CAD SYSTEMS FOR VLSI IN JAPAN.

Tsuneta Sudo, Tatsuo Ohtsuki, Satoshi Goto

    Research output: Contribution to journalArticle

    12 Citations (Scopus)

    Abstract

    With the advent of the VLSI era, computer-aided design (CAD) is increasing its importance, and much effort is now being expended on CAD by many IC manufacturers and laboratories in Japan. This paper reviews the historical aspect of the CAD systems developed in this field, and describes the current status of VLSI CAD systems and technologies, from device to system levels, in Japan. The CAD development activities for IC's were initiated in the late 1960's. At present, VLSI CAD systems and related CAD technologies in Japan seem to be in the adolescent stage - partly capable of practical use and partly still in the immature state.

    Original languageEnglish
    Pages (from-to)129-143
    Number of pages15
    JournalProceedings of the IEEE
    Volume71
    Issue number1
    DOIs
    Publication statusPublished - 1983 Jan

    Fingerprint

    Computer aided design
    Computer systems

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    Cite this

    CAD SYSTEMS FOR VLSI IN JAPAN. / Sudo, Tsuneta; Ohtsuki, Tatsuo; Goto, Satoshi.

    In: Proceedings of the IEEE, Vol. 71, No. 1, 01.1983, p. 129-143.

    Research output: Contribution to journalArticle

    Sudo, T, Ohtsuki, T & Goto, S 1983, 'CAD SYSTEMS FOR VLSI IN JAPAN.', Proceedings of the IEEE, vol. 71, no. 1, pp. 129-143. https://doi.org/10.1109/PROC.1983.12534
    Sudo, Tsuneta ; Ohtsuki, Tatsuo ; Goto, Satoshi. / CAD SYSTEMS FOR VLSI IN JAPAN. In: Proceedings of the IEEE. 1983 ; Vol. 71, No. 1. pp. 129-143.
    @article{d079890679e7445491bc87abbf6c9533,
    title = "CAD SYSTEMS FOR VLSI IN JAPAN.",
    abstract = "With the advent of the VLSI era, computer-aided design (CAD) is increasing its importance, and much effort is now being expended on CAD by many IC manufacturers and laboratories in Japan. This paper reviews the historical aspect of the CAD systems developed in this field, and describes the current status of VLSI CAD systems and technologies, from device to system levels, in Japan. The CAD development activities for IC's were initiated in the late 1960's. At present, VLSI CAD systems and related CAD technologies in Japan seem to be in the adolescent stage - partly capable of practical use and partly still in the immature state.",
    author = "Tsuneta Sudo and Tatsuo Ohtsuki and Satoshi Goto",
    year = "1983",
    month = "1",
    doi = "10.1109/PROC.1983.12534",
    language = "English",
    volume = "71",
    pages = "129--143",
    journal = "Proceedings of the IEEE",
    issn = "0018-9219",
    publisher = "Institute of Electrical and Electronics Engineers Inc.",
    number = "1",

    }

    TY - JOUR

    T1 - CAD SYSTEMS FOR VLSI IN JAPAN.

    AU - Sudo, Tsuneta

    AU - Ohtsuki, Tatsuo

    AU - Goto, Satoshi

    PY - 1983/1

    Y1 - 1983/1

    N2 - With the advent of the VLSI era, computer-aided design (CAD) is increasing its importance, and much effort is now being expended on CAD by many IC manufacturers and laboratories in Japan. This paper reviews the historical aspect of the CAD systems developed in this field, and describes the current status of VLSI CAD systems and technologies, from device to system levels, in Japan. The CAD development activities for IC's were initiated in the late 1960's. At present, VLSI CAD systems and related CAD technologies in Japan seem to be in the adolescent stage - partly capable of practical use and partly still in the immature state.

    AB - With the advent of the VLSI era, computer-aided design (CAD) is increasing its importance, and much effort is now being expended on CAD by many IC manufacturers and laboratories in Japan. This paper reviews the historical aspect of the CAD systems developed in this field, and describes the current status of VLSI CAD systems and technologies, from device to system levels, in Japan. The CAD development activities for IC's were initiated in the late 1960's. At present, VLSI CAD systems and related CAD technologies in Japan seem to be in the adolescent stage - partly capable of practical use and partly still in the immature state.

    UR - http://www.scopus.com/inward/record.url?scp=0020497876&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0020497876&partnerID=8YFLogxK

    U2 - 10.1109/PROC.1983.12534

    DO - 10.1109/PROC.1983.12534

    M3 - Article

    VL - 71

    SP - 129

    EP - 143

    JO - Proceedings of the IEEE

    JF - Proceedings of the IEEE

    SN - 0018-9219

    IS - 1

    ER -