Automated identification and evaluation of subtechniques in classical-style roller skiing

Yoshihisa Sakurai, Zenya Fujita, Yusuke Ishige

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

The aims of the present study were (1) the development of an automated system for identifying classical-style ski subtechniques using angular rate sensors, and (2) the determination of the relationships among skiing velocity, ski course conditions, and ski subtechniques using a global navigation satellite system (GNSS) and the developed automated identification system. In the first experiment, the performance of a male cross-country skier was used to develop an automated system for identifying classical-style ski subtechniques. In the second one, the performances of five male and five female college cross-country skiers were used to validate the developed identification system. Each subject wore inertial sensors on both wrists and both roller skis, a small video camera on the helmet, and a GNSS receiver. All subjects skied a 6,900-m roller ski course using the classicalstyle at their maximum speed. The adopted subtechniques were identified by the automated method based on the data obtained from the sensors, and also by visual count from a video recording of the same ski run. The results showed that the automated identification method could be definitively used to recognize various subtechniques. Specifically, the system correctly identified 9,307 subtechnique cycles out of a total of 9,444 counted visually, which indicated an accuracy of 98.5%. We also measured the skiing velocity and the course slope using the GNSS module. The data was then used to determine the subtechnique distributions as a function of the inclination and skiing velocity. It was observed that male and female skiers selected double poling below 6.7° and 5.5° uphill, respectively. In addition, male and female skiers selected diagonal stride above 0.7° and 2.5° uphill, and below 5.4 m/s and 4.5 m/s velocity, respectively. These results implied that the subtechnique distribution plot could be used to analyze the technical characteristics of each skier.

Original languageEnglish
Pages (from-to)651-657
Number of pages7
JournalJournal of Sports Science and Medicine
Volume13
Issue number3
Publication statusPublished - 2014
Externally publishedYes

Fingerprint

Skiing
Head Protective Devices
Video Recording
Wrist

Keywords

  • Angular rate
  • Cross-country skiing
  • GPS/GNSS
  • Inertial sensor

ASJC Scopus subject areas

  • Orthopedics and Sports Medicine
  • Physical Therapy, Sports Therapy and Rehabilitation

Cite this

Automated identification and evaluation of subtechniques in classical-style roller skiing. / Sakurai, Yoshihisa; Fujita, Zenya; Ishige, Yusuke.

In: Journal of Sports Science and Medicine, Vol. 13, No. 3, 2014, p. 651-657.

Research output: Contribution to journalArticle

@article{14ac538844c24ee294095436e97f2f20,
title = "Automated identification and evaluation of subtechniques in classical-style roller skiing",
abstract = "The aims of the present study were (1) the development of an automated system for identifying classical-style ski subtechniques using angular rate sensors, and (2) the determination of the relationships among skiing velocity, ski course conditions, and ski subtechniques using a global navigation satellite system (GNSS) and the developed automated identification system. In the first experiment, the performance of a male cross-country skier was used to develop an automated system for identifying classical-style ski subtechniques. In the second one, the performances of five male and five female college cross-country skiers were used to validate the developed identification system. Each subject wore inertial sensors on both wrists and both roller skis, a small video camera on the helmet, and a GNSS receiver. All subjects skied a 6,900-m roller ski course using the classicalstyle at their maximum speed. The adopted subtechniques were identified by the automated method based on the data obtained from the sensors, and also by visual count from a video recording of the same ski run. The results showed that the automated identification method could be definitively used to recognize various subtechniques. Specifically, the system correctly identified 9,307 subtechnique cycles out of a total of 9,444 counted visually, which indicated an accuracy of 98.5{\%}. We also measured the skiing velocity and the course slope using the GNSS module. The data was then used to determine the subtechnique distributions as a function of the inclination and skiing velocity. It was observed that male and female skiers selected double poling below 6.7° and 5.5° uphill, respectively. In addition, male and female skiers selected diagonal stride above 0.7° and 2.5° uphill, and below 5.4 m/s and 4.5 m/s velocity, respectively. These results implied that the subtechnique distribution plot could be used to analyze the technical characteristics of each skier.",
keywords = "Angular rate, Cross-country skiing, GPS/GNSS, Inertial sensor",
author = "Yoshihisa Sakurai and Zenya Fujita and Yusuke Ishige",
year = "2014",
language = "English",
volume = "13",
pages = "651--657",
journal = "Journal of Sports Science and Medicine",
issn = "1303-2968",
publisher = "Department of Sports Medicine, Medical Faculty of Uludag University",
number = "3",

}

TY - JOUR

T1 - Automated identification and evaluation of subtechniques in classical-style roller skiing

AU - Sakurai, Yoshihisa

AU - Fujita, Zenya

AU - Ishige, Yusuke

PY - 2014

Y1 - 2014

N2 - The aims of the present study were (1) the development of an automated system for identifying classical-style ski subtechniques using angular rate sensors, and (2) the determination of the relationships among skiing velocity, ski course conditions, and ski subtechniques using a global navigation satellite system (GNSS) and the developed automated identification system. In the first experiment, the performance of a male cross-country skier was used to develop an automated system for identifying classical-style ski subtechniques. In the second one, the performances of five male and five female college cross-country skiers were used to validate the developed identification system. Each subject wore inertial sensors on both wrists and both roller skis, a small video camera on the helmet, and a GNSS receiver. All subjects skied a 6,900-m roller ski course using the classicalstyle at their maximum speed. The adopted subtechniques were identified by the automated method based on the data obtained from the sensors, and also by visual count from a video recording of the same ski run. The results showed that the automated identification method could be definitively used to recognize various subtechniques. Specifically, the system correctly identified 9,307 subtechnique cycles out of a total of 9,444 counted visually, which indicated an accuracy of 98.5%. We also measured the skiing velocity and the course slope using the GNSS module. The data was then used to determine the subtechnique distributions as a function of the inclination and skiing velocity. It was observed that male and female skiers selected double poling below 6.7° and 5.5° uphill, respectively. In addition, male and female skiers selected diagonal stride above 0.7° and 2.5° uphill, and below 5.4 m/s and 4.5 m/s velocity, respectively. These results implied that the subtechnique distribution plot could be used to analyze the technical characteristics of each skier.

AB - The aims of the present study were (1) the development of an automated system for identifying classical-style ski subtechniques using angular rate sensors, and (2) the determination of the relationships among skiing velocity, ski course conditions, and ski subtechniques using a global navigation satellite system (GNSS) and the developed automated identification system. In the first experiment, the performance of a male cross-country skier was used to develop an automated system for identifying classical-style ski subtechniques. In the second one, the performances of five male and five female college cross-country skiers were used to validate the developed identification system. Each subject wore inertial sensors on both wrists and both roller skis, a small video camera on the helmet, and a GNSS receiver. All subjects skied a 6,900-m roller ski course using the classicalstyle at their maximum speed. The adopted subtechniques were identified by the automated method based on the data obtained from the sensors, and also by visual count from a video recording of the same ski run. The results showed that the automated identification method could be definitively used to recognize various subtechniques. Specifically, the system correctly identified 9,307 subtechnique cycles out of a total of 9,444 counted visually, which indicated an accuracy of 98.5%. We also measured the skiing velocity and the course slope using the GNSS module. The data was then used to determine the subtechnique distributions as a function of the inclination and skiing velocity. It was observed that male and female skiers selected double poling below 6.7° and 5.5° uphill, respectively. In addition, male and female skiers selected diagonal stride above 0.7° and 2.5° uphill, and below 5.4 m/s and 4.5 m/s velocity, respectively. These results implied that the subtechnique distribution plot could be used to analyze the technical characteristics of each skier.

KW - Angular rate

KW - Cross-country skiing

KW - GPS/GNSS

KW - Inertial sensor

UR - http://www.scopus.com/inward/record.url?scp=84905746393&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84905746393&partnerID=8YFLogxK

M3 - Article

VL - 13

SP - 651

EP - 657

JO - Journal of Sports Science and Medicine

JF - Journal of Sports Science and Medicine

SN - 1303-2968

IS - 3

ER -