Comparison of simulated structural deformation with experimental results after Wingspan stenting

Motoaki Fujimoto, Yasuhiro Shobayashi, Satoshi Tateshima, Ryo Sudo, Kazuo Tanishita, Fernando Viñuela

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Objectives: Biomechanical stress distribution correlates with the biological responses after stenting. Computational analyses have contributed to the optimization of stent geometry. In particular, structural analysis based on pre-operative angiography can be used to predict the stent-artery interaction before endovascular treatments. However, the simulated results need to be validated. In this report, we compared the simulated arterial structure with post-operative images after an intracranial Wingspan stent. Methods: A Wingspan stent was deployed at a slightly curved ascending pharyngeal artery (APA) in the swine. Using a finite element method (FEM), the configuration after stenting was simulated and quantitatively compared with post-procedural 3D angiography. Results: The finite element analysis demonstrated arterial straightening after stenting. The simulated images were similar to the experimental results with respect to the curvature index of the center line and the cross-sectional areas. Conclusion: We assessed the simulated structural deformation after Wingspan stenting, by comparison with experimental results.

Original languageEnglish
Pages (from-to)752-756
Number of pages5
JournalNeurological Research
Volume36
Issue number8
DOIs
Publication statusPublished - 2014
Externally publishedYes

Fingerprint

Stents
Angiography
Arteries
Finite Element Analysis
Swine

Keywords

  • Biomechanical response
  • Intracranial stent
  • Structural deformation
  • Wingspan stent

ASJC Scopus subject areas

  • Clinical Neurology
  • Neurology

Cite this

Fujimoto, M., Shobayashi, Y., Tateshima, S., Sudo, R., Tanishita, K., & Viñuela, F. (2014). Comparison of simulated structural deformation with experimental results after Wingspan stenting. Neurological Research, 36(8), 752-756. https://doi.org/10.1179/1743132813Y.0000000294

Comparison of simulated structural deformation with experimental results after Wingspan stenting. / Fujimoto, Motoaki; Shobayashi, Yasuhiro; Tateshima, Satoshi; Sudo, Ryo; Tanishita, Kazuo; Viñuela, Fernando.

In: Neurological Research, Vol. 36, No. 8, 2014, p. 752-756.

Research output: Contribution to journalArticle

Fujimoto, M, Shobayashi, Y, Tateshima, S, Sudo, R, Tanishita, K & Viñuela, F 2014, 'Comparison of simulated structural deformation with experimental results after Wingspan stenting', Neurological Research, vol. 36, no. 8, pp. 752-756. https://doi.org/10.1179/1743132813Y.0000000294
Fujimoto, Motoaki ; Shobayashi, Yasuhiro ; Tateshima, Satoshi ; Sudo, Ryo ; Tanishita, Kazuo ; Viñuela, Fernando. / Comparison of simulated structural deformation with experimental results after Wingspan stenting. In: Neurological Research. 2014 ; Vol. 36, No. 8. pp. 752-756.
@article{e00eab92c5fe44749bbae0a6bae533f3,
title = "Comparison of simulated structural deformation with experimental results after Wingspan stenting",
abstract = "Objectives: Biomechanical stress distribution correlates with the biological responses after stenting. Computational analyses have contributed to the optimization of stent geometry. In particular, structural analysis based on pre-operative angiography can be used to predict the stent-artery interaction before endovascular treatments. However, the simulated results need to be validated. In this report, we compared the simulated arterial structure with post-operative images after an intracranial Wingspan stent. Methods: A Wingspan stent was deployed at a slightly curved ascending pharyngeal artery (APA) in the swine. Using a finite element method (FEM), the configuration after stenting was simulated and quantitatively compared with post-procedural 3D angiography. Results: The finite element analysis demonstrated arterial straightening after stenting. The simulated images were similar to the experimental results with respect to the curvature index of the center line and the cross-sectional areas. Conclusion: We assessed the simulated structural deformation after Wingspan stenting, by comparison with experimental results.",
keywords = "Biomechanical response, Intracranial stent, Structural deformation, Wingspan stent",
author = "Motoaki Fujimoto and Yasuhiro Shobayashi and Satoshi Tateshima and Ryo Sudo and Kazuo Tanishita and Fernando Vi{\~n}uela",
year = "2014",
doi = "10.1179/1743132813Y.0000000294",
language = "English",
volume = "36",
pages = "752--756",
journal = "Neurological Research",
issn = "0161-6412",
publisher = "Maney Publishing",
number = "8",

}

TY - JOUR

T1 - Comparison of simulated structural deformation with experimental results after Wingspan stenting

AU - Fujimoto, Motoaki

AU - Shobayashi, Yasuhiro

AU - Tateshima, Satoshi

AU - Sudo, Ryo

AU - Tanishita, Kazuo

AU - Viñuela, Fernando

PY - 2014

Y1 - 2014

N2 - Objectives: Biomechanical stress distribution correlates with the biological responses after stenting. Computational analyses have contributed to the optimization of stent geometry. In particular, structural analysis based on pre-operative angiography can be used to predict the stent-artery interaction before endovascular treatments. However, the simulated results need to be validated. In this report, we compared the simulated arterial structure with post-operative images after an intracranial Wingspan stent. Methods: A Wingspan stent was deployed at a slightly curved ascending pharyngeal artery (APA) in the swine. Using a finite element method (FEM), the configuration after stenting was simulated and quantitatively compared with post-procedural 3D angiography. Results: The finite element analysis demonstrated arterial straightening after stenting. The simulated images were similar to the experimental results with respect to the curvature index of the center line and the cross-sectional areas. Conclusion: We assessed the simulated structural deformation after Wingspan stenting, by comparison with experimental results.

AB - Objectives: Biomechanical stress distribution correlates with the biological responses after stenting. Computational analyses have contributed to the optimization of stent geometry. In particular, structural analysis based on pre-operative angiography can be used to predict the stent-artery interaction before endovascular treatments. However, the simulated results need to be validated. In this report, we compared the simulated arterial structure with post-operative images after an intracranial Wingspan stent. Methods: A Wingspan stent was deployed at a slightly curved ascending pharyngeal artery (APA) in the swine. Using a finite element method (FEM), the configuration after stenting was simulated and quantitatively compared with post-procedural 3D angiography. Results: The finite element analysis demonstrated arterial straightening after stenting. The simulated images were similar to the experimental results with respect to the curvature index of the center line and the cross-sectional areas. Conclusion: We assessed the simulated structural deformation after Wingspan stenting, by comparison with experimental results.

KW - Biomechanical response

KW - Intracranial stent

KW - Structural deformation

KW - Wingspan stent

UR - http://www.scopus.com/inward/record.url?scp=84903724410&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84903724410&partnerID=8YFLogxK

U2 - 10.1179/1743132813Y.0000000294

DO - 10.1179/1743132813Y.0000000294

M3 - Article

VL - 36

SP - 752

EP - 756

JO - Neurological Research

JF - Neurological Research

SN - 0161-6412

IS - 8

ER -