Analysis of kinematic motion deviations of machining centers based on geometric tolerances

Naoki Satonaka, Nobuhiro Sugimura, Yoshitaka Tanimizu, Koji Iwamura

Research output: Contribution to conferencePaper

4 Citations (Scopus)

Abstract

Machine tools are recognized as key components of manufacturing systems, and product quality and cost mainly depend on performances of the machine tools. Much progress has been made in the machine tool technologies, aimed at improving the performances of the machine tools from various viewpoints, such as accuracy, reliability, productivity, and flexibility. The machining accuracy is one of the most important characteristics of the machine tools. From the viewpoints of the design and the manufacturing of the machine tools and their components, one of the important issues is to clarify the relationships between the kinematic motion deviations of the machine tools and the geometric tolerances of the components, such as the guide ways and the bearings. The objective of the present research is to establish mathematical models representing the kinematic motion deviations of the machine tools, on the basis of the geometric tolerances of the components, and to apply the models to theoretical analysis of the kinematic motion deviations of the machine tools.

Original languageEnglish
Publication statusPublished - 2007 Dec 1
Externally publishedYes
Event4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007 - Fukuoka, Japan
Duration: 2007 Nov 72007 Nov 9

Other

Other4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007
CountryJapan
CityFukuoka
Period07/11/707/11/9

    Fingerprint

Keywords

  • Geometric tolerances
  • Kinematic motion deviations
  • Machine tools
  • Shape generation motions

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Satonaka, N., Sugimura, N., Tanimizu, Y., & Iwamura, K. (2007). Analysis of kinematic motion deviations of machining centers based on geometric tolerances. Paper presented at 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007, Fukuoka, Japan.