Characterization of an Ir-Hf alloy coating as a bond coat material

Koichiro Kamiya, Hideyuki Murakami

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

High temperature oxidation resistance and the topcoat spallation lives of Ir-Hf coated and aluminized Ni-base superalloys are investigated in comparison to Pt coated and aluminized ones. An Ir-Hf binary alloy, proposed as a novel metallic bond coat material, was coated on a Ni-base single crystal superalloy TMS-82 + using electron beam physical vapor deposition followed by a conventional Al pack cementation process. Although cyclic oxidation tests revealed that these Ir-Hf coated and aluminized specimens did not exhibit as good oxidation resistance as the Pt coated and aluminized specimens, formation of TCP phases in the substrate is suppressed by the presence of the Ir-Hf enriched layer. On the other hand, thermal cyclic tests for YSZ coated specimens revealed that Ir-Hf coated and aluminized specimens showed better adhesion to the ceramic top coat layer and demonstrated a longer spallation life than Pt-coated and aluminized specimens, which can be explained by the formation of Al 2O 3 and HfO 2 two-phase structure in the TGO layer. These results indicated that the Ir-Hf alloy system is promising as a new metallic bond coat material for high temperature structural materials.

Original languageEnglish
Pages (from-to)73-79
Number of pages7
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume69
Issue number1
DOIs
Publication statusPublished - 2005 Jan 1
Externally publishedYes

Fingerprint

Oxidation resistance
Superalloys
Coated materials
coatings
Coatings
Thermooxidation
Binary alloys
Physical vapor deposition
Phase structure
oxidation resistance
heat resistant alloys
spallation
Electron beams
Adhesion
Single crystals
Oxidation
Substrates
cementation
binary alloys
yttria-stabilized zirconia

Keywords

  • Aluminizing
  • Electron beam physial vapor deposition method (EB-PVD)
  • Indium-hafnium alloy
  • Nickel-base single crystal superalloy

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Cite this

Characterization of an Ir-Hf alloy coating as a bond coat material. / Kamiya, Koichiro; Murakami, Hideyuki.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 69, No. 1, 01.01.2005, p. 73-79.

Research output: Contribution to journalArticle

@article{a54d47c9c8e24179b49dcf66b1d2c25f,
title = "Characterization of an Ir-Hf alloy coating as a bond coat material",
abstract = "High temperature oxidation resistance and the topcoat spallation lives of Ir-Hf coated and aluminized Ni-base superalloys are investigated in comparison to Pt coated and aluminized ones. An Ir-Hf binary alloy, proposed as a novel metallic bond coat material, was coated on a Ni-base single crystal superalloy TMS-82 + using electron beam physical vapor deposition followed by a conventional Al pack cementation process. Although cyclic oxidation tests revealed that these Ir-Hf coated and aluminized specimens did not exhibit as good oxidation resistance as the Pt coated and aluminized specimens, formation of TCP phases in the substrate is suppressed by the presence of the Ir-Hf enriched layer. On the other hand, thermal cyclic tests for YSZ coated specimens revealed that Ir-Hf coated and aluminized specimens showed better adhesion to the ceramic top coat layer and demonstrated a longer spallation life than Pt-coated and aluminized specimens, which can be explained by the formation of Al 2O 3 and HfO 2 two-phase structure in the TGO layer. These results indicated that the Ir-Hf alloy system is promising as a new metallic bond coat material for high temperature structural materials.",
keywords = "Aluminizing, Electron beam physial vapor deposition method (EB-PVD), Indium-hafnium alloy, Nickel-base single crystal superalloy",
author = "Koichiro Kamiya and Hideyuki Murakami",
year = "2005",
month = "1",
day = "1",
doi = "10.2320/jinstmet.69.73",
language = "English",
volume = "69",
pages = "73--79",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "Japan Institute of Metals (JIM)",
number = "1",

}

TY - JOUR

T1 - Characterization of an Ir-Hf alloy coating as a bond coat material

AU - Kamiya, Koichiro

AU - Murakami, Hideyuki

PY - 2005/1/1

Y1 - 2005/1/1

N2 - High temperature oxidation resistance and the topcoat spallation lives of Ir-Hf coated and aluminized Ni-base superalloys are investigated in comparison to Pt coated and aluminized ones. An Ir-Hf binary alloy, proposed as a novel metallic bond coat material, was coated on a Ni-base single crystal superalloy TMS-82 + using electron beam physical vapor deposition followed by a conventional Al pack cementation process. Although cyclic oxidation tests revealed that these Ir-Hf coated and aluminized specimens did not exhibit as good oxidation resistance as the Pt coated and aluminized specimens, formation of TCP phases in the substrate is suppressed by the presence of the Ir-Hf enriched layer. On the other hand, thermal cyclic tests for YSZ coated specimens revealed that Ir-Hf coated and aluminized specimens showed better adhesion to the ceramic top coat layer and demonstrated a longer spallation life than Pt-coated and aluminized specimens, which can be explained by the formation of Al 2O 3 and HfO 2 two-phase structure in the TGO layer. These results indicated that the Ir-Hf alloy system is promising as a new metallic bond coat material for high temperature structural materials.

AB - High temperature oxidation resistance and the topcoat spallation lives of Ir-Hf coated and aluminized Ni-base superalloys are investigated in comparison to Pt coated and aluminized ones. An Ir-Hf binary alloy, proposed as a novel metallic bond coat material, was coated on a Ni-base single crystal superalloy TMS-82 + using electron beam physical vapor deposition followed by a conventional Al pack cementation process. Although cyclic oxidation tests revealed that these Ir-Hf coated and aluminized specimens did not exhibit as good oxidation resistance as the Pt coated and aluminized specimens, formation of TCP phases in the substrate is suppressed by the presence of the Ir-Hf enriched layer. On the other hand, thermal cyclic tests for YSZ coated specimens revealed that Ir-Hf coated and aluminized specimens showed better adhesion to the ceramic top coat layer and demonstrated a longer spallation life than Pt-coated and aluminized specimens, which can be explained by the formation of Al 2O 3 and HfO 2 two-phase structure in the TGO layer. These results indicated that the Ir-Hf alloy system is promising as a new metallic bond coat material for high temperature structural materials.

KW - Aluminizing

KW - Electron beam physial vapor deposition method (EB-PVD)

KW - Indium-hafnium alloy

KW - Nickel-base single crystal superalloy

UR - http://www.scopus.com/inward/record.url?scp=14844357254&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=14844357254&partnerID=8YFLogxK

U2 - 10.2320/jinstmet.69.73

DO - 10.2320/jinstmet.69.73

M3 - Article

VL - 69

SP - 73

EP - 79

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 1

ER -