Coordination of torsional controller for turbine-generator system operation

T. Kakinoki, R. Yokoyama, G. Fujita, K. Koyanagi, T. Funabashi

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Abstract

    Under the action of disturbance in power system, turbine-generator shaft are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in an actual generation system is difficult technically. On the other hand, measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a parametric analysis for shaft torque estimator based on observer against changes of load conditions in-house type generation system. Firstly, this paper proposes shaft torque observer for rotating type generation system, and discusses about relation between observation signals and accuracy of the estimated values. Secondly, a parametric analysis is conducted for shaft torque estimator against load change.

    Original languageEnglish
    Title of host publicationProceedings of the Universities Power Engineering Conference
    Pages23-27
    Number of pages5
    Volume37
    Publication statusPublished - 2002
    EventUPEC 2002, 37th International Universities' Power Engineering Conference - Stafford
    Duration: 2002 Sep 92002 Sep 11

    Other

    OtherUPEC 2002, 37th International Universities' Power Engineering Conference
    CityStafford
    Period02/9/902/9/11

    Fingerprint

    Turbogenerators
    Torque
    Controllers
    Loads (forces)

    ASJC Scopus subject areas

    • Engineering(all)
    • Energy(all)

    Cite this

    Kakinoki, T., Yokoyama, R., Fujita, G., Koyanagi, K., & Funabashi, T. (2002). Coordination of torsional controller for turbine-generator system operation. In Proceedings of the Universities Power Engineering Conference (Vol. 37, pp. 23-27)

    Coordination of torsional controller for turbine-generator system operation. / Kakinoki, T.; Yokoyama, R.; Fujita, G.; Koyanagi, K.; Funabashi, T.

    Proceedings of the Universities Power Engineering Conference. Vol. 37 2002. p. 23-27.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Kakinoki, T, Yokoyama, R, Fujita, G, Koyanagi, K & Funabashi, T 2002, Coordination of torsional controller for turbine-generator system operation. in Proceedings of the Universities Power Engineering Conference. vol. 37, pp. 23-27, UPEC 2002, 37th International Universities' Power Engineering Conference, Stafford, 02/9/9.
    Kakinoki T, Yokoyama R, Fujita G, Koyanagi K, Funabashi T. Coordination of torsional controller for turbine-generator system operation. In Proceedings of the Universities Power Engineering Conference. Vol. 37. 2002. p. 23-27
    Kakinoki, T. ; Yokoyama, R. ; Fujita, G. ; Koyanagi, K. ; Funabashi, T. / Coordination of torsional controller for turbine-generator system operation. Proceedings of the Universities Power Engineering Conference. Vol. 37 2002. pp. 23-27
    @inproceedings{d6385b2e07ee48ee8ddce96b43b9210c,
    title = "Coordination of torsional controller for turbine-generator system operation",
    abstract = "Under the action of disturbance in power system, turbine-generator shaft are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in an actual generation system is difficult technically. On the other hand, measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a parametric analysis for shaft torque estimator based on observer against changes of load conditions in-house type generation system. Firstly, this paper proposes shaft torque observer for rotating type generation system, and discusses about relation between observation signals and accuracy of the estimated values. Secondly, a parametric analysis is conducted for shaft torque estimator against load change.",
    author = "T. Kakinoki and R. Yokoyama and G. Fujita and K. Koyanagi and T. Funabashi",
    year = "2002",
    language = "English",
    volume = "37",
    pages = "23--27",
    booktitle = "Proceedings of the Universities Power Engineering Conference",

    }

    TY - GEN

    T1 - Coordination of torsional controller for turbine-generator system operation

    AU - Kakinoki, T.

    AU - Yokoyama, R.

    AU - Fujita, G.

    AU - Koyanagi, K.

    AU - Funabashi, T.

    PY - 2002

    Y1 - 2002

    N2 - Under the action of disturbance in power system, turbine-generator shaft are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in an actual generation system is difficult technically. On the other hand, measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a parametric analysis for shaft torque estimator based on observer against changes of load conditions in-house type generation system. Firstly, this paper proposes shaft torque observer for rotating type generation system, and discusses about relation between observation signals and accuracy of the estimated values. Secondly, a parametric analysis is conducted for shaft torque estimator against load change.

    AB - Under the action of disturbance in power system, turbine-generator shaft are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in an actual generation system is difficult technically. On the other hand, measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a parametric analysis for shaft torque estimator based on observer against changes of load conditions in-house type generation system. Firstly, this paper proposes shaft torque observer for rotating type generation system, and discusses about relation between observation signals and accuracy of the estimated values. Secondly, a parametric analysis is conducted for shaft torque estimator against load change.

    UR - http://www.scopus.com/inward/record.url?scp=1442352286&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=1442352286&partnerID=8YFLogxK

    M3 - Conference contribution

    VL - 37

    SP - 23

    EP - 27

    BT - Proceedings of the Universities Power Engineering Conference

    ER -