A two-phase full-wave superconducting rectifier

T. Ariga, A. Ishiyama

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

A two-phase full-wave superconducting rectifier has been developed as a small cryogenic power supply of superconducting magnets for magnetically levitation trains. Those magnets will be operated in the persistent current mode. However, small ohmic loss caused at resistive joints and ac loss induced by the vibration of the train cannot be avoided. Therefore. the low-power cryogenic power supply will be required to compensate for the reduction in magnet current. The presented superconducting rectifier consists of two identical full-wave rectifiers connected in series. Main components of each rectifier are a troidal shape superconducting setup transformer and two thermally controlled switches. The test results using a 47.5 mH load magnet at 0.2 Hz and 0.5 Hz operations are described. To estimate the characteristics of the superconducting rectifier, we have developed a simulation code. From the experiments and the simulations, the transfer efficiency is examined. Furthermore, the optimal design of thermally controlled switches based on the finite element analysis is also discussed.

Original languageEnglish
Pages (from-to)1815-1818
Number of pages4
JournalIEEE Transactions on Magnetics
Volume25
Issue number2
DOIs
Publication statusPublished - 1989 Mar

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'A two-phase full-wave superconducting rectifier'. Together they form a unique fingerprint.

Cite this