An optimal configuration design method for HTS-SMES coils

So Noguchi; Atsushi Ishiyama; S. Akita; H. Kasahara; Y. Tatsuta; S. Kouso

doi:10.1109/TASC.2005.849337

An optimal configuration design method for HTS-SMES coils

So Noguchi, Atsushi Ishiyama, S. Akita, H. Kasahara, Y. Tatsuta, S. Kouso

School of Advanced Science and Engineering

Research output: Contribution to journal › Article › peer-review

35 Citations (Scopus)

Abstract

Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.

Original language	English
Pages (from-to)	1927-1930
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	15
Issue number	2 PART II
DOIs	https://doi.org/10.1109/TASC.2005.849337
Publication status	Published - 2005 Jun

Keywords

HTS tapes
Optimal configuration
SMES
Toroidal coil

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/TASC.2005.849337

Cite this

@article{8f1f34e2d3d2453ea6f010a6c194cf5a,

title = "An optimal configuration design method for HTS-SMES coils",

abstract = "Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.",

keywords = "HTS tapes, Optimal configuration, SMES, Toroidal coil",

author = "So Noguchi and Atsushi Ishiyama and S. Akita and H. Kasahara and Y. Tatsuta and S. Kouso",

year = "2005",

month = jun,

doi = "10.1109/TASC.2005.849337",

language = "English",

volume = "15",

pages = "1927--1930",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2 PART II",

}

TY - JOUR

T1 - An optimal configuration design method for HTS-SMES coils

AU - Noguchi, So

AU - Ishiyama, Atsushi

AU - Akita, S.

AU - Kasahara, H.

AU - Tatsuta, Y.

AU - Kouso, S.

PY - 2005/6

Y1 - 2005/6

N2 - Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.

AB - Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.

KW - HTS tapes

KW - Optimal configuration

KW - SMES

KW - Toroidal coil

UR - http://www.scopus.com/inward/record.url?scp=22044452696&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=22044452696&partnerID=8YFLogxK

U2 - 10.1109/TASC.2005.849337

DO - 10.1109/TASC.2005.849337

M3 - Article

AN - SCOPUS:22044452696

VL - 15

SP - 1927

EP - 1930

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 2 PART II

ER -

An optimal configuration design method for HTS-SMES coils

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this