Current status of high temperature superconducting cable demonstration project

Takato Masuda*, Shoichi Honjo

*Corresponding author for this work

Research output: Contribution to journalReview articlepeer-review

Abstract

An HTS cable demonstration project has started in 2007. The cable has 66kV/200MVA capacity and 200-300 m length. It will be installed and operated at Asahi sub-station in Yokohama in 2011. Bismuth-based HTS wires with twisted superconducting filaments are used for the cable to reduce the AC loss. In 2009, a 30 m cable system has been constructed and tested to verify the assembling technologies of the cable, a joint and terminations and their performance. This paper describes the overview and current status of this project.

Original languageEnglish
Pages (from-to)1282-1285
Number of pages4
JournalIEEJ Transactions on Power and Energy
Volume129
Issue number11
DOIs
Publication statusPublished - 2009
Externally publishedYes

Keywords

  • AC loss
  • Demonstration test in power grid
  • High temperature superconducting cable
  • Short-circuit current

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Current status of high temperature superconducting cable demonstration project'. Together they form a unique fingerprint.

Cite this