An approach to fault point identification using neocognitron and BP neural network

Diwei Zhou, Keichiro Yasuda, Ryuichi Yokoyama

    Research output: Contribution to journalArticle

    Abstract

    This paper presents a new approach to identity a fault point in a power system on real time. Based on the topology theory, the characteristics of a fault in the power system are treated as a pattern of the fault. Therefore, the calculation complexity of traditional approaches can be avoided. The aim of the proposed method is to identify fault points through directly analyzing the type of fault. Since each type of fault has each characteristic pattern of power flow, fault points can be identified by abstracting characteristics of power flow at each node of the power system. In order to abstract fault characteristics, neocognitron in which symmetrical three phase decomposition and data normalization are calculated using power flow at each node is introduced. Thus, the impacts of voltage grade and unbalanced load can be removed. Since each neocognitron corresponds to one node of the power system, hierarchical autonomous decentralization can be realized. Therefore, the proposed approach can be applied to a large power system. Fault point location is done by BP network. Since the neuro of BP network only corresponds to the nodes of the topologized power system, the training of the neural network can be performed independently. From this point of view, the applicability and flexibility of proposed approach are high. The effectiveness and applicability of the proposed approach are demonstrated on a simple power system model.

    Original languageEnglish
    Pages (from-to)30-41
    Number of pages12
    JournalElectrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)
    Volume117
    Issue number1
    Publication statusPublished - 1996

    Fingerprint

    Hierarchical systems
    Topology
    Neural networks
    Decomposition
    Electric potential

    Keywords

    • BP network
    • Fault analysis
    • Fault point identification
    • Fault type
    • Neocognitron
    • Pattern identification

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    Cite this

    An approach to fault point identification using neocognitron and BP neural network. / Zhou, Diwei; Yasuda, Keichiro; Yokoyama, Ryuichi.

    In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), Vol. 117, No. 1, 1996, p. 30-41.

    Research output: Contribution to journalArticle

    @article{f5d75283a6524874a0644eb201e79185,
    title = "An approach to fault point identification using neocognitron and BP neural network",
    abstract = "This paper presents a new approach to identity a fault point in a power system on real time. Based on the topology theory, the characteristics of a fault in the power system are treated as a pattern of the fault. Therefore, the calculation complexity of traditional approaches can be avoided. The aim of the proposed method is to identify fault points through directly analyzing the type of fault. Since each type of fault has each characteristic pattern of power flow, fault points can be identified by abstracting characteristics of power flow at each node of the power system. In order to abstract fault characteristics, neocognitron in which symmetrical three phase decomposition and data normalization are calculated using power flow at each node is introduced. Thus, the impacts of voltage grade and unbalanced load can be removed. Since each neocognitron corresponds to one node of the power system, hierarchical autonomous decentralization can be realized. Therefore, the proposed approach can be applied to a large power system. Fault point location is done by BP network. Since the neuro of BP network only corresponds to the nodes of the topologized power system, the training of the neural network can be performed independently. From this point of view, the applicability and flexibility of proposed approach are high. The effectiveness and applicability of the proposed approach are demonstrated on a simple power system model.",
    keywords = "BP network, Fault analysis, Fault point identification, Fault type, Neocognitron, Pattern identification",
    author = "Diwei Zhou and Keichiro Yasuda and Ryuichi Yokoyama",
    year = "1996",
    language = "English",
    volume = "117",
    pages = "30--41",
    journal = "Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)",
    issn = "0424-7760",
    publisher = "John Wiley and Sons Inc.",
    number = "1",

    }

    TY - JOUR

    T1 - An approach to fault point identification using neocognitron and BP neural network

    AU - Zhou, Diwei

    AU - Yasuda, Keichiro

    AU - Yokoyama, Ryuichi

    PY - 1996

    Y1 - 1996

    N2 - This paper presents a new approach to identity a fault point in a power system on real time. Based on the topology theory, the characteristics of a fault in the power system are treated as a pattern of the fault. Therefore, the calculation complexity of traditional approaches can be avoided. The aim of the proposed method is to identify fault points through directly analyzing the type of fault. Since each type of fault has each characteristic pattern of power flow, fault points can be identified by abstracting characteristics of power flow at each node of the power system. In order to abstract fault characteristics, neocognitron in which symmetrical three phase decomposition and data normalization are calculated using power flow at each node is introduced. Thus, the impacts of voltage grade and unbalanced load can be removed. Since each neocognitron corresponds to one node of the power system, hierarchical autonomous decentralization can be realized. Therefore, the proposed approach can be applied to a large power system. Fault point location is done by BP network. Since the neuro of BP network only corresponds to the nodes of the topologized power system, the training of the neural network can be performed independently. From this point of view, the applicability and flexibility of proposed approach are high. The effectiveness and applicability of the proposed approach are demonstrated on a simple power system model.

    AB - This paper presents a new approach to identity a fault point in a power system on real time. Based on the topology theory, the characteristics of a fault in the power system are treated as a pattern of the fault. Therefore, the calculation complexity of traditional approaches can be avoided. The aim of the proposed method is to identify fault points through directly analyzing the type of fault. Since each type of fault has each characteristic pattern of power flow, fault points can be identified by abstracting characteristics of power flow at each node of the power system. In order to abstract fault characteristics, neocognitron in which symmetrical three phase decomposition and data normalization are calculated using power flow at each node is introduced. Thus, the impacts of voltage grade and unbalanced load can be removed. Since each neocognitron corresponds to one node of the power system, hierarchical autonomous decentralization can be realized. Therefore, the proposed approach can be applied to a large power system. Fault point location is done by BP network. Since the neuro of BP network only corresponds to the nodes of the topologized power system, the training of the neural network can be performed independently. From this point of view, the applicability and flexibility of proposed approach are high. The effectiveness and applicability of the proposed approach are demonstrated on a simple power system model.

    KW - BP network

    KW - Fault analysis

    KW - Fault point identification

    KW - Fault type

    KW - Neocognitron

    KW - Pattern identification

    UR - http://www.scopus.com/inward/record.url?scp=0030197285&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0030197285&partnerID=8YFLogxK

    M3 - Article

    AN - SCOPUS:0030197285

    VL - 117

    SP - 30

    EP - 41

    JO - Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)

    JF - Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)

    SN - 0424-7760

    IS - 1

    ER -