Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016

Author

  • Shinsuke Suzuki
2019

Compressive properties of A2024 alloy foam fabricated through a melt route and a semi-solid route

Kuwahara, T., Osaka, T., Saito, M. & Suzuki, S., 2019 Jan 1, In : Metals. 9, 2, 153.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Effect of primary crystals on pore morphology during semi-solid foaming of A2024 alloys

Kuwahara, T., Saito, M., Osaka, T. & Suzuki, S., 2019 Jan 1, In : Metals. 9, 1, 88.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Effects of TiC Addition on Directionally Solidified Microstructure of Ti6Al4V

Yamamoto, S., Date, N., Mori, Y., Suzuki, S., Watanabe, Y., Nakano, S. & Sato, N., 2019 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

Fabrication of porous metals with unidirectionally aligned pores by rod-dipping process

Muto, D., Yoshida, T., Tamai, T., Sawada, M. & Suzuki, S., 2019 Jan 1, In : Materials Transactions. 60, 4, p. 544-553 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Melting and solidification behavior of Ti-6Al-4V powder during selective laser melting

Yamamoto, S., Azuma, H., Suzuki, S., Kajino, S., Sato, N., Okane, T., Nakano, S. & Shimizu, T., 2019 Jan 1, In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Microstructures and mechanical properties of fiber textures forming mesoscale structure of drawn fine high carbon steel wire

Gondo, S., Tanemura, R., Suzuki, S., Kajino, S., Asakawa, M., Takemoto, K. & Tashima, K., 2019 Feb 18, In : Materials Science and Engineering A. 747, p. 255-264 10 p.

Research output: Contribution to journalArticle

Oxidation Resistance Improvement of Ni-Base Single-Crystal Superalloy Melted in a CaO Crucible

Sugiyama, T., Utada, S., Yokokawa, T., Osawa, M., Kawagishi, K., Suzuki, S. & Harada, H., 2019 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground

Fukuda, H., Shiinoki, M., Nishimura, Y. & Suzuki, S., 2019 Apr 1, In : International Journal of Heat and Mass Transfer. p. 531-541 11 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2018

Analysis Method Using Two-Wavelength Mach-Zehnder Interferometer for the Measurement of Soret Coefficients in Soret-Facet Mission on ISS

Tomaru, M., Osada, T., Orikasa, I., Suzuki, S. & Inatomi, Y., 2018 Jan 1, (Accepted/In press) In : Microgravity Science and Technology.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Correction to: Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Sugiyama, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2018 Jul 12, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1 p.

Research output: Contribution to journalArticle

Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Sugiyama, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2018 Jun 28, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-13 13 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software

Murasawa, K., Takamura, M., Kumagai, M., Ikeda, Y., Suzuki, H., Otake, Y., Hama, T. & Suzuki, S., 2018 Jan 1, In : Materials Transactions. 59, 7, p. 1135-1141 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Directionally-solidified dendrite morphology with eight secondary arms in an FCC ordered phase alloy

Mori, Y., Harada, H., Yokokawa, T., Kobayashi, T. & Suzuki, S., 2018 Oct 15, In : Journal of Crystal Growth. 500, p. 15-22 8 p.

Research output: Contribution to journalArticle

Effect of cementite dispersion on void formation process in spheroidize-annealed steels

Maeda, M., Shimamura, J. & Suzuki, S., 2018 Aug 15, In : ISIJ International. 58, 8, p. 1490-1499 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Establishing a simple and reliable method of measuring ductility of fine metal wire

Gondo, S., Suzuki, S., Asakawa, M., Takemoto, K., Tashima, K. & Kajino, S., 2018 Dec 1, In : International Journal of Mechanical and Materials Engineering. 13, 1, 5.

Research output: Contribution to journalArticle

2 Citations (Scopus)
1 Citation (Scopus)

Investigation on Stress Relaxation Behavior of High-Strength Steel Sheets Based on Elasto-viscoplasticity

Takamura, M., Murasawa, K., Kusuda, Y., Suzuki, Y., Hakoyama, T., Ikeda, Y., Otake, Y., Hama, T. & Suzuki, S., 2018 Aug 6, In : Journal of Physics: Conference Series. 1063, 1, 12123.

Research output: Contribution to journalConference article

Reduction of Cracks During Punching Process by Cementite in High Tensile Strength Steel Sheets

Okano, T., Inoue, C., Suzuki, S., Yamazaki, K. & Toyoda, S., 2018 Jan 1, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

Research output: Contribution to journalArticle

Self-diffusion Measurements of Liquid Sn Using the Shear Cell Technique and Stable Density Layering

Shiinoki, M., Hashimoto, N., Fukuda, H., Ando, Y. & Suzuki, S., 2018 Jan 1, (Accepted/In press) In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Time and flow stress dependences of internal stress during stress relaxation

Kusuda, Y., Murasawa, K., Suzuki, Y., Suzuki, S., Takamura, M., Hakoyama, T., Ikeda, Y., Otake, Y. & Hama, T., 2018 Jan 1, In : Procedia Manufacturing. 15, p. 1746-1753 8 p.

Research output: Contribution to journalConference article

Open Access
2017

Simple energy dissipation model of riveted lap joint in aircraft structure

Tachi, T., Machida, S., Okada, T. & Suzuki, S., 2017 Jan 1, In : Transactions of the Japan Society for Aeronautical and Space Sciences. 60, 6, p. 341-346 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2016

Crack formation and propagation mechanism in the punching process of high tensile strength steel sheet

Okano, T., Sakumoto, K., Yamazaki, K., Toyoda, S. & Suzuki, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 643-651 9 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Design of next generation Ni-base single crystal superalloys containing Ir: Towards 1150 °c temperature capability

Yokokawa, T., Harada, H., Mori, Y., Kawagishi, K., Koizumi, Y., Kobayashi, T., Yuyama, M. & Suzuki, S., 2016, SUPERALLOYS 2016 - Proceedings of the 13th International Symposium on Superalloys. Minerals, Metals and Materials Society, Vol. 2016-January. p. 123-130 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Effect of cementite on ductile fracture in high tensile strength steel sheets

Maeda, M., Shimamura, J. & Suzuki, S., 2016, Materials Science and Technology Conference and Exhibition 2016, MS and T 2016. Association for Iron and Steel Technology, AISTECH, Vol. 1. p. 573-577 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of sulfur on creep strength of Ni-base single-crystal superalloy, TMS-1700

Joh, Y., Utada, S., Osawa, M., Kobayashi, T., Yokokawa, T., Kawagishi, K., Suzuki, S. & Harada, H., 2016, In : Materials Transactions. 57, 8, p. 1305-1308 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

High temperature properties of a single crystal superalloy PWA1484 directly recycled after turbine blade use

Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2016, SUPERALLOYS 2016 - Proceedings of the 13th International Symposium on Superalloys. Minerals, Metals and Materials Society, Vol. 2016-January. p. 591-599 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Improvement of ductility with maintaining strength of drawn high carbon steel wire

Gondo, S., Suzuki, S., Asakawa, M., Takemoto, K., Tashima, K. & Kajino, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 32-38 7 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Phase stability of nickel-base single crystal superalloys containing iridium substituting for ruthenium

Mori, Y., Yokokawa, T., Kobayashi, T., Harada, H. & Suzuki, S., 2016, In : Materials Transactions. 57, 10, p. 1845-1848 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Texture evaluation in ductile fracture process by neutron diffraction measurement

Sunaga, H., Takamura, M., Ikeda, Y., Otake, Y., Hama, T., Kumagai, M., Suzuki, H. & Suzuki, S., 2016 Sep 1, In : Journal of Physics: Conference Series. 734, 3, 032027.

Research output: Contribution to journalArticle

1 Citation (Scopus)

The influence of strain rate and strain on the behavior of stress relaxation in 980 MPa-grade dual phase steel sheets

Murasawa, K., Komine, H., Otake, Y., Sunaga, H., Takamura, M., Ikeda, Y. & Suzuki, S., 2016, Metal Forming 2016. Trans Tech Publications Ltd, Vol. 716. p. 948-953 6 p. (Key Engineering Materials; vol. 716).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)