A Sound Monitoring System for Fault Detection of Machine and Machining States

Shozo Takata, J. H. Ahn, M. Miki, Y. Miyao, T. Sata

Research output: Contribution to journalArticle

32 Citations (Scopus)

Abstract

This paper describes a sound monitoring system using a speech recognition technique. The system provides the untended manufacturing system with the function of overall monitoring capability. It identifies various operational sounds emitted by the machine, and check if they are proper ones which are expected from the control information prior to the operation. We adopted the speaker-dependent isolated word recognition technique based on the short time spectrum analysis for sound recognition. The experimental system was developed using the speech recognition board equipped with the special LSI. The recognition tests of the operational sound of a vertical machining center showed the ability of the system to identify the sorts of operations including the cutting and non-cutting operations. It can also discriminate the cutting sound with a broken tool from the normal cutting sound. The ability to distinguish the variations of cutting parameters was also studied. The system distinguished the variation of cutting speed and depth of cut fairly well. The monitoring experiments were carried out for a series of machining operations of a test part. The results demonstrated the effectiveness of the system as an overall monitoring method.

Original languageEnglish
Pages (from-to)289-292
Number of pages4
JournalCIRP Annals - Manufacturing Technology
Volume35
Issue number1
DOIs
Publication statusPublished - 1986
Externally publishedYes

Fingerprint

Fault detection
Machining
Acoustic waves
Monitoring
Speech recognition
Machining centers
Spectrum analysis
Experiments

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

A Sound Monitoring System for Fault Detection of Machine and Machining States. / Takata, Shozo; Ahn, J. H.; Miki, M.; Miyao, Y.; Sata, T.

In: CIRP Annals - Manufacturing Technology, Vol. 35, No. 1, 1986, p. 289-292.

Research output: Contribution to journalArticle

Takata, Shozo ; Ahn, J. H. ; Miki, M. ; Miyao, Y. ; Sata, T. / A Sound Monitoring System for Fault Detection of Machine and Machining States. In: CIRP Annals - Manufacturing Technology. 1986 ; Vol. 35, No. 1. pp. 289-292.
@article{8282aa9051a14c3f84638cb4bb4b311c,
title = "A Sound Monitoring System for Fault Detection of Machine and Machining States",
abstract = "This paper describes a sound monitoring system using a speech recognition technique. The system provides the untended manufacturing system with the function of overall monitoring capability. It identifies various operational sounds emitted by the machine, and check if they are proper ones which are expected from the control information prior to the operation. We adopted the speaker-dependent isolated word recognition technique based on the short time spectrum analysis for sound recognition. The experimental system was developed using the speech recognition board equipped with the special LSI. The recognition tests of the operational sound of a vertical machining center showed the ability of the system to identify the sorts of operations including the cutting and non-cutting operations. It can also discriminate the cutting sound with a broken tool from the normal cutting sound. The ability to distinguish the variations of cutting parameters was also studied. The system distinguished the variation of cutting speed and depth of cut fairly well. The monitoring experiments were carried out for a series of machining operations of a test part. The results demonstrated the effectiveness of the system as an overall monitoring method.",
author = "Shozo Takata and Ahn, {J. H.} and M. Miki and Y. Miyao and T. Sata",
year = "1986",
doi = "10.1016/S0007-8506(07)61890-3",
language = "English",
volume = "35",
pages = "289--292",
journal = "CIRP Annals - Manufacturing Technology",
issn = "0007-8506",
publisher = "Elsevier USA",
number = "1",

}

TY - JOUR

T1 - A Sound Monitoring System for Fault Detection of Machine and Machining States

AU - Takata, Shozo

AU - Ahn, J. H.

AU - Miki, M.

AU - Miyao, Y.

AU - Sata, T.

PY - 1986

Y1 - 1986

N2 - This paper describes a sound monitoring system using a speech recognition technique. The system provides the untended manufacturing system with the function of overall monitoring capability. It identifies various operational sounds emitted by the machine, and check if they are proper ones which are expected from the control information prior to the operation. We adopted the speaker-dependent isolated word recognition technique based on the short time spectrum analysis for sound recognition. The experimental system was developed using the speech recognition board equipped with the special LSI. The recognition tests of the operational sound of a vertical machining center showed the ability of the system to identify the sorts of operations including the cutting and non-cutting operations. It can also discriminate the cutting sound with a broken tool from the normal cutting sound. The ability to distinguish the variations of cutting parameters was also studied. The system distinguished the variation of cutting speed and depth of cut fairly well. The monitoring experiments were carried out for a series of machining operations of a test part. The results demonstrated the effectiveness of the system as an overall monitoring method.

AB - This paper describes a sound monitoring system using a speech recognition technique. The system provides the untended manufacturing system with the function of overall monitoring capability. It identifies various operational sounds emitted by the machine, and check if they are proper ones which are expected from the control information prior to the operation. We adopted the speaker-dependent isolated word recognition technique based on the short time spectrum analysis for sound recognition. The experimental system was developed using the speech recognition board equipped with the special LSI. The recognition tests of the operational sound of a vertical machining center showed the ability of the system to identify the sorts of operations including the cutting and non-cutting operations. It can also discriminate the cutting sound with a broken tool from the normal cutting sound. The ability to distinguish the variations of cutting parameters was also studied. The system distinguished the variation of cutting speed and depth of cut fairly well. The monitoring experiments were carried out for a series of machining operations of a test part. The results demonstrated the effectiveness of the system as an overall monitoring method.

UR - http://www.scopus.com/inward/record.url?scp=0022866528&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022866528&partnerID=8YFLogxK

U2 - 10.1016/S0007-8506(07)61890-3

DO - 10.1016/S0007-8506(07)61890-3

M3 - Article

VL - 35

SP - 289

EP - 292

JO - CIRP Annals - Manufacturing Technology

JF - CIRP Annals - Manufacturing Technology

SN - 0007-8506

IS - 1

ER -