### Abstract

The objective of the research is to establish mathematical models representing the kinematic motion deviations of the machine tools on the basis of the geometric tolerances of the components, and to apply the models to theoretical analysis of the kinematic motion deviations of the machine tools. Mathematical models are proposed to represent the kinematic motion deviations of the linear tables of the machine tools. The proposed models give the relationships between the geometric tolerances of the guide-ways of the components and the kinematic motion deviations of the linear tables. The models of the linear tables are combined to represent the whole machine tools to represent the positional deviations of the tools against the workpieces. The developed models are applied to the analysis of the kinematic motion deviations of the machine tools, aiming at clarifying the effects of the geometric deviations of the components on the kinematic motion deviations between the tools and the workpieces.

Original language | English |
---|---|

Pages (from-to) | 198-205 |

Number of pages | 8 |

Journal | Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C |

Volume | 74 |

Issue number | 1 |

Publication status | Published - 2008 Jan 1 |

Externally published | Yes |

### Fingerprint

### Keywords

- Geometric deviations
- Geometric tolerance
- Machine tools
- Motion deviations
- Statistical analysis

### ASJC Scopus subject areas

- Mechanical Engineering

### Cite this

*Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C*,

*74*(1), 198-205.

**A study on modeling and analysis of kinematic motion deviations of machine tools (2nd report, modeling and analysis of linear tables and mechine tools).** / Satonaka, Naoki; Sugimura, Nobuhiro; Tanimizu, Yoshitaka; Iwamura, Koji.

Research output: Contribution to journal › Article

*Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C*, vol. 74, no. 1, pp. 198-205.

}

TY - JOUR

T1 - A study on modeling and analysis of kinematic motion deviations of machine tools (2nd report, modeling and analysis of linear tables and mechine tools)

AU - Satonaka, Naoki

AU - Sugimura, Nobuhiro

AU - Tanimizu, Yoshitaka

AU - Iwamura, Koji

PY - 2008/1/1

Y1 - 2008/1/1

N2 - The objective of the research is to establish mathematical models representing the kinematic motion deviations of the machine tools on the basis of the geometric tolerances of the components, and to apply the models to theoretical analysis of the kinematic motion deviations of the machine tools. Mathematical models are proposed to represent the kinematic motion deviations of the linear tables of the machine tools. The proposed models give the relationships between the geometric tolerances of the guide-ways of the components and the kinematic motion deviations of the linear tables. The models of the linear tables are combined to represent the whole machine tools to represent the positional deviations of the tools against the workpieces. The developed models are applied to the analysis of the kinematic motion deviations of the machine tools, aiming at clarifying the effects of the geometric deviations of the components on the kinematic motion deviations between the tools and the workpieces.

AB - The objective of the research is to establish mathematical models representing the kinematic motion deviations of the machine tools on the basis of the geometric tolerances of the components, and to apply the models to theoretical analysis of the kinematic motion deviations of the machine tools. Mathematical models are proposed to represent the kinematic motion deviations of the linear tables of the machine tools. The proposed models give the relationships between the geometric tolerances of the guide-ways of the components and the kinematic motion deviations of the linear tables. The models of the linear tables are combined to represent the whole machine tools to represent the positional deviations of the tools against the workpieces. The developed models are applied to the analysis of the kinematic motion deviations of the machine tools, aiming at clarifying the effects of the geometric deviations of the components on the kinematic motion deviations between the tools and the workpieces.

KW - Geometric deviations

KW - Geometric tolerance

KW - Machine tools

KW - Motion deviations

KW - Statistical analysis

UR - http://www.scopus.com/inward/record.url?scp=42149104387&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=42149104387&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:42149104387

VL - 74

SP - 198

EP - 205

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

SN - 0387-5024

IS - 1

ER -