A twin-roll caster to cast clad strip

Research output: Contribution to journalArticle

45 Citations (Scopus)

Abstract

A single-roll caster and two kinds of twin-roll casters to cast clad strips were designed and assembled. One of twin-roll casters was suitable for clad strip casting. This twin-roll caster can cast clad strips of aluminum alloys at the speed of 20m/min. The thickness of the clad strip is about 2.0mm. The clad strip has a clear interface between the two strips. The clad strip is connected strongly at the interface. Therefore, the clad strip does not peel off at the interface after bending until broken. The clad ratio of the thickness between the overlay strip and the base strip is 2:1-1:10. An alloy with a melting point lower than that of the base strip is suitable for the overlay strip. The roll speed, cooling distance of the base strip, and the temperatures of the melt for the overlay strip are important factors in producing sound clad strips.

Original languageEnglish
Pages (from-to)366-371
Number of pages6
JournalJournal of Materials Processing Technology
Volume138
Issue number1-3
DOIs
Publication statusPublished - 2003 Jul 20
Externally publishedYes

Fingerprint

Melting point
Aluminum alloys
Casting
Acoustic waves
Cooling
Temperature

Keywords

  • Melt drag twin-roll caster
  • Roll casting
  • Strip casting
  • Thin strip
  • Twin-roll caster

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

A twin-roll caster to cast clad strip. / Haga, T.; Suzuki, Shinsuke.

In: Journal of Materials Processing Technology, Vol. 138, No. 1-3, 20.07.2003, p. 366-371.

Research output: Contribution to journalArticle

@article{95c27b0dacf4407bbc658834420f478d,
title = "A twin-roll caster to cast clad strip",
abstract = "A single-roll caster and two kinds of twin-roll casters to cast clad strips were designed and assembled. One of twin-roll casters was suitable for clad strip casting. This twin-roll caster can cast clad strips of aluminum alloys at the speed of 20m/min. The thickness of the clad strip is about 2.0mm. The clad strip has a clear interface between the two strips. The clad strip is connected strongly at the interface. Therefore, the clad strip does not peel off at the interface after bending until broken. The clad ratio of the thickness between the overlay strip and the base strip is 2:1-1:10. An alloy with a melting point lower than that of the base strip is suitable for the overlay strip. The roll speed, cooling distance of the base strip, and the temperatures of the melt for the overlay strip are important factors in producing sound clad strips.",
keywords = "Melt drag twin-roll caster, Roll casting, Strip casting, Thin strip, Twin-roll caster",
author = "T. Haga and Shinsuke Suzuki",
year = "2003",
month = "7",
day = "20",
doi = "10.1016/S0924-0136(03)00100-6",
language = "English",
volume = "138",
pages = "366--371",
journal = "Journal of Materials Processing Technology",
issn = "0924-0136",
publisher = "Elsevier BV",
number = "1-3",

}

TY - JOUR

T1 - A twin-roll caster to cast clad strip

AU - Haga, T.

AU - Suzuki, Shinsuke

PY - 2003/7/20

Y1 - 2003/7/20

N2 - A single-roll caster and two kinds of twin-roll casters to cast clad strips were designed and assembled. One of twin-roll casters was suitable for clad strip casting. This twin-roll caster can cast clad strips of aluminum alloys at the speed of 20m/min. The thickness of the clad strip is about 2.0mm. The clad strip has a clear interface between the two strips. The clad strip is connected strongly at the interface. Therefore, the clad strip does not peel off at the interface after bending until broken. The clad ratio of the thickness between the overlay strip and the base strip is 2:1-1:10. An alloy with a melting point lower than that of the base strip is suitable for the overlay strip. The roll speed, cooling distance of the base strip, and the temperatures of the melt for the overlay strip are important factors in producing sound clad strips.

AB - A single-roll caster and two kinds of twin-roll casters to cast clad strips were designed and assembled. One of twin-roll casters was suitable for clad strip casting. This twin-roll caster can cast clad strips of aluminum alloys at the speed of 20m/min. The thickness of the clad strip is about 2.0mm. The clad strip has a clear interface between the two strips. The clad strip is connected strongly at the interface. Therefore, the clad strip does not peel off at the interface after bending until broken. The clad ratio of the thickness between the overlay strip and the base strip is 2:1-1:10. An alloy with a melting point lower than that of the base strip is suitable for the overlay strip. The roll speed, cooling distance of the base strip, and the temperatures of the melt for the overlay strip are important factors in producing sound clad strips.

KW - Melt drag twin-roll caster

KW - Roll casting

KW - Strip casting

KW - Thin strip

KW - Twin-roll caster

UR - http://www.scopus.com/inward/record.url?scp=0038819052&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0038819052&partnerID=8YFLogxK

U2 - 10.1016/S0924-0136(03)00100-6

DO - 10.1016/S0924-0136(03)00100-6

M3 - Article

VL - 138

SP - 366

EP - 371

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

SN - 0924-0136

IS - 1-3

ER -