CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS.

R. W. Hood, T. M. Wright, T. Fukubayashi, A. H. Burstein

Research output: Chapter in Book/Report/Conference proceedingChapter

5 Citations (Scopus)

Abstract

Second generation total knee designs are of two basic types: minimal conformity, and moderate conformity. The authors measured the parameters of areas and pressure in current prosthetic designs and compared them to the physical properties of UHMWPE.

Original languageEnglish
Title of host publicationAmerican Society of Mechanical Engineers, Applied Mechanics Division, AMD
PublisherASME
Pages233-236
Number of pages4
Volume43
Publication statusPublished - 1981
Externally publishedYes
EventBiomech Symp, Presented at the Jt ASME/ASCE Mech Conf - Boulder, CO, USA
Duration: 1981 Jun 221981 Jun 24

Other

OtherBiomech Symp, Presented at the Jt ASME/ASCE Mech Conf
CityBoulder, CO, USA
Period81/6/2281/6/24

Fingerprint

Pressure distribution
Ultrahigh molecular weight polyethylenes
Prosthetics
Physical properties

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Hood, R. W., Wright, T. M., Fukubayashi, T., & Burstein, A. H. (1981). CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS. In American Society of Mechanical Engineers, Applied Mechanics Division, AMD (Vol. 43, pp. 233-236). ASME.

CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS. / Hood, R. W.; Wright, T. M.; Fukubayashi, T.; Burstein, A. H.

American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Vol. 43 ASME, 1981. p. 233-236.

Research output: Chapter in Book/Report/Conference proceedingChapter

Hood, RW, Wright, TM, Fukubayashi, T & Burstein, AH 1981, CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS. in American Society of Mechanical Engineers, Applied Mechanics Division, AMD. vol. 43, ASME, pp. 233-236, Biomech Symp, Presented at the Jt ASME/ASCE Mech Conf, Boulder, CO, USA, 81/6/22.
Hood RW, Wright TM, Fukubayashi T, Burstein AH. CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS. In American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Vol. 43. ASME. 1981. p. 233-236
Hood, R. W. ; Wright, T. M. ; Fukubayashi, T. ; Burstein, A. H. / CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS. American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Vol. 43 ASME, 1981. pp. 233-236
@inbook{56bb206715cd4f9fa31863034e07afbd,
title = "CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS.",
abstract = "Second generation total knee designs are of two basic types: minimal conformity, and moderate conformity. The authors measured the parameters of areas and pressure in current prosthetic designs and compared them to the physical properties of UHMWPE.",
author = "Hood, {R. W.} and Wright, {T. M.} and T. Fukubayashi and Burstein, {A. H.}",
year = "1981",
language = "English",
volume = "43",
pages = "233--236",
booktitle = "American Society of Mechanical Engineers, Applied Mechanics Division, AMD",
publisher = "ASME",

}

TY - CHAP

T1 - CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS.

AU - Hood, R. W.

AU - Wright, T. M.

AU - Fukubayashi, T.

AU - Burstein, A. H.

PY - 1981

Y1 - 1981

N2 - Second generation total knee designs are of two basic types: minimal conformity, and moderate conformity. The authors measured the parameters of areas and pressure in current prosthetic designs and compared them to the physical properties of UHMWPE.

AB - Second generation total knee designs are of two basic types: minimal conformity, and moderate conformity. The authors measured the parameters of areas and pressure in current prosthetic designs and compared them to the physical properties of UHMWPE.

UR - http://www.scopus.com/inward/record.url?scp=0019438208&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0019438208&partnerID=8YFLogxK

M3 - Chapter

VL - 43

SP - 233

EP - 236

BT - American Society of Mechanical Engineers, Applied Mechanics Division, AMD

PB - ASME

ER -