Characteristics of the Short Primary Linear Induction Motor with the Partially Adopted Wound Secondary Member

Yushi Kamiya, Koji Fukaya, Jeon Woojin, Takashi Onuki

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper describes single-sided Linear Induction Motors (LIMs) with a short primary member. In the machines, a solid plate conductor is usually used for the secondary. In this study, we propose partial adoption of wound secondary members in the LIMs. Characteristics of the machine are summarized as follows: 1) Basic characteristics: The wound secondary shortens the magnetic clearance and makes characteristics of the machine superior compared with the solid-plate conductor one. Further, applying the proportional shifting method, we can improve thrust and efficiency characteristics. 2) Primary and secondary winding scheme: Parallel connection is proper for the primary and independently short-circuited scheme for the secondary to obtain stable performance. 3) Transient phenomena at the boundary between the wound secondary and the solid-plate one: In the boundary, especially at the end of the solid-plate conductor, undesirable phenomena develop. Thus, we propose a novel boundary structure, which yields stable transient performances.

Original languageEnglish
Pages (from-to)526-531
Number of pages6
JournalIEEJ Transactions on Industry Applications
Volume120
Issue number4
DOIs
Publication statusPublished - 2000

Fingerprint

Linear motors
Induction motors

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Characteristics of the Short Primary Linear Induction Motor with the Partially Adopted Wound Secondary Member. / Kamiya, Yushi; Fukaya, Koji; Woojin, Jeon; Onuki, Takashi.

In: IEEJ Transactions on Industry Applications, Vol. 120, No. 4, 2000, p. 526-531.

Research output: Contribution to journalArticle

@article{933e37c786944b69a1d6bb69a9715cf6,
title = "Characteristics of the Short Primary Linear Induction Motor with the Partially Adopted Wound Secondary Member",
abstract = "This paper describes single-sided Linear Induction Motors (LIMs) with a short primary member. In the machines, a solid plate conductor is usually used for the secondary. In this study, we propose partial adoption of wound secondary members in the LIMs. Characteristics of the machine are summarized as follows: 1) Basic characteristics: The wound secondary shortens the magnetic clearance and makes characteristics of the machine superior compared with the solid-plate conductor one. Further, applying the proportional shifting method, we can improve thrust and efficiency characteristics. 2) Primary and secondary winding scheme: Parallel connection is proper for the primary and independently short-circuited scheme for the secondary to obtain stable performance. 3) Transient phenomena at the boundary between the wound secondary and the solid-plate one: In the boundary, especially at the end of the solid-plate conductor, undesirable phenomena develop. Thus, we propose a novel boundary structure, which yields stable transient performances.",
author = "Yushi Kamiya and Koji Fukaya and Jeon Woojin and Takashi Onuki",
year = "2000",
doi = "10.1541/ieejias.120.526",
language = "English",
volume = "120",
pages = "526--531",
journal = "IEEJ Transactions on Industry Applications",
issn = "0913-6339",
publisher = "The Institute of Electrical Engineers of Japan",
number = "4",

}

TY - JOUR

T1 - Characteristics of the Short Primary Linear Induction Motor with the Partially Adopted Wound Secondary Member

AU - Kamiya, Yushi

AU - Fukaya, Koji

AU - Woojin, Jeon

AU - Onuki, Takashi

PY - 2000

Y1 - 2000

N2 - This paper describes single-sided Linear Induction Motors (LIMs) with a short primary member. In the machines, a solid plate conductor is usually used for the secondary. In this study, we propose partial adoption of wound secondary members in the LIMs. Characteristics of the machine are summarized as follows: 1) Basic characteristics: The wound secondary shortens the magnetic clearance and makes characteristics of the machine superior compared with the solid-plate conductor one. Further, applying the proportional shifting method, we can improve thrust and efficiency characteristics. 2) Primary and secondary winding scheme: Parallel connection is proper for the primary and independently short-circuited scheme for the secondary to obtain stable performance. 3) Transient phenomena at the boundary between the wound secondary and the solid-plate one: In the boundary, especially at the end of the solid-plate conductor, undesirable phenomena develop. Thus, we propose a novel boundary structure, which yields stable transient performances.

AB - This paper describes single-sided Linear Induction Motors (LIMs) with a short primary member. In the machines, a solid plate conductor is usually used for the secondary. In this study, we propose partial adoption of wound secondary members in the LIMs. Characteristics of the machine are summarized as follows: 1) Basic characteristics: The wound secondary shortens the magnetic clearance and makes characteristics of the machine superior compared with the solid-plate conductor one. Further, applying the proportional shifting method, we can improve thrust and efficiency characteristics. 2) Primary and secondary winding scheme: Parallel connection is proper for the primary and independently short-circuited scheme for the secondary to obtain stable performance. 3) Transient phenomena at the boundary between the wound secondary and the solid-plate one: In the boundary, especially at the end of the solid-plate conductor, undesirable phenomena develop. Thus, we propose a novel boundary structure, which yields stable transient performances.

UR - http://www.scopus.com/inward/record.url?scp=85024730989&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024730989&partnerID=8YFLogxK

U2 - 10.1541/ieejias.120.526

DO - 10.1541/ieejias.120.526

M3 - Article

VL - 120

SP - 526

EP - 531

JO - IEEJ Transactions on Industry Applications

JF - IEEJ Transactions on Industry Applications

SN - 0913-6339

IS - 4

ER -