A novel low-loss splice for photonic bandgap fiber gas sensor

Xuefeng Li, Joanna Pawłat, Jinxing Liang, Toshitsugu Ueda

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)


    This paper presents a novel low-loss splice between the Photonic bandgap fiber (PBGF) and conventional step index fiber, for making PBGFs more functional. The solidcore fiber is butt-coupled to a PBGF using a mechanical splice surrounded by the block. The gap between the butt-coupled fibers is the most important parameter for keeping good output coupling efficiency and allowing for gas diffusion. For achieving the small gap, a focused ion beam (FIB) milling technique was developed for getting clean fiber surface. The achieved gap is adjustable from 0 to 400ìm. And a typical value at the gap of 20μm was 1.6 dB.

    Original languageEnglish
    Title of host publicationProceedings of IEEE Sensors
    Number of pages4
    Publication statusPublished - 2008
    Event2008 IEEE Sensors, SENSORS 2008 - Lecce
    Duration: 2008 Oct 262009 Oct 29


    Other2008 IEEE Sensors, SENSORS 2008

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    Fingerprint Dive into the research topics of 'A novel low-loss splice for photonic bandgap fiber gas sensor'. Together they form a unique fingerprint.

  • Cite this

    Li, X., Pawłat, J., Liang, J., & Ueda, T. (2008). A novel low-loss splice for photonic bandgap fiber gas sensor. In Proceedings of IEEE Sensors (pp. 1289-1292). [4716680] https://doi.org/10.1109/ICSENS.2008.4716680