A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)

Naoki Satonaka; Nobuhiro Sugimura; Yoshitaka Tanimizu; Koji Iwamura

doi:10.1299/kikaic.71.2622

A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)

Naoki Satonaka, Nobuhiro Sugimura, Yoshitaka Tanimizu, Koji Iwamura

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Abstract

The objective of the present research is to develop a systematic method for planning and analysis of kinematic motion deviations of machine tools based on geometric tolerances of three-dimensional components. This paper deals with the modeling and analysis of the geometric deviations of the toleranced components. The tolerance zones of the geometric features of the components are investigated and classified based on the definitions of the geometric tolerances. The parameters are defined to describe the deviations of the geometric features within the tolerance zones. An analytical method is proposed to estimate the statistic deviations of the positions and the orientations of the geometric features, based on the deviation parameters and the relationships between the datum features and the toleranced features.

Original language	English
Pages (from-to)	2622-2628
Number of pages	7
Journal	Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume	71
Issue number	8
DOIs	https://doi.org/10.1299/kikaic.71.2622
Publication status	Published - 2005 Aug
Externally published	Yes

Keywords

Geometric Deviations
Geometric Tolerance
Machine Tools
Motion Deviations
Statistical Analysis

ASJC Scopus subject areas

Mechanics of Materials
Mechanical Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1299/kikaic.71.2622

Cite this

Satonaka, N., Sugimura, N., Tanimizu, Y., & Iwamura, K. (2005). A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units). Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 71(8), 2622-2628. https://doi.org/10.1299/kikaic.71.2622

A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units). / Satonaka, Naoki; Sugimura, Nobuhiro; Tanimizu, Yoshitaka et al.

In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Vol. 71, No. 8, 08.2005, p. 2622-2628.

Research output: Contribution to journal › Article › peer-review

Satonaka, N, Sugimura, N, Tanimizu, Y & Iwamura, K 2005, 'A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)', Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, vol. 71, no. 8, pp. 2622-2628. https://doi.org/10.1299/kikaic.71.2622

Satonaka, Naoki ; Sugimura, Nobuhiro ; Tanimizu, Yoshitaka et al. / A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units). In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 2005 ; Vol. 71, No. 8. pp. 2622-2628.

@article{5f7a09d941f34af28041a89e17180fff,

title = "A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)",

abstract = "The objective of the present research is to develop a systematic method for planning and analysis of kinematic motion deviations of machine tools based on geometric tolerances of three-dimensional components. This paper deals with the modeling and analysis of the geometric deviations of the toleranced components. The tolerance zones of the geometric features of the components are investigated and classified based on the definitions of the geometric tolerances. The parameters are defined to describe the deviations of the geometric features within the tolerance zones. An analytical method is proposed to estimate the statistic deviations of the positions and the orientations of the geometric features, based on the deviation parameters and the relationships between the datum features and the toleranced features.",

keywords = "Geometric Deviations, Geometric Tolerance, Machine Tools, Motion Deviations, Statistical Analysis",

author = "Naoki Satonaka and Nobuhiro Sugimura and Yoshitaka Tanimizu and Koji Iwamura",

year = "2005",

month = aug,

doi = "10.1299/kikaic.71.2622",

language = "English",

volume = "71",

pages = "2622--2628",

journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",

issn = "0387-5024",

publisher = "Japan Society of Mechanical Engineers",

number = "8",

}

TY - JOUR

T1 - A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)

AU - Satonaka, Naoki

AU - Sugimura, Nobuhiro

AU - Tanimizu, Yoshitaka

AU - Iwamura, Koji

PY - 2005/8

Y1 - 2005/8

N2 - The objective of the present research is to develop a systematic method for planning and analysis of kinematic motion deviations of machine tools based on geometric tolerances of three-dimensional components. This paper deals with the modeling and analysis of the geometric deviations of the toleranced components. The tolerance zones of the geometric features of the components are investigated and classified based on the definitions of the geometric tolerances. The parameters are defined to describe the deviations of the geometric features within the tolerance zones. An analytical method is proposed to estimate the statistic deviations of the positions and the orientations of the geometric features, based on the deviation parameters and the relationships between the datum features and the toleranced features.

AB - The objective of the present research is to develop a systematic method for planning and analysis of kinematic motion deviations of machine tools based on geometric tolerances of three-dimensional components. This paper deals with the modeling and analysis of the geometric deviations of the toleranced components. The tolerance zones of the geometric features of the components are investigated and classified based on the definitions of the geometric tolerances. The parameters are defined to describe the deviations of the geometric features within the tolerance zones. An analytical method is proposed to estimate the statistic deviations of the positions and the orientations of the geometric features, based on the deviation parameters and the relationships between the datum features and the toleranced features.

KW - Geometric Deviations

KW - Geometric Tolerance

KW - Machine Tools

KW - Motion Deviations

KW - Statistical Analysis

UR - http://www.scopus.com/inward/record.url?scp=27744597510&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27744597510&partnerID=8YFLogxK

U2 - 10.1299/kikaic.71.2622

DO - 10.1299/kikaic.71.2622

M3 - Article

AN - SCOPUS:27744597510

VL - 71

SP - 2622

EP - 2628

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

SN - 0387-5024

IS - 8

ER -

A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this