Assurance evaluation technology for an autonomous decentralized ATC system

Masayuki Matsumoto, Kinji Mori

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

High transport capacity, high safety, and high reliability are required of train control systems in the high-density operational sections. The conventional systems operate as follows. The presence of a train is detected at each fixed section. Based on a decision as to whether or not the train should progress into the section, the velocity of the train is calculated by a centralized control system on the ground, and the result is communicated to the automatic train control device (ATC) of the train. It is difficult to realize high-density transport by this mechanism. This paper proposes an autonomous decentralized ATC system (D-ATC), which works as follows. Each train detects its own position. Only the position at which to stop is communicated from the ground to the train, and the velocity of the train is determined and controlled autonomously on the basis of this instruction. Then, an assurance technology is proposed in which trains with D-ATC are introduced stepwise without disturbing the operation of the whole system, and their testing in on-line operation is assured while they coexist with trains with the existing ATC. The on-train integration and the on-train separation technologies are presented as two methods of stepwise introduction and are evaluated from the viewpoint of assurance. Based on the results obtained in this study, a practical application was performed in the train control system of the JR East Yamanote/Keihin Tohoku line.

Original languageEnglish
Pages (from-to)46-55
Number of pages10
JournalElectronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi)
Volume88
Issue number10
DOIs
Publication statusPublished - 2005 Oct
Externally publishedYes

Fingerprint

Automatic train control
Control systems
Testing

Keywords

  • Assurance technology
  • Autonomous decentralized system
  • High-density operation section
  • Train control system

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

@article{6940358c1b294cf1aacbb0b05934971e,
title = "Assurance evaluation technology for an autonomous decentralized ATC system",
abstract = "High transport capacity, high safety, and high reliability are required of train control systems in the high-density operational sections. The conventional systems operate as follows. The presence of a train is detected at each fixed section. Based on a decision as to whether or not the train should progress into the section, the velocity of the train is calculated by a centralized control system on the ground, and the result is communicated to the automatic train control device (ATC) of the train. It is difficult to realize high-density transport by this mechanism. This paper proposes an autonomous decentralized ATC system (D-ATC), which works as follows. Each train detects its own position. Only the position at which to stop is communicated from the ground to the train, and the velocity of the train is determined and controlled autonomously on the basis of this instruction. Then, an assurance technology is proposed in which trains with D-ATC are introduced stepwise without disturbing the operation of the whole system, and their testing in on-line operation is assured while they coexist with trains with the existing ATC. The on-train integration and the on-train separation technologies are presented as two methods of stepwise introduction and are evaluated from the viewpoint of assurance. Based on the results obtained in this study, a practical application was performed in the train control system of the JR East Yamanote/Keihin Tohoku line.",
keywords = "Assurance technology, Autonomous decentralized system, High-density operation section, Train control system",
author = "Masayuki Matsumoto and Kinji Mori",
year = "2005",
month = "10",
doi = "10.1002/ecjc.20194",
language = "English",
volume = "88",
pages = "46--55",
journal = "Electronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi)",
issn = "1042-0967",
publisher = "John Wiley and Sons Inc.",
number = "10",

}

TY - JOUR

T1 - Assurance evaluation technology for an autonomous decentralized ATC system

AU - Matsumoto, Masayuki

AU - Mori, Kinji

PY - 2005/10

Y1 - 2005/10

N2 - High transport capacity, high safety, and high reliability are required of train control systems in the high-density operational sections. The conventional systems operate as follows. The presence of a train is detected at each fixed section. Based on a decision as to whether or not the train should progress into the section, the velocity of the train is calculated by a centralized control system on the ground, and the result is communicated to the automatic train control device (ATC) of the train. It is difficult to realize high-density transport by this mechanism. This paper proposes an autonomous decentralized ATC system (D-ATC), which works as follows. Each train detects its own position. Only the position at which to stop is communicated from the ground to the train, and the velocity of the train is determined and controlled autonomously on the basis of this instruction. Then, an assurance technology is proposed in which trains with D-ATC are introduced stepwise without disturbing the operation of the whole system, and their testing in on-line operation is assured while they coexist with trains with the existing ATC. The on-train integration and the on-train separation technologies are presented as two methods of stepwise introduction and are evaluated from the viewpoint of assurance. Based on the results obtained in this study, a practical application was performed in the train control system of the JR East Yamanote/Keihin Tohoku line.

AB - High transport capacity, high safety, and high reliability are required of train control systems in the high-density operational sections. The conventional systems operate as follows. The presence of a train is detected at each fixed section. Based on a decision as to whether or not the train should progress into the section, the velocity of the train is calculated by a centralized control system on the ground, and the result is communicated to the automatic train control device (ATC) of the train. It is difficult to realize high-density transport by this mechanism. This paper proposes an autonomous decentralized ATC system (D-ATC), which works as follows. Each train detects its own position. Only the position at which to stop is communicated from the ground to the train, and the velocity of the train is determined and controlled autonomously on the basis of this instruction. Then, an assurance technology is proposed in which trains with D-ATC are introduced stepwise without disturbing the operation of the whole system, and their testing in on-line operation is assured while they coexist with trains with the existing ATC. The on-train integration and the on-train separation technologies are presented as two methods of stepwise introduction and are evaluated from the viewpoint of assurance. Based on the results obtained in this study, a practical application was performed in the train control system of the JR East Yamanote/Keihin Tohoku line.

KW - Assurance technology

KW - Autonomous decentralized system

KW - High-density operation section

KW - Train control system

UR - http://www.scopus.com/inward/record.url?scp=18844391797&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=18844391797&partnerID=8YFLogxK

U2 - 10.1002/ecjc.20194

DO - 10.1002/ecjc.20194

M3 - Article

VL - 88

SP - 46

EP - 55

JO - Electronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi)

JF - Electronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi)

SN - 1042-0967

IS - 10

ER -