A Method to Design the Controller of the Voltage Phase Angle Type Torque Feed-back Control System for PMSM

Tofu Kashimura, Masaki Morikawa, Jongwon Heo, Keiichiro Kondo

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Abstract

    A method to design the torque feed-back controller of the voltage phase angle type is proposed in this paper. In the previous research, a method to design the torque feed-back controller is proposed, and accurate torque control performance in high speed range has been confirmed in experiment. On the other hand, the effect of approximation in the designing process of the controller has not been verified. In designing controller, two kinds of approximations were carried out. One is an effect of linearization. The other is an effect of feed-forward controller. A new gain design method is proposed using the bode diagram. And the design method is verified by the experimental system with 1-kWIPMSM.

    Original languageEnglish
    Title of host publicationSPEEDAM 2018 - Proceedings
    Subtitle of host publicationInternational Symposium on Power Electronics, Electrical Drives, Automation and Motion
    PublisherInstitute of Electrical and Electronics Engineers Inc.
    Pages956-962
    Number of pages7
    ISBN (Print)9781538649411
    DOIs
    Publication statusPublished - 2018 Aug 23
    Event2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2018 - Amalfi, Italy
    Duration: 2018 Jun 202018 Jun 22

    Other

    Other2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2018
    CountryItaly
    CityAmalfi
    Period18/6/2018/6/22

      Fingerprint

    Keywords

    • Field weakening control
    • IPMSM
    • Torque feedback control

    ASJC Scopus subject areas

    • Energy Engineering and Power Technology
    • Electrical and Electronic Engineering
    • Mechanical Engineering
    • Control and Optimization

    Cite this

    Kashimura, T., Morikawa, M., Heo, J., & Kondo, K. (2018). A Method to Design the Controller of the Voltage Phase Angle Type Torque Feed-back Control System for PMSM. In SPEEDAM 2018 - Proceedings: International Symposium on Power Electronics, Electrical Drives, Automation and Motion (pp. 956-962). [8445419] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SPEEDAM.2018.8445419