A large current and high speed laser diode driver using switch position modification

Yun Yang, Jia Guo, Yasuaki Inoue, Hong Yu

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)

    Abstract

    This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of "Switch Position Modification (SPM)", two types of LDD circuit architectures, including "Combination Switch Mode (CSM)" and "Source Follower Mode (SFM)", have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced "Switch Position Modification" idea and the proposed "Combination Switch Mode" architecture assure the high performance LDD circuit realization and signal output.

    Original languageEnglish
    Title of host publication2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings
    Pages2319-2323
    Number of pages5
    Volume4
    DOIs
    Publication statusPublished - 2006
    Event2006 International Conference on Communications, Circuits and Systems, ICCCAS - Guilin
    Duration: 2006 Jun 252006 Jun 28

    Other

    Other2006 International Conference on Communications, Circuits and Systems, ICCCAS
    CityGuilin
    Period06/6/2506/6/28

    Fingerprint

    Semiconductor lasers
    Switches
    Networks (circuits)
    Transistors
    Specifications

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    Cite this

    Yang, Y., Guo, J., Inoue, Y., & Yu, H. (2006). A large current and high speed laser diode driver using switch position modification. In 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings (Vol. 4, pp. 2319-2323). [4064388] https://doi.org/10.1109/ICCCAS.2006.285141

    A large current and high speed laser diode driver using switch position modification. / Yang, Yun; Guo, Jia; Inoue, Yasuaki; Yu, Hong.

    2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings. Vol. 4 2006. p. 2319-2323 4064388.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Yang, Y, Guo, J, Inoue, Y & Yu, H 2006, A large current and high speed laser diode driver using switch position modification. in 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings. vol. 4, 4064388, pp. 2319-2323, 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Guilin, 06/6/25. https://doi.org/10.1109/ICCCAS.2006.285141
    Yang Y, Guo J, Inoue Y, Yu H. A large current and high speed laser diode driver using switch position modification. In 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings. Vol. 4. 2006. p. 2319-2323. 4064388 https://doi.org/10.1109/ICCCAS.2006.285141
    Yang, Yun ; Guo, Jia ; Inoue, Yasuaki ; Yu, Hong. / A large current and high speed laser diode driver using switch position modification. 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings. Vol. 4 2006. pp. 2319-2323
    @inproceedings{f37235d97f11439daefb3a7048b50512,
    title = "A large current and high speed laser diode driver using switch position modification",
    abstract = "This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of {"}Switch Position Modification (SPM){"}, two types of LDD circuit architectures, including {"}Combination Switch Mode (CSM){"} and {"}Source Follower Mode (SFM){"}, have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced {"}Switch Position Modification{"} idea and the proposed {"}Combination Switch Mode{"} architecture assure the high performance LDD circuit realization and signal output.",
    author = "Yun Yang and Jia Guo and Yasuaki Inoue and Hong Yu",
    year = "2006",
    doi = "10.1109/ICCCAS.2006.285141",
    language = "English",
    isbn = "0780395840",
    volume = "4",
    pages = "2319--2323",
    booktitle = "2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings",

    }

    TY - GEN

    T1 - A large current and high speed laser diode driver using switch position modification

    AU - Yang, Yun

    AU - Guo, Jia

    AU - Inoue, Yasuaki

    AU - Yu, Hong

    PY - 2006

    Y1 - 2006

    N2 - This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of "Switch Position Modification (SPM)", two types of LDD circuit architectures, including "Combination Switch Mode (CSM)" and "Source Follower Mode (SFM)", have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced "Switch Position Modification" idea and the proposed "Combination Switch Mode" architecture assure the high performance LDD circuit realization and signal output.

    AB - This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of "Switch Position Modification (SPM)", two types of LDD circuit architectures, including "Combination Switch Mode (CSM)" and "Source Follower Mode (SFM)", have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced "Switch Position Modification" idea and the proposed "Combination Switch Mode" architecture assure the high performance LDD circuit realization and signal output.

    UR - http://www.scopus.com/inward/record.url?scp=39749135355&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=39749135355&partnerID=8YFLogxK

    U2 - 10.1109/ICCCAS.2006.285141

    DO - 10.1109/ICCCAS.2006.285141

    M3 - Conference contribution

    SN - 0780395840

    SN - 9780780395848

    VL - 4

    SP - 2319

    EP - 2323

    BT - 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings

    ER -