Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature

Yoshihiro Mizutani, Yoshiki Morino, Takahashi Hiromu

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Four channels Acoustic Emission (AE) monitoring was conducted for both the ambient and cryogenic tests of unlined filament-wound (FW) CFRP tank. We first evaluated soundness of the tank by using traditional AE parameter analysis. Kaiser effect was obtained at an ambient test. Felicity ratio calculated from AE-onset stress and the maximum previous stress indicated that the pressure was close to a critical pressure to cause damage. Sudden energy increases points which probably indicate large damage occurrence were also observed several times at the ambient test. Several leak points were found in repaired area by snoop test conducted after the ambient test. After the ambient test, we conducted cryogenic test. In the fill-process, boiling and droplet-impacting of LN 2 made difficult to monitor fracture induced AE signals. In the pressurization process, serious leakage from the repaired area occurred at 2.0MPa. High energy AE signals were observed three times before pressure reached 2.0MPa. Several new leak points were found in the repaired area and doom parts. Only one leak point was found near the monitoring area on a wrinkle. Waveform based detailed source location near the leak point was conducted after the test. Source locations of 7 AE events are obtained from the area where leakage was found.

Original languageEnglish
Title of host publicationCollection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
Pages4884-4893
Number of pages10
Volume7
Publication statusPublished - 2003
Externally publishedYes
Event44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - Norfolk, VA, United States
Duration: 2003 Apr 72003 Apr 10

Other

Other44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
CountryUnited States
CityNorfolk, VA
Period03/4/703/4/10

Fingerprint

Carbon fiber reinforced plastics
Acoustic emissions
Cryogenics
Monitoring
Temperature
Pressurization
Boiling liquids

ASJC Scopus subject areas

  • Architecture

Cite this

Mizutani, Y., Morino, Y., & Hiromu, T. (2003). Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature. In Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (Vol. 7, pp. 4884-4893)

Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature. / Mizutani, Yoshihiro; Morino, Yoshiki; Hiromu, Takahashi.

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 7 2003. p. 4884-4893.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mizutani, Y, Morino, Y & Hiromu, T 2003, Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature. in Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. vol. 7, pp. 4884-4893, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, United States, 03/4/7.
Mizutani Y, Morino Y, Hiromu T. Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature. In Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 7. 2003. p. 4884-4893
Mizutani, Yoshihiro ; Morino, Yoshiki ; Hiromu, Takahashi. / Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 7 2003. pp. 4884-4893
@inproceedings{d635d11dd5c546099eb9e3673cf7ee27,
title = "Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature",
abstract = "Four channels Acoustic Emission (AE) monitoring was conducted for both the ambient and cryogenic tests of unlined filament-wound (FW) CFRP tank. We first evaluated soundness of the tank by using traditional AE parameter analysis. Kaiser effect was obtained at an ambient test. Felicity ratio calculated from AE-onset stress and the maximum previous stress indicated that the pressure was close to a critical pressure to cause damage. Sudden energy increases points which probably indicate large damage occurrence were also observed several times at the ambient test. Several leak points were found in repaired area by snoop test conducted after the ambient test. After the ambient test, we conducted cryogenic test. In the fill-process, boiling and droplet-impacting of LN 2 made difficult to monitor fracture induced AE signals. In the pressurization process, serious leakage from the repaired area occurred at 2.0MPa. High energy AE signals were observed three times before pressure reached 2.0MPa. Several new leak points were found in the repaired area and doom parts. Only one leak point was found near the monitoring area on a wrinkle. Waveform based detailed source location near the leak point was conducted after the test. Source locations of 7 AE events are obtained from the area where leakage was found.",
author = "Yoshihiro Mizutani and Yoshiki Morino and Takahashi Hiromu",
year = "2003",
language = "English",
volume = "7",
pages = "4884--4893",
booktitle = "Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference",

}

TY - GEN

T1 - Acoustic emission monitoring of CFRP tank at ambient and cryogenic temperature

AU - Mizutani, Yoshihiro

AU - Morino, Yoshiki

AU - Hiromu, Takahashi

PY - 2003

Y1 - 2003

N2 - Four channels Acoustic Emission (AE) monitoring was conducted for both the ambient and cryogenic tests of unlined filament-wound (FW) CFRP tank. We first evaluated soundness of the tank by using traditional AE parameter analysis. Kaiser effect was obtained at an ambient test. Felicity ratio calculated from AE-onset stress and the maximum previous stress indicated that the pressure was close to a critical pressure to cause damage. Sudden energy increases points which probably indicate large damage occurrence were also observed several times at the ambient test. Several leak points were found in repaired area by snoop test conducted after the ambient test. After the ambient test, we conducted cryogenic test. In the fill-process, boiling and droplet-impacting of LN 2 made difficult to monitor fracture induced AE signals. In the pressurization process, serious leakage from the repaired area occurred at 2.0MPa. High energy AE signals were observed three times before pressure reached 2.0MPa. Several new leak points were found in the repaired area and doom parts. Only one leak point was found near the monitoring area on a wrinkle. Waveform based detailed source location near the leak point was conducted after the test. Source locations of 7 AE events are obtained from the area where leakage was found.

AB - Four channels Acoustic Emission (AE) monitoring was conducted for both the ambient and cryogenic tests of unlined filament-wound (FW) CFRP tank. We first evaluated soundness of the tank by using traditional AE parameter analysis. Kaiser effect was obtained at an ambient test. Felicity ratio calculated from AE-onset stress and the maximum previous stress indicated that the pressure was close to a critical pressure to cause damage. Sudden energy increases points which probably indicate large damage occurrence were also observed several times at the ambient test. Several leak points were found in repaired area by snoop test conducted after the ambient test. After the ambient test, we conducted cryogenic test. In the fill-process, boiling and droplet-impacting of LN 2 made difficult to monitor fracture induced AE signals. In the pressurization process, serious leakage from the repaired area occurred at 2.0MPa. High energy AE signals were observed three times before pressure reached 2.0MPa. Several new leak points were found in the repaired area and doom parts. Only one leak point was found near the monitoring area on a wrinkle. Waveform based detailed source location near the leak point was conducted after the test. Source locations of 7 AE events are obtained from the area where leakage was found.

UR - http://www.scopus.com/inward/record.url?scp=0042466646&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0042466646&partnerID=8YFLogxK

M3 - Conference contribution

VL - 7

SP - 4884

EP - 4893

BT - Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

ER -