A study on torelance design of five-axis machining centers

Ryo Takematsu, Naoki Satonaka, Nobuhiro Sugimura, Koji Iwamura, Nguyen Quang Thinh, Yoshitaka Tanimizu

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The objective of the research is to establish a systematic design method applicable to analysis and design of kinematic motion deviations of five-axis machining centers based on the tolerances of the guide-ways. A systematic procedure is proposed to determine the tolerance values of the guide-ways theoretically under the constraints on the kinematic motion deviations of five-axis machining centers, by applying ISO Tolerance definitions. The proposed method provides us with theoretical way to design the geometric tolerances of the guide-ways connecting the components of five-axis machining centers, based on allowance of the kinematic motion deviation of the tools against the workpieces.

Original languageEnglish
Title of host publicationInternational Symposium on Flexible Automation, ISFA 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages348-351
Number of pages4
ISBN (Electronic)9781509034673
DOIs
Publication statusPublished - 2016 Dec 16
Externally publishedYes
EventInternational Symposium on Flexible Automation, ISFA 2016 - Cleveland, United States
Duration: 2016 Aug 12016 Aug 3

Other

OtherInternational Symposium on Flexible Automation, ISFA 2016
CountryUnited States
CityCleveland
Period16/8/116/8/3

    Fingerprint

ASJC Scopus subject areas

  • Artificial Intelligence
  • Control and Systems Engineering

Cite this

Takematsu, R., Satonaka, N., Sugimura, N., Iwamura, K., Thinh, N. Q., & Tanimizu, Y. (2016). A study on torelance design of five-axis machining centers. In International Symposium on Flexible Automation, ISFA 2016 (pp. 348-351). [7790186] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISFA.2016.7790186