Control of grain density in FePt-C granular thin films during initial growth

Ippei Suzuki*, Jian Wang, Yukiko K. Takahashi, Kazuhiro Hono

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

6 Citations (Scopus)

Abstract

Herein, we report a systematic study on the microstructure evolution of FePt-C granular films grown on MgO(0 0 1) single-crystalline substrates, especially during the initial growth stage. The number density of the grains during the nucleation stage is strongly affected by the growth temperature, reaching 40 Tgrain/in2 at <200 °C and decreasing with further increasing temperature. The addition of carbon (C) as a segregant substantially reduced the density. Despite the high number density during the nucleation stage, the density was dramatically reduced with subsequent growth of the FePt-C film. The possible reason for the reduction in the grain density is the surface diffusion of the C added to enhance grain separation. Controlling the growth conditions rather than the nucleation stage is key to increasing the areal density of FePt-C granular films to develop heat-assisted magnetic recording media.

Original languageEnglish
Article number166418
JournalJournal of Magnetism and Magnetic Materials
Volume500
DOIs
Publication statusPublished - 2020 Apr 15
Externally publishedYes

Keywords

  • FePt
  • Grain density
  • Granular films
  • Magnetic recording

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics

Fingerprint

Dive into the research topics of 'Control of grain density in FePt-C granular thin films during initial growth'. Together they form a unique fingerprint.

Cite this