and CONGESTION in STAIRCASES during PHASED EVACUATION in A HIGH-RISE BUILDING: Analysis based on the observational data of a real total evacuation drill

  Kadokura, H., Sekizawa, A., Sano, T. & Fujii, K., 2015, In: Journal of Environmental Engineering (Japan). 80, 716, p. 849-856 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on flow instability and countermeasure in a draft tube with swirling flow

  Nakashima, T., Matsuzaka, R., Miyagawa, K., Yonezawa, K. & Tsujimoto, Y., 2015, In: International Journal of Fluid Machinery and Systems. 8, 4, p. 230-239 10 p., A02.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Study on freezing process of killifish egg: utilizing the undercooled state for cryopreservation.

  Ujihira, M., Aizawa, N. & Tanishita, K., 1994, In: Bio-Medical Materials and Engineering. 4, 2, p. 115-125 11 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on functionally gradient proton exchange membrane fabricated by EB irradiation with heterogeneous energy deposition

  Fujita, H., Shiraki, F., Yoshikawa, T., Oshima, A. & Washio, M., 2010, In: Journal of Photopolymer Science and Technology. 23, 3, p. 387-392 6 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Study on gas seal configuration for molten carbonate fuel cells

  Nakagaki, T., Nameki, H., Hirata, H. & Hori, M., 1997 Dec 1, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 63, 616, p. 241-246 6 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Growth Process of Ag(In, Ga)Se2 Films by a Three-Stage Co-Evaporation Method Using Molecular Beam Epitaxy Apparatus

  Zhang, X. & Kobayashi, M., 2017 Apr, In: IEEE Photonics Journal. 9, 2, 7858727.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on Heat Pipe: 3rd Report, Heat Transfer Mechanism in the Evaporator with Screen Mesh Wick

  Morooka, S., Kuroki, T. & Waki, T., 1981 Jan 1, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 47, 414, p. 351-360 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• STUDY ON HEAT PIPE - 2. HEAT TRANSFER MECHANISM IN THE EVAPORATOR ZONE OF HEAT PIPE.

  Shibayama, S. & Morooka, S., 1979 Sept, In: Bulletin of the JSME. 22, 171, p. 1243-1250 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Study on heredity and evolution of designs by using genetic algorithms

  Yamakawa, H., 1995 Dec, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 61, 592, p. 4646-4652 7 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Study on high-speed twin-roll caster for aluminum alloys

  Haga, T. & Suzuki, S., 2003 Dec 20, In: Journal of Materials Processing Technology. 143-144, 1, p. 895-900 6 p.

  Research output: Contribution to journal › Article › peer-review
  37 Citations (Scopus)

• Study on how to use alumni network as mentor platform in entrepreneurial and incubation process for university start-ups with technology seeds

  Maki, K., Miyachi, E. & Kabasawa, S., 2011 Mar, In: Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers. 65, 3, p. 395-402 8 p.

  Research output: Contribution to journal › Article › peer-review

• Study on hybrid au-underfill resin bonding method with lock-and-key structure for 3-D integration

  Nimura, M., Mizuno, J., Shigetou, A., Sakuma, K., Ogino, H., Enomoto, T. & Shoji, S., 2013, In: IEEE Transactions on Components, Packaging and Manufacturing Technology. 3, 4, p. 558-565 8 p., 6449300.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Study on ice storage system in advanced co-generation system on the operational planning

  Tomizawa, M., Takeshita, K., Amano, Y., Hashizume, T. & Akiba, M., 2003 Apr, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 69, 680, p. 888-893 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on identification of structural system and optimum design by neural network

  Watari, S. & Yamakawa, H., 1995 Nov, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 61, 591, p. 4238-4244 7 p.

  Research output: Contribution to journal › Article › peer-review

• Study on improvement for the prediction accuracy of natural circulation flow rate by investigating void fraction correlation

  Yoshimura, S., Yamaguchi, T., Ino, K., Furuya, M. & Morooka, S., 2021 Aug 15, In: Nuclear Engineering and Design. 380, 111293.

  Research output: Contribution to journal › Article › peer-review

• Study on improvement of leidenfrost and quenching properties by radiation induced surface activation

  Takamasa, T., Hazuku, T., Fukuhara, Y., Tamura, N., Takano, M., Hayashi, T., Okamoto, K., Imai, Y., Furuya, M., Mishima, K. & Hibiki, T., 2004 Apr 1, In: KURRI Progress Report. 1 p., 3.01.

  Research output: Contribution to journal › Article › peer-review

• Study on interaction between coal and model plastics during liquid-phase catalytic coliquefaction

  Yamaguchi, H., Okuyama, Y., Matsubara, K., Bi, J., Kodera, Y., Kamo, T. & Sato, Y., 1998, In: ACS Division of Fuel Chemistry, Preprints. 43, 3, p. 707-709 3 p.

  Research output: Contribution to journal › Article › peer-review

• Study on landscape recognition that uses image processing technology by local inhabitants in Kamakura

  Yamada, S., Shintani, N. & Ohuchi, H., 2009 May 16, In: Journal of Asian Architecture and Building Engineering. 8, 1, p. 151-158 8 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on learning strategies in elementary school physical education

  Kaji, M. & Ono, Y., 2021 Nov, In: Journal of Physical Education and Sport. 21, p. 3211-3217 7 p., 439.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on likelihood-ratio-based multivariate EWMA control chart using Lasso

  Saruhashi, T., Ohkubo, M. & Nagata, Y., 2021, In: Quality Innovation Prosperity. 25, 1, p. 3-15 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on load distribution and ball motion of ball screw

  Yoshida, T., Tozaki, Y. & Matsumoto, S., 2003, In: Toraibarojisuto/Journal of Japanese Society of Tribologists. 48, 8 SPEC ISS., p. 659-666 8 p.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Study on load distribution and ball motion of ball screw

  Yoshida, T., Tozaki, Y. & Matsumoto, S., 2003, In: Japanese Journal of Tribology. 48, 4, p. 383-396 14 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on making Klima-atlas with citizen participation: - Walking tour with citizens to experience and measure the urban thermal environment

  Masuda, Y., Okadome, S., Kagiya, K., Takaguchi, H., Takahashi, N. & Ojima, T., 2010 Feb, In: AIJ Journal of Technology and Design. 16, 32, p. 215-219 5 p.

  Research output: Contribution to journal › Article › peer-review

• Study on medical economic evaluation methods for metastatic brain tumors therapy

  Takura, T., Hayashi, M., Muragaki, Y., Iseki, H. & Uetsuka, Y., 2010 Jul, In: Neurological Surgery. 38, 7, p. 629-637 9 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on method to simulate light propagation on tissue with characteristics of radial-beam LED based on Monte-Carlo method

  Song, S., Elgezua, I., Kobayashi, Y. & Fujie, M. G., 2013, In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. 2013, p. 25-28 4 p.

  Research output: Contribution to journal › Article › peer-review

• Study on minimum energy collision-free trajectory planning for rigid manipulators

  Lee, S. J. & Yamakawa, H., 1998 Mar, In: JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Manufacturing. 41, 1, p. 101-107 7 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Study on minimum-energy collision-free trajectory planning for rigid manipulators

  Lee, S. J. & Yamakawa, H., 1997 Jun, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 63, 610, p. 2030-2036 7 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on N₂-added and B-doped effect in Co/Pd multilayered films using soft x-ray absorption and magnetic circular dichroism

  Agui, A., Asahi, T., Sayama, J., Kawaji, J., Mizumaki, M., Tanaka, M. & Osaka, T., 2006 Jul 21, In: Journal of Physics D: Applied Physics. 39, 14, p. 2881-2885 5 p., 001.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Study on non-liner numerical simulation of vibration of power transmission gear system (1st report, application of modal synthesis method to 500 kW class planetary gears)

  Shoda, K., Matsumoto, S., Furukawa, T., Tozaki, Y., Iwanaga, Y. & Matsunami, Y., 2004 Sept, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 70, 9, p. 2715-2722 8 p.

  Research output: Contribution to journal › Article › peer-review

• Study on non-liner numerical simulation of vibration of power transmission gear system (2nd report, non-liner dynamic characteristics of stiffness and damping of gear coupling)

  Shoda, K., Matsumoto, S., Furukawa, T., Tozaki, Y., Umeda, A. & Takahashi, S., 2005 Apr, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 71, 4, p. 1153-1160 8 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on non-liner numerical simulation of vibration of power transmission gear system 3rd report, vibration model of gear pair in consideration of oil film force

  Shoda, K., Matsumoto, S., Furukawa, T., Tozaki, Y., Sakaguchi, K. & Yoshida, T., 2006, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 72, 5, p. 1446-1453 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Study on oil film analysis of the stern tube bearing under the conditions of dynamic propeller shaft forces comparison between theory and measurement results of full-scale ship propeller shaft center loci

  Takahashi, S., Matsumoto, S., Tateishi, T., Ohyama, K., Kuroiwa, R. & Morohoshi, S., 2009 Nov, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 75, 759, p. 3054-3061 8 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on optimal design of a folding-type hatch cover considering material selection

  Putra, G. L., Kitamura, M. & Takezawa, A., 2021, In: Journal of Ship Production and Design. 37, 4, p. 237-247 11 p.

  Research output: Contribution to journal › Article › peer-review

• STUDY ON OPTIMUM STRUCTURAL DESIGN PROBLEMS IN DYNAMIC RESPONSE.

  Yamakawa, H., 1982, In: Memoirs of the School of Science and Engineering, Waseda University. 46, p. 27-47 21 p.

  Research output: Contribution to journal › Article › peer-review

• Study on PEFC membrane based on crosslinked FEP using EB-grafting

  Matsuura, A., Kakigi, T., Sato, Y., Fujii, K., Mitani, N., Li, J., Oshima, A. & Washio, M., 2007 Aug 1, In: Macromolecular Symposia. 249-250, p. 221-227 7 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Study on phonon lifetime in bulk silicon-germanium through observation of acoustic phonon spectra broadening by inelastic x-ray scattering

  Yokogawa, R., Arai, Y., Yonenaga, I., Tomita, M., Chung, S. Y. Y., Uchiyama, H., Watanabe, T. & Ogura, A., 2022 Aug 22, In: Applied Physics Letters. 121, 8, 082105.

  Research output: Contribution to journal › Article › peer-review

• Study on Photoacoustic Measurement Technique of Thermophysical Properties of Thick Solid Material and Human Skin

  Yoshida, A., Imuta, A., Yamada, T. & Kagata, K., 2014 Nov 26, In: International Journal of Thermophysics. 35, 12, p. 2226-2236 11 p.

  Research output: Contribution to journal › Article › peer-review

• Study on photomagnetism of 2-D magnetic compounds coupled with photochromic diarylethene cations

  Okubo, M., Enomoto, M. & Kojima, N., 2005 Sept 20, In: Synthetic Metals. 152, 1-3, p. 461-464 4 p.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Study on pool boiling and flow boiling with artificial neural networks

  Chen, R. H., Su, G. H. & Qiu, S. Z., 2010 May, In: Hedongli Gongcheng/Nuclear Power Engineering. 31, SUPPL. 1, p. 49-52 4 p.

  Research output: Contribution to journal › Article › peer-review

• Study on positive-negative inversion of chlorinated resist materials

  Oyama, T. G., Oshima, A., Yamamoto, H., Tagawa, S. & Washio, M., 2011 Jul, In: Applied Physics Express. 4, 7, 076501.

  Research output: Contribution to journal › Article › peer-review
  18 Citations (Scopus)

• Study on post-BT heat transfer in a full scale bwr (8 × 8) rod bundle

  Akiyama, M., Inoue, A., Ohishi, M., Morooka, S., Hoshide, A., Ishizuka, T. & Yoshimura, K., 1989, In: Nuclear Engineering and Design. 117, 3, p. 341-347 7 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• STUDY ON PROCESS OF DIRECT INJECTION STRATIFIED CHARGE COMBUSTION IN A CONSTANT-VOLUME VESSEL.

  Choi, K. H., Daisho, Y. & Saito, T., 1988 Jan, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 54, 497, p. 185-189 5 p.

  Research output: Contribution to journal › Article › peer-review

• Study on process planning system for holonic manufacturing (3rd report, process planning considering machining schedules)

  Sugimura, N., Shrestha, R., Tanimizu, Y. & Iwamura, K., 2004 Aug, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 70, 8, p. 2469-2475 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Study on reactive sputtering to deposit transparent conductive amorphous In₂O₃-ZnO films using an In-Zn alloy target

  Tsukamoto, N., Sensui, S., Jia, J., Oka, N. & Shigesato, Y., 2014 May 30, In: Thin Solid Films. 559, p. 49-52 4 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Study on relationship between technostress and antisocial behavior on computers

  Kasuga, N., Itoh, K., Oishi, S. & Nagashima, T., 2004 Jun, In: IEICE Transactions on Information and Systems. E87-D, 6, p. 1461-1465 5 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)